.Loading..Loading.

Readme Rev

EXCEPT AS RESTRICTED BY LAW, THE SOFTWARE PROGRAMS CONTAINED IN THE PATCH ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, TITLE OR FITNESS FOR A PARTICULAR purposE.

Service Updates

When the downloaded patch is run, it will extract to a folder and there will be zip files. Those files should be extracted and then Setup.exe can be run. This table outlines the names of the zip files and where they should be run.

Component	Core/Console	Client

The following outlines instructions for installing this update.

This patch requires that Ivanti Endpoint Manager 2020.1 be installed. For more information about current service packs please see Ivanti Community Doc 1001

Installing on the Core and Rollup Core

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Prior to installing a patch on the Core Server it is recommended to make a backup of the Ivanti database.

Steps

Disable any services on other machines that interact with the Core Server
Double-click on the self-extracting executable and extract it
Extract the files for the Core patch
From the extracted files, run Setup.exe
When Setup completes, reboot the machine if a reboot is required
After applying the patch, you may need to re-activate your Core Server using the Core Server Activation Utility
Restart any services stopped in Step 1

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Installing on Remote Consoles

A Remote Console is any machine that is not the Core Server and has the Ivanti Endpoint Manager Console installed. Console Machines need to be updated to be able to connect to the updated Core Server and Database.

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Steps

Close the Console
Double-click on the self-extracting executable and extract it
Extract the files for the appropriate patch
From the extracted files, run Setup.exe
When Setup completes, reboot the machine if a reboot is required

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Updating the Agent

The patch should be installed on the Core Server before updating Agents

Use one of the following methods to re-deploy the agent once the patch has been applied to the Core or to apply the patch manually.

Methods of agent deployment

Manual: Map a drive to \\Coreserver\ldlogon and run 'wscfg32.exe -f'
This is used for single client installs and testing
Push: Schedule a push of the full agent
Self-Contained EXE: Create an EXE that can be installed
Advance Agent: This is a two stage process. The Advance Agent consists of a small MSI and a self-contained EXE. The MSI is deploy to the client and then the MSI downloads and installs the EXE. This allows for bandwidth friendly downloads.

For more information on agent configuration and deployment see Ivanti Community Doc 23482

Manual installation of the client patch

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Double-click on the self-extracting executable and extract it
Extract the files for the appropriate patch
From the extracted files, run Setup.exe
When Setup completes, reboot the machine if a reboot is required.

Updating the Agent With Patch Manager

Ivanti Patch Manager can also be used to update agent machines with the patch. Content and definitions can be found in Patch Manager as Ivanti Updates and can be used to detect and repair agents that have not been updated. The Core Server must be updated with the Core patch before updating agents.

Not all Component Patches will have Patch Manager Content created. Once it is generally available, this method can be used to update agents. For more information about updating agents using Ivanti Patch Manager see Ivanti Community Doc 24384

Please review the following important information about this release BEFORE installing this update.

Feature Changes and Updates

The following features have been changed or updated

Alerting

Improve e-mail(smtp) options for Alerting
- https://forums.ivanti.com/s/article/How-To-Configure-Email-Alerting

AntiVirus

Add Cisco AMP AV provider
- -
Refactor TrendMicro AV provider to support Enterprise versions
- -
AntiVirus 2017 Device Control module updated
- -

Client Notifications

Windows Notifications for RC Server UI (508 compliance)
- -
Implement Ivanti Notifications Manager
- -
Install Toast Notifications Manager on Core
- -

Endpoint Security

Isolate more than one computer at a time
- -
Add specific EPM permission to isolate/recover a device from the network
- -
Add auditing support for EPS network isolation
- -

Inventory

Detect Windows 11 OS in inventory
- EPM will now properly detect Windows 11 in inventory.
Add Windows Server 2022 detection to the inventory scanner
- EPM will now properly detect Windows Server 2022 in inventory.
Add Display Version to Inventory for Windows OS
- -

Linux

Main Linux Agent config UI changes
- -
Add Linux settings to Distribution and Patch Agent settings UI
- -
Add Linux settings to Inventory agent settings UI
- -
Add Download File, Execute File, and Continue on Failure to Bootix templates
- -
Create new Execute Shell Script action for Bootix templates
- -
Client Connectivity Agent Settings For Linux
- -
Support Cloud Services Appliance (CSA) in the Linux Agent
- -
Autofix based on Patch Groups (Scope)
- -
Ubuntu 20.04 support
- -

Mac

Enable / Remove activation lock
- -
APNS: Create APNS Cert from new console UI
- -
VPP Apps now available for Portal Manager
- https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-ios-portal
Add QR code for iOS enrollment - Code
- -
Reset EPM Agent using a MDM Package
- -
Added support for MacOS 11.0 "Big Sur"
- -
Add AD Sync to Right Click option - Solves Primary Owner attributes not populating on iOS devices
- -
Provide a means to rename an Apple MDM device in the EPM database
- https://forums.ivanti.com/s/article/What-s-new-for-macOS-in-EPM-2020-1-SU3
Update putty, pscp & plink to 0.73
- -
Add search functionality to CPE
- https://forums.ivanti.com/s/article/What-s-new-for-macOS-in-EPM-2020-1-SU3
Replace PuTTY tools for remote agent deployment with Windows built-in ssh and scp tools
- -
MDM Enroller - Universal Link Support - App Support
- https://forums.ivanti.com/s/article/What-s-new-for-macOS-in-EPM-2020-1-SU3
iOS MDM Enroller - Add support for App Clips
- https://forums.ivanti.com/s/article/What-s-new-for-macOS-in-EPM-2020-1-SU3
Added capability for Additional Files in Mac Software Distribution
- -
New macOS CPE Payloads: com.apple.system-extension-policy
- -

MDM

New iOS MDM Enroller submitted to iOS App Store
- -
Create new column sets for MDM as defaults in EPM columnset UI
- -
Remove MDM Compliance agent settings
- -
MDM Configurations- Create new general direction and content for initial MDM user
- -
Android extension app
- -
Add enrollment policy option for Windows scheduled task
- -

Patch Automation

Patch Automation Feature Phase 1
- https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-patch-automation
New Contextual Menu for step machine summary
- -
Changes at step level - Vulnerabilities node
- -
Change task name
- -

Patch Manager

Add "Enable directory browsing" option to the office 365 patch utility
- -
Fallback to the latest version found on the core when using HTTP
- -
Support download patches from vendor via VPN
- -

Provisioning

Add option to control reboot check in "Deploy Software" action in Provisioning
- -

Remote Control

Remote Control RCViewer - UI Full Screen and Alt-Tab Support
- https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-remote-fullscreen
Enhance RC HTML5 to support NTLMv2 Authentication
- -
Add DNS name into the client certificate (in case of no windows domain) for RC verification in browser
- -
RC Session recording
- https://forums.ivanti.com/s/article/Remote-Control-Video-Recording-Feature

RTI-Monitoring

Can't open real-time inventory and monitoring from the network view if IE is not installed
- Now if no web browsers are installed at all, the user will be greeted with an informative message when trying to open "Real-Time Inventory and Monitoring" and when multiple browsers are present the url is opened with the system's default web browser (supported browsers are : Internet Explorer 11, Microsoft Edge, Opera, Mozilla Firefox, Google Chrome)

Software Distribution

Enhanced reboot notification on Windows 10 and Windows Server 2016 and 2019 to use Windows Notifications
- Requires Windows 10 1903, Server 2016, or Server 2019 and later versions. Agents will automatically fall back to legacy reboot prompts if version specs are not met. https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-reboot-ac
MSIX - Client install support
- https://forums.ivanti.com/s/article/How-to-deploy-MSIX-and-APPX-packages-in-Ivanti-EPM?language=en_US
Update DistributionAPI for device status with in a given task for installing a SWD package.
- -
Update DistributionAPI to return the folder\bundle organization of the SWD packages in EPM
- -
Update DistributionAPI to add ability to do a delayed start on a SWD push or policy job
- -

Web Console

Remove remaining flash from WebConsole/Server Manager
- https://forums.ivanti.com/s/article/Remove-Adobe-From-Real-time-Inventory-and-Monitoring

Win Console

Enhance Windows Console to Validate Certificate when Connecting to EPM Core Server
- -
Remove default behavior for expanding "My agent settings" under Agent Settings
- -
IT Analyst Workspace - EPM Integration - Bitlocker
- -
Onboarding - Setup MVP Video based pages
- -
Change Console to get BitLocker info from the web api
- -
Removed Adobe (Shockwave) Flash / Flex which goes End of Life in 2020
- https://forums.ivanti.com/s/article/Remove-Adobe-From-Real-time-Inventory-and-Monitoring

Defects Fixed

Agent

640822 Remove Unsupported Agent Configuration from EPM Console
- Remove the HP ThinPro Linux configurations from the core as they are no longer supported.
645663 Advance agent deletes existing broker certificates
- Modified cba8cleanup.exe to save and restore the broker.csr file. With this file missing on a reinstall, brokerconfig /n thinks the certificate is not present and deletes the existing certificate and gets a new one.
647649 Addressed potential rights elevation issue
- Security enhancement to prevent permission elevation.
664649 fwregister.exe does not add MTFTP Windows Firewall exception for Win10 devices
- Fixed issue related to fwregister not putting firewall exceptions for services like MTFTP that would start, but stop quickly due to no work to do or not being a CSEP elected device.
674237 Standalone Agent Install executable does not request to elevate rights when launched
- Fixed the Windows standalone agent install to automatically attempt to run as administrator with elevated rights.
677311 Client machines are getting CISMBIOS.sys warning messages in event viewer (event ID 54)
- CISMBIOS errors in the Windows Event Viewer: “The CISMBIOS service failed to start due to the following error: The filename, directory name, or volume label syntax is incorrect.” should not occur anymore.
688543 NTStaCfg.in# is incorrect leading to missing tasks that lead to connectivity issues on the client
- The EXEC entries in the agent config ini files (e.g. ntstacfg.ini, default windows configuration.ini, etc) must be unique per section, and there was a duplicate exec number (EXEC305 in the [Common Base Agent Post Copy] section) which caused the second entry to be ignored. We modified the file so there were no duplicates.
691985 When a team user clicks "Rebuild All", if the agent configuration uses settings the user does not have access to it sets the RC setting to the default setting
- Fixed an issue cause by clicking "Rebuild All " for agent configuration by a user who has limited rights. It no longer set the remote control setting back to default.
714409 LDAPS-only environments cannot run ldapwhoami if they have to set Use LDAPS to Never to avoid smart card prompts
- If detected that smart card is configured, use anonymous connection to open LDAP object in TLS channel.
738856 Adaptive Settings - "Exception: The remote server returned an error: (418)." when creating a new trigger for Geofence.
- A server-side change by the map provider prevented maps from showing in some regions when configuring a geofence in Adaptive Settings. Adaptive Settings was updated to accommodate the change.
743170 Purgefile.exe crashing repeatedly
- Needed to add the latest build into the installer. The old file was being used and some of the virtual methods had changed on some dependent code.
750892 Cannot use AddDirectoryToDownloadSet without specifying a destination directory
- Modified code to check for NULL destination directory string before accessing.
761694 Addressed issue from CVE-2020-13771
- -
766483 EPS Cancel button is missing when change protection level in Chinese core
- We have provided a fix for the customers with EPM installed in Chinese where on the agent side the EPS "cancel" button is missing when changing the protection level.
766540 Download for Advance Agent fails when using https path
- There was some logic that was only checking for http:// not https://. Also switch to use the full curl library rather than the no_ssl library.
775404 Vulscan is removing CatalogURL setting
- Vulscan no longer removes CatalogURL settings on macOS
790208 Addressed issue around core agent communication
- -
795161 Addressed issue around agent communication
- -
797620 Old Ivanti Notification Manager doesn't get uninstalled after updating from SU2
- The Ivanti Notifications Manager installer was updated to fully replace previous installations of the component.
797655 'Ivanti Notifications Manager' install calls a reboot directly on the system.
- Added the suppress reboot flag to the notifications manager install.
817444 Downloader (lddwnld.dll) may fail to get credentials for servers that have the port number after the server name in the URL.
- If the host name in the request has :443 or :80 after it, and the request required credentials, it would fail to get the credentials. This is because the servername:443 or servername:80 was sent to the core requesting credentials. With this fix we strip of the :port from the servername before requesting credentials.
828257 Our third party FDI library is unable to extract files from a specific agent package cab
- -
832828 Advance Agent: Peer-to-peer download not working over wireless networks
- Advance agent runs before agent settings are available, so modified the default for allow multicast on wireless to be true. This will allow peer discovery on wireless networks to work for advance agent.
835611 Proxyhost.exe is unable to verify certificate chain for non self-signed certs, preventing all communication
- -
842102 Agent Deployment may not correctly install the management agent service after 2020.1 SU4 update
- -

Alerting

678010 Alert service crashing due to blank computer device ID in database
- If by any means a computer device ID would end up being null in the database, the alert service will not crash.
707652 Alertsync.exe is calling lddwnld.dll repeatedly, and re-downloads the Alert Settings
- Alerts behavior (alert rulesets) will not unnecessarily be downloaded if there are no updates
715572 Windows 10 LTSC Real-time Inventory and Monitoring compatibility issues in browsing Applications Logs
- Real time Inventory and Monitoring Agent Option displays correctly Application Logs. UI shows the next number of pages and records as expected.
720864 Not possible to kill processes using Real time monitoring and inventory in environments without DNS
- If hostname resolution is not available but direct IP communication is available, commands to kill processes from the RTM/web console is possible now.
803058 Send syslog action on certain alerts fails.
- Some application control alerts were not properly sent to a syslog server. Such alerts should properly reach the syslog server now.
805839 SMTP alerting network port setting feature is by default set to 0
- SMTPs for alerting will default to port 25 instead of 0.
817223 When using the Service Filter option to search within 'Service Monitoring' rule the settings do not save properly.
- Search Service Filter now allows to change the filters and to add new selection, without overriding the existing one.

AMT\vPro

652728 Intel KVM not working in Windows 10
- Intel KVM is now working with Windows 10 in some environments. For customers who still can’t get KVM working, follow the instructions on https://forums.ivanti.com/s/article/Intel-KVM-not-working-in-Windows-10
722751 Updated OppenSSL files
- -

AntiVirus

572578 AV-100 not detecting Bitdefender Antivirus
- Vulnerability AV-100 fails to detect Bitdefender Endpoint Security Tools as installed on an endpoint.
600650 McAfee Anti-Virus 10.6 not returning full info to inventory
- McAfee Antivirus versions greater than 16.0 will be shown in Inventory.
654168 LANDesk Management - Agent Settings - Ivanti Antivirus 2017 folder shows in inventory tree even without it installed
- Ivanti Antivirus 2017 folder is created in Inventory under LANDesk Management > Agent settings in the EPM console for agents on which Ivanti Antivirus 2017 is not installed.
669568 Proxy settings do not come from EPM Management Console to Bitdefender Update server(generalsettings.xml)
- In some cases, the configured proxy server is not used by the Antivirus Update Server.
674793 Vulscan shows AVNewBehavior setting showing up twice when updating latest settings
- Vulscan shows AVNewBehavior setting showing up twice when updating latest settings.
701652 Ivanti Antivirus BD v6.6.18.265 - Failed to get last update time - change text
- Wrong last update time message for Ivanti Antivirus was changed to provide accurate information.
708701 Crowdstrike Agent Not Reporting Properly - "CrowdStrike does not report the device as protected"
- Due to mismatching IP addresses reported by CrowdStrike in relation to EPM, some agents would show up in the Crowdstrike Report with duplicate entries. We have provided a fix to address that situation.
716707 AV 2017 folder protection exclusions don't work when using variables
- Cannot use some custom variables with folder exclusion in Ivanti AntiVirus 2017 Agent Settings.
725516 Selecting Manage Devices for Crowdstrike integration gets the error" Connection failed object reference not set to an instance of an object.
- Reported CrowdStrike Managed Devices with null fields defaults to empty values.
740648 Inventory scanner not collecting all info for ESET antivirus 7
- ESET Antivirus version 7 information will show in Inventory
748412 USB Printers Getting Blocked by EPS on Win10 2004 Version
- -
780662 Add enable Network/Traffic scan option in agent settings
- We have reorganized the Network/Traffic scan options in Ivanti Antivirus 2017 agent settings.We have also added the option to toggle on/off the Network/Traffic scan feature.
789289 Unable to connect the CrowdStrike EU api in EPM Console
- We have implemented CrowdStrike tenant selection based on region in the CrowdStrike action center.
792291 Pattern files out of date - submitavdata switch failing with error 16389
- Fix for certain scenarios where updating pattern files for Ivanti Antivirus 2017 on endpoints, fails with error 16389.
806251 Unable to delete quarantined files ("Clear in selected computers")
- Quarantined files can be deleted from the Endpoint Manager console.

API\SDK

717943 DistributionAPI - Deleting a software distribution package that is a dependency of another package should throw an exception
- The Package endpoint in the DistributionApi (DistributionApi/api/v1/Package(id)) will now not allow users to delete a package that is a dependency of another package. If you try to delete a package that is a dependency, you will get a response back that explains why the package can't be deleted and which package(s) have it as a dependency.

AV

814867 Windows Defender antivirus data is being gathered incorrectly
- Windows Defender data is gathered and displayed correctly in Inventory by looking up a different reference file.
852600 Archives setting is enabled on client when it is disabled in the AV setting.
- Enable Archive setting was incorrect mapped to Bitdefender parameter.
853536 Vulscan /submitavdata deletes entries from Antivirus Table
- Antivirus Table entries are no longer deleted when vulscan /submitavdata is triggered.

Cloud Services Appliance

662731 BrokerServiceActivity.log is not getting controlled by MaxSize setting in BrokerServiceConfig.xml as it should.
- Fixed an issue so that the BrokerServiceActivity.log log file is controlled by MaxSize setting in BrokerServiceConfig.xml as it should.
732275 Disable TLS 1.0 with RC WS and the Tunnel
- Disabled TLS 1.0 and 1.1 in the remote control tunnel.
778136 BrokerServiceActivity.log is not getting controlled by MaxSize setting
- BrokerServiceActivity logs are now rolling logs.
793760 Broker Service crashing often
- Fix for an error in the logging logic that could cause an exception.
815721 Agentless Remote Control fails to connect
- Fix for Agentless Remote Control not working.

Core Sync

725897 SchedPkgUpdate does not recalculate SHA256 hashes if the MD5 hash is still present
- Schedpkgupdate.exe was fixed to check the sha256 column when determining if a package needed to be re-hashed. Note that schedpkgupdate.exe is automatically run every 30 seconds by the scheduler, so there could be up to a 30 second delay before package re

CSEP

769918 PXE Elect may not work after installing SU2
- Fixed issue that prevented PXE server election to work correctly sometimes.
799441 Error message 'Ending IP address less than starting IP address' when creating a trigger that contains all IP addresses
- An issue with comparing IP addresses in the Adaptive Settings trigger editor was fixed.
858683 CSEP Debugging functionality should only be included in Debug Builds
- After a report that a customer had seen packets sent to that port used for the debugger we removed the debugger code.

Data Analytics

494308 Column Size & Type are specified on the Windows Console(GUI) are not included in an actual database table.
- When using nvarchar data types in the custom data forms the database will reflect the correct column size for the custom field.
531874 Archiving Linux devices to Asset Control generates errors
- -
644110 Dell Warranty rule is giving 401 error
- Due to the Revamp of the new Dell API, we've updated the Dell Warranty rule to accept a client id and client secret to receive information from dell. To use this, please create a new Dell Warranty rule and supply your Client ID and Client Secret, and apply an appropriate schedule for the rule, in order to use the new features. Currently, this rule does not support the 'Real-Time' functionality of DA so it is recommended that it be scheduled for now.
690073 "Allow free text typing" does not work in Barcode web forms. The form fails with a NullReferenceException error
- The Barcode forms are now loading in the browser as expected and an item in the dropdown list can be easily found by typing its name.
711288 ESX host giving an error: 'Object reference not set to an instance of an object'
- fix for a possible exception when refreshing VOS hosts in the EPM console.
727075 Adding SNMP Login in Data Analytics is not working for SNMPv1 and SNMPv2. SNPMv3 works.
- -
727647 DA "Delete Duplicate Computers" rule deletes all devices
- The "Delete Duplicate Computers" cannot be run when no duplicate rules are detected.
737244 Installation of LDDA Discovery Services Remote Agent is failing
- Fixed Remote Agent Installer so that it can install silently.
757592 Using 22 or more Asset Control queries in DTS rules configured as targets returns "no targets" even when the queries return results as expected.
- The DTS rules can be used now with as many Asset Control queries as needed, not being limited to 22 queries anymore.
759416 Attributes does not exist Device.SNMP Data.Login Name error in Data Analytics Discovery Services when executing SNMP scan
- The error is not thrown anymore and The SNMP Login Name is saved alongside the other SNMP data.
763614 Discovery Services duplicate attributes not saving properties
- The duplicate settings for discovery services are now successfully saved.
795481 Data Analytics Discovery Services Remote Scanners not running on a schedule
- After restarting the service, the scheduled task will run at the mentioned time, updating the log file.
796139 DTS Import Data "Don't overwrite existing values" does not work
- When running an Import Data Rule with the "Don't Overwrite existing values" option checked, the already existing attributes are not overwritten anymore.
798106 Aggregate Data rule defaults to Management Suite when saving.
- The Aggregate Data rules can be successfully saved now with the "Asset Control" option.
799112 Asset Control SNMP Entries Freeze Console
- The SNMP Entries tree loads fast, without freezing the console.
803132 Executive Report Pack Not Sending Emails
- Executive Report Pack Schedueled Emails are now working for the following ports: 25, 465, 587.
810135 DA's "SoftwareManager.exe" doesn't respect start-up time configured in its config-file.
- SoftwearManager is now working as expected and respects the start-up time set in the configuration file.
816550 SNMP Scan Fails When Run with "All" Group Selected in the Configuration
- When running an SNMP Scan configuration that has the "All" group selected, all the OIDs that exist in Discovery Services will be gathered for the scanned devices.

Device Discovery (UDD / XDD)

794610 UDD on NT Domain triggers NMAP scan as well
- Removed redundant UDD scanning technology for NT Domains.

Endpoint Security

662928 USB Volume will be added to the Known Volumes during Vulscan
- -
667614 AMHelper.exe is deleting Appsense configuration file "configuration.aamp" then stopping Ivanti Application Management service from Appsense
- Cannot change Application Control configuration using EPM task if appcontrol agent was a stand alone installation.
668729 When EPS settings are copied from "All settings" to a users "My settings" the last saved by user changes to the user who copied the setting.
- When EPS settings are copied from "All settings" to a users "My settings", the last saved by user of the original settings changes to the user who copied the setting. It also changes the last save date of of the original settingsto when the setting was copied.
669098 With EPS enabled updating Windows 10 from one version to another fails
- Endpoint Security real-time file analysis may cause sharing issues with files located in C:\$WINDOWS.~BT\ preventing the Windows upgrade to complete correctly.
691201 Privilege Management - security activity overview empty
- Security Activity - Privilege Management displays events overview.
692361 Remote Console Unable to Isolate Device
- Unable to Network Isolate an agent from Remote console if the user is not Landesk Administrator
708988 Invalid privilege management configuration
- Privilege Management configuration import may fail if it contains some Chinese characters.
738063 Endpoint Security Agent causes BSOD on VECTRA ISP
- Ivanti Agents with EPS enabled will encounter BSOD if the computer is connected to the VECTRA ISP. (VECTRA is an ISP in Poland)
776016 Device Control Blocking SCSI Devices
- We have fixed and issue where secondary storage volumes or partitions on a computer are not accessible if the DCM setting is deployed with Read-Only, Encrypted or No Access security level.
783680 BSOD on some clients with EPS installed.
- We have provided a fix for a certain scenario where computers with the EPS component enabled may experience BSOD.
793704 Registry keys under HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\landesk\... can be modified with EPS installed
- Certain Endpoint Manager registry keys cannot be edited anymore, for security reasons.
799069 EPSUI crashing
- Fix for possible EPSUI crash under certain scenarios.

EPS

834966 EPS- Unable to import Application File List properly
- Updating LANDeskTrustValue & OverrideTrustValue with the imported values. CSV files are now imported from Application File List.

Inventory

440405 Inventory data for "Server Roles and Features" is garbled
- Fixed issue where Server Roles and Features data in Inventory was being converted twice to UTF8 for transport. Now gathers it correctly.
487440 The primary owner is displayed with dbcs characters on some devices
- Enhanced ldapwhoami.exe with full Unicode compatibility so that primary owner data would be reported correctly for double byte languages.
514609 Services (680) - Flush map file new.jfm shows up randomly in the Event Viewer
- Fixed an issue where ESENT events showed up in the event log when the inventory scanner runs on the EPM core server.
598980 Corruption on french core servers freezes and the console when it is linked with a rollup core
- Modified the query name and logs columns for tasks so that they aren't part of inventory when tasks are refreshed.
639910 Inventory OU output contains invalid characters
- Enhanced ldapwhoami.exe to support Unicode for AD data. For eDirectory use it uses MBCS.
667222 Computer.Processor.Processor Count Not Accurate
- The Windows inventory scanner was enhanced to report the following values by retrieving the values from WMI: "Computer"."Processor"."Package Count""Computer"."Processor"."Package Cores"
671458 "Detected Vulnerabilities in Last N Days" report not returning any results
- Changed the "Detected Vulnerabilities in Last N Days" report to show detected vulnerabilities without being dependent of the vuldefs having the autofix flag. Previously if the vuldef did not had the autofix enabled it was not displayed in the report.
676203 Inventory Server Service does not appear to remove orphaned Fileinfo entries at start service start time
- When there are too many orphaned fileinfo records, the inventory service will now clean them out in stages so that the queries do not timeout.
694020 Event ID 4100 Errors in Event Viewer - Increase Column Sizes - Database
- Increased some column sizes in the EPM database where we have had customer data that exceeded the current column size. Tables affected:BiosSettings,EnvironSettings,PeripheralAdapters.
710371 Inventory Server does not use parameterized queries to load data when processing scans
- As a performance optimization in MS SQL, the Inventory Service data loading has been modified to to use parameterized queries.
714218 DeviceID visible in database and in client registry are different for same device. Multiple duplicate sourceid's in the restoreids table.
- Fixed issue to avoid having duplicate sourceid's in the restoreids table in the SQL database which caused the loading of device ID's that needed to be restored to fail in the web service (ScanInstructions).
716576 ESENT Errors in Event Viewer when inventory scan is ran
- Fix for ESENT errors on Windows client machines in the event viewer when the inventory scanner runs.
723840 Softmon.exe handle leak - number of handles growing constantly over time.
- Fix for a handle leak in softmon.exe.
728630 'Full Name' in DBCS is garbled in Inventory tree.
- The "Full Name" attribute in EPM Inventory now supports DBCS characters to avoid what appeared to be garbled characters.
731366 Inventory should truncate application error results to less than or equal to that of the length that won't cause it to go to errorscan
- In EPM Inventory, "Application Errors - Application Name" is now truncated to 100 characters max to avoid failures when trying to store the data in the database.
734330 Amazon EC2 machines are being identified as Servers instead of Virtual server
- Fixed the Windows Inventory scanner to properly identify EC2 machines as virtual servers.
735346 Inventory scanner returns incorrect IP address (home network instead of VPN) intermittently
- Fix for inventory mini scans to send direct to the core server so that network interface changes are reported correctly.
752558 LDISCN improperly reading OU's with Latvian characters
- Fix to handle wide characters in the "Computer Location " field to better handle international languages. The other fields related to OU's were already upgraded.
773162 Inventory Server Service may struggle with processing inventory scans
- Added indexes to some inventory tables so that deadlocks would be prevented during scan processing.
773538 LDAP machine group membership disappearing
- Fixed inventory scanner and ldapwhoami.exe to still get machine related LDAP info if scanner running as local system without a user logged into the machine.
773643 Inventory shows unknown for chassis type on Lenovo ThinkPad X1 Yoga 3rd
- The business impact is that in ISM Asset Management there are different lifecycle flows for portable devices and desktops and the Chassis type 32 devices are added into the wrong workflow. This needs to extra validated and remediated which means time and money
773702 Error inserting inventory: Error: Computer.Mass Storage.Drive Encryption.Encryption Mode is an unmodeled one-to-many relationship.
- modeled Encryption Mode in Drive Encryption
790436 MBBScanner.exe crashes when scanning Device with SIM Card
- MBBScanner.exe will now remove newline characters from the discovered data to accommodate processing.
791206 Real-time monitoring and Inventory: Russian characters displayed as "?" in Event Viewer logs
- Real Time and Monitoring Logs > Application logs for Russian characters are correctly displayed.
793629 Panda AV not displayed in Inventory Record
- Panda Antivirus solution will be properly reported in the Inventory record under Security>Antivirus Software
796846 Duplicate Inventory Attributes have been created
- Fix for duplicate meta-data being added when using an English remote console with a core of a different language.
798471 Windows Server 2016 detected as Microsoft Windows 10 Server Standard Edition
- A fix to detect Windows 10 mulit-session caused our detection of Windows Server 2016 to report incorrectly. That has been fixed.
803623 Software - Data Files - File Size Can't Handle Large Numbers
- Get accurate data file sizes when the files are more than 4Gb in size.
810642 Computer Static Location in the Registry is written in European alphabet, but in inventory it is showing up in Chinese
- Fix to handle wide characters for the Computer Static Location data
813589 Duplicate FileInfo records from the same file with the same hash
- Fix to get a consistent file version. There was a bug in the parsing of the ldappl3.ini file when the version had a "," in it.

Licensing

692366 Product activation not working - Some network security appliances block IE traffic prior to version 11
- Removed the "MSIE 6.0" header from the Activation HTTP request to avoid getting incorrectly blocked by some network security software.
715545 Product activation not working - large activation requests being swallowed
- A change was made to fix an issue with some EPM core servers not being able to activate when the activation file was large.

Linux

650574 Unable to Push Linux Agent with Non-Root User
- The linux agent prevents a two installations from running at the same time by placing a lock file in one of several directories (/var/lock, etc.) The first directory that exists in the list is used, but an unprivileged user may not have permission to write the lock file in the chosen directory causing the script to fail. The lock file is now written into the /tmp directory where an unprivileged user has permission to write.
656499 Custom Scripts do not work with Linux clients after 2019 SU3
- A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
656500 SWD / Policies fail with 2019 SU3
- A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
659767 Ubuntu Workstation /UI does not run scheduled inventory, vulscan, etc from the expected crontab
- The script to configure the crontab was run with a flag to terminate the script in the event of an error to protect against writing a bad crontab entry. When reading the current crontab, modifying, and rewriting it, a command returned a non-zero code and terminated the script. The non-zero return code was not a failure, so the command result was modified to allow the script to continue and correctly write the crontab.
663911 Linux shell scripts do not handle file redirects > or >> properly
- In some cases, the command was being run without the context of a shell. The command needed the shell context for file redirect to be interpreted correctly. All shell scripts are now run in the context of a shell.
669074 Vulnerability Scans consuming Excessive CPU on RHEL
- The underlying issue is a handful of security tests which scan the entire harddisk. In this instance the scanned disk was an large nfs mounted disk. The issue will have to be resolved by a change to content to not search nfs mounts; however, customers can disable the security tests on the core to avoid the issue.
669251 Linux agents missing Network TCPIP Address
- The missing TCPIP fields were added to the inventory.
669282 Pull install appears to complete successfully but the machine never appears on the core: Raspbian 8
- A gcc optimization bug was preventing raspian 8 from completing successful.
670920 Pull install appears to complete successfully but the machine never appears on the core: AIX7
- A regression in the sharedtech communication library (cba8) did not allow AIX to properly find the executable path which is used to load the cert file for communication with the core.
679013 pds2d runs with elevated privileges under systemd
- When removing the pds2 dependency on xinitd and moving to systemd, debian's version of systemd did not support running as the user nobody. A regression removed the user nobody, but didn't replace it with a new unprivileged user. This repair creates an unprivileged ldnobody user and runs pds2 as that user.
683276 Nixconfig installs missing package successfully but fails with installation error
- Variables in a shell script are global to the script. A return value variable inadvertently changed a variable with the same name in a calling function.
690459 PolicyEngine locks pid indefinitely if process is killed prematurely
- An exceptional failure would leave the pid file indefinitely on the agent preventing future policy runs. A stranded pid file is now correctly removed if it is no longer related to an actively running policy.
694137 Software Distribution fails on Ubuntu 20.04
- A typo in the debian dpkg installation of pds2 used the rpm symbol for expansion rather than the dpkg symbol which caused pds2 not to be correctly launched on ubuntu 20 systems.
700187 AIX is unable to send inventory to an EPM 2020 Core
- A regression in the sharedtech communication library (cba8) did not allow AIX to properly find the executable path which is used to load the cert file for communication with the core.
701496 AIX Inventory Scan provides multiple primary users
- The unix agent stores results in a sqlite database. A new primary user was added rather than updating the database entry, creating a list of primary users instead of one.
706169 Communicate software distribution status even after timeout
- The software distribution task that ran as a part of vulnerability had a 120 second timeout. Slow machines that require longer were timing out before the task completed. The timeout was extended to 960 seconds. On timeout, the status is correctly repor
725522 Console - Linux Agent Configuration - Core Server reference change is not saved.
- The Linux agent configuration dialog now correctly loads the core server name from the agent configuration, instead of displaying the default value.
726239 Alarm went off message in the Inventory Scan log
- In some situations, network inventory can run afoul of a 5 minute network timeout. The expected timeout for inventory was 30 seconds. The timout has been increased to 10 minutes to accommodate hitting the network worst case timing.
753793 Linux agent installation failing after EPM 2020.1 SU2
- Two new parts of the installation script assumed the output would be in english and failed to parse a different native language. The script sets the C locale for consistent language processing.

Mac

540479 Script deployment packages for Mac may not return error codes properly
- Previously, script deployment packages for macOS device did not return error codes properly. We only reported if the command succeeded or failed. If the script said "exit 0" we would report success. Whether the script said "exit 1" or "exit -1" or "exit
593266 Crash in LCFolderManager when two threads call FetchFolder concurrently (actual crash in PortalManager)
- Fixed a problem that could sporadically cause PortalManager to crash when updating policies.
598798 Portal Manager not "Aware" that OSUpdates have completed - Reboot issues
- Vulscan was updated so that if a patch, such as a patch to macOS, reboots the machine during the installation process, it will be launched after the reboot with the same parameters as before. If the patch was successfully installed, the status will be rep
623842 Portal Manager progress doesn't look good in dark mode
- Software Download Progress in the OSX Portal has been improved for display in Dark Mode
635877 Empty prefs files left after uninstalling EPM agent
- -
636263 Catalina/DarkMode: various UI glitches for ldswprogress
- Ivanti Provisioning icon is compatible with dark mode. App switcher shows proper display name: "Ivanti Provisioning." The standard menu bar is visible when the provisioning window is front-most.
639362 Mac Agent not registering with the RC Tunnel
- -
645693 macOS patch doesn't report successfully done
- Vulscan was updated so that if a patch, such as a patch to macOS, reboots the machine during the installation process, it will be launched after the reboot with the same parameters as before. If the patch was successfully installed, the status will be rep
652725 LD download times out while trying to pull large files.
- File downloads associated with patch and provisioning were limited to 20 minutes. This is an unreasonably short time when macOS patches and installers can be 2 - 8 GB. This limit has been upgraded to 4 hours.
660425 Primary Owner attributes not populating on iOS devices
- When enrolling an iOS device we use the short name ( domain\username ) to asynchronously look up AD info on the domain for that username.This does require a user with, at least, read only access to the domain to have been added to EPM via the menu option "Configure> Manage Active Directory Sources... " to allow the AD lookup to take place.Since AD entries may change after a device has enrolled the administrator can also select, 1 or more, devices in the network view and use the Right Click menu option "AD Sync " to redo the AD info lookup.All lookups are done asynchronously, in essence the look up will be requested, and the database will be updated in the, on average, next few seconds. The administrator will have to manual refresh once the database has been updated.
661145 Client Data Storage grouping Devices together with NULL Serial Number Value
- The cause of this issue was a defect in the mdm inventory code. The inventory was being reported incorrectly, resulting in inventory records with null deviceIDs. In particular this caused issues when using Client Data Storage for storing FileVault recovery keys and other secured information. The defect in the mdm inventory code has been resolved, and a database script has been made available through technical support to repair databases which were affected by this issue.
674249 Create public key button in Add Apple DEP Token window gives missing cert error after EPM core upgrade
- -
691762 Filevaultonly enabled on Log off and not on Restart.
- Changes to "Security & Privacy" payload's FileVault section. This will allow to configure the payload with the "workaround" mentioned in https://forums.ivanti.com/s/article/Filevault-policy-does-not-apply-and-credential-prompt-appears-after-reboot-on-MacOS-Catalina directly by checking "Don't prompt user when logging out" and "Restrict number of deferrals" and setting the deferral count to 0. (macOS Catalina and later seem to impose this behavior - we cannot change the difference in behavior between Mojave and Catalina, but with this change, the necessary changes can be done directly in our config profile editor)
702449 Investigate Remote Control - AZERTY Keyboard Issue
- Mac RC now supports alternative keyboard language layouts, for example AZERTY keyboards. This can be especially important when typing passwords.
707189 LDAPM Segment Fault when going through CSA
- ldapm was crashing when running through a CSA, when the device was joined to a domain. Running through the CSA meant that most likely the device would have to use cached domain info when asking the core to resolve group membership for the device. Accessing the cached data was causing an object to be freed when it should not have been. This issue has be fixed
707651 Primary Owner field is missing in macOS inventory scans
- -
708626 CPE improperly limits size content cache to 2GB, which isn't that useful
- The Configuration Profile Editor, and then, the EPM core code that imports the created configuration profiles, limited integer data to 32 bits. This is too small a number to adequately represent items like disk size, cache size (for macOS content caching)
712480 Primary Owner attributes not populating on iOS devices
- -
727060 Unable to deploy iOS custom apps via VPP
- The 3rd party service we use to obtain information on applications in the Apple App Stores doesn't necessarily provide information about custom business apps distributable via Apple VPP. When the 3rd party service was unable to return information on an ap
735312 Mac agent does not upgrade for some machines
- The mac agent manifest package was edited so that if the installer is renamed to ivagent-reset.pkg instead of ivagent-complete.pkg it will first run the uninstallmacagent.sh script before installing the mac agent. In order to to do this, follow the stEndp
735318 Mac agent stops working after a random period of time
- Recent macOS changes have created issues for how our EPM macOS agent processes communicate with each other, causing some agent activities to stop. The communication issues between agent processes have been resolved in recent versions of the macOS agent. B
741819 ldiscan hangs if interrupted while trying to communicate to the core
- When communicating with the core, interrupting ldiscan can cause it to hang (for example, when the device is put to sleep by closing its lid, or when a user logs out, disabling wifi network connectivity). This can stall the local device scheduled inventor
746157 Mac RC Does not reconnect to the tunnel after waking up from sleep
- Fixed a problem where remote control connections configured to use a tunnel server failed after a Mac computer woke up from sleep.
752309 CPE shows no icon for some payloads
- Some missing icons have been added to the Config Profile Editor
761291 "\library\ launch agent\" directory on clients missing the following files: com.landesk.dispatch.ui.plist & com.landesk.dispatch.sui.plist
- An issue was fixed with the agent installer, which corrupted the Agent install under certain conditions.
761351 Small UI changes to Network settings and agent- Jim Hysall
- Small inconstancies in the UI for Agent app and the software download dialog on the core were addressed
770517 Safari.app inconsistencies in macOS inventory
- An inconsistency, in essence duplication, with data in inventory scans has been fixed
770791 iOS MDM Enroller: App Clip does not have a vendor id. 2nd device fails to fully enroll
- Fixed an issue that caused devices enrolled with just the App Clip to be only partially enrolled. MDM commands would not work on the device until the device is reenrolled using one of the workarounds below.Workaround: Download the app instead of using the App Clip (the option is displayed when the App Clip appears, or the user can download the App from the App store) An updated app has been sent to Apple and will automatically replace the App Clip with the fixed version once Apple approves the update
772348 "End user must grant permission ..." may not work correctly in macOS lock screen
- Fixed an issue with Mac Remote Control and end user permissions from the lock screen.
774037 Provisioning - add Apple macOS version 11.x Big Sur to the Ivanti Creator Config Package in Get macOS Installer
- The Ivanti Create Config Package.app can now download Big Sur Installers.
782170 IvantiAV unable to Load Libraries due to SIP
- A code signing issue with the Ivanti AV, that stopped it from properly loading and hence licensing the AV engine, has been resolved
783665 Mac M1 Not Showing Processor in EPM Inventory
- The EPM Mac agent components are now universal binaries, which allows to get information about CPU processor again.
784739 iOS MDM Enroller: User defaults and show/hide fixes
- If the user chooses to hide the CSA/core or group, launching the app clip workflow hides CSA/core or group.
792858 Big Sur OS Version Incorrect in Inventory
- Fixed a problem reporting the OS version, where all versions of macOS 11.x were reported as 11.0.0
793383 Inventory sync scans for devices managed by both the macOS Agent and by EPM MDM are not accepted by the core because they are out of sync
- Inventory scans initiated by the Mac EPM Agent no longer fail when the device is co-managed with MDM
795691 Cloud RC engine: File transfer and remote execute don't work on macOS
- File transfer from the Cloud RC viewer works as expected. Remote Execute, for manually entered paths and browsing the file hierarchy for executables, also works as expected.
796068 Updating agent version via MDM for Mac
- When the agent manifest package has an updated agent version, it is selected in the Agent Configuration for MDM enrollment dialog, and a Mobile Sync is run from the core with any mac enrolled in MDM, the agent version updates via MDM.
797861 Agent request timeout cannot be set to > 100s, which may be too low when doing vulscan or swdist through CSA
- The agent request timeout can now be set to values up to 1800 seconds, allowing for the larger latency when communicating through the CSA.
799544 iOS storage in inventory is not reporting the correct MB storage amount.
- iOS Inventory storage is displayed in GB or has three zeros to the amount displayed in MB.
800156 Bit Defender via CSA fails and does not retry if cert is not approved
- IvantiAV will try to install again when settings is called if the cert was not approved when it first tried to install.
802110 Tab order in Mac MDM Package dialog is incorrect, making it virtually impossible to tab through items when filling in data
- While setting up the "Mac Agent" MDM manifest package, you can now tab through the entries when filling them in.
802149 Mac AV reports versions different from Windows AV
- Mac IvantiAV reports versions in same locations as Windows IvantiAV.
804049 Ending the Remote Control WS session from the user side is "Problematic" with Mac
- Improved behavior when user terminates RC session from the remote machine by clicking on the red stop button. Viewer will no longer automatically reconnect.
804757 Reboot action in provisioning does not work in Big Sur
- When a reboot action is included in the macOS provisioning template, the macOS device with Big Sur installed will reboot.
812207 RC: screen indicator frame should let mouse clicks through
- During a Remote Control session, if you click on a menu locally on the controlled Mac by moving the mouse all the way up into the menubar area where the green frame is, the mouse click goes through the green frame and pulls down the menu.
815720 Patch Reboot/autofix issue
- Fixed an issue with automatic rebooting during auto fix
825525 IvantiAV does not work on M1 Macs
- Ivanti Antivirus now works on M1 Mac.
826500 Inconsistent "OS Name" of Agent vs. MDM in BigSur or newer
- "OS Name" (which is macOS) does not change depending on whether last inventory was by MDM or agent.
827095 EPM macOS Agent fails to connect to core due to App Transport Security issues
- App Transport Security issues with ldiscan and vulscan are now resolved.
828421 Importing a second APNS cert causes the cert to stop working
- Updating your APNs certificate with a new certificate will no longer stop APNs functionality.
828962 IVRemote listener does not restart on a network change
- ivremote re-connects to the tunnel when the network changes (VPN on/off, switch to/from WiFi, etc.) Remote Control through the tunnel works after turning off the VPN.
831584 APNS Push Commands Fail
- If there is more than one certificate in the ApplePushChannelStore, and the service may pick the wrong certificate which will result in the commands not being able to be pushed to the device, but just queued on the EPM Core Server. When the device reboots
838599 Apple MDM - Factory Reset PINs (macOS EraseDevice) are not exportable from the Client Data Storage
- PIN export following a macOS factory reset will now work.
838967 macOS RC will connect over the Tunnel once and then does not work again after that.
- macOS Remote Control will connect to the RC Tunnel every time it is off-network.
844617 Mac agent lost some local scheduler tasks after the upgrade to version 2021.1
- Macs will now always send full Inventory sync scans, send security scans, and synchronize policies when expected.
851843 AppStore IOS App deployment reinstall on every sync due to version info
- Syncing will no longer cause iOS apps to reinstall, since the version info will no longer occasionally mismatch
854300 macOS Monterey portal manager drop down menu for Launchpad/task history disappears when using it
- macOS Monterey portal manager drop down menu for Launchpad/task history does not disappear when using it.
857696 macOS 11.3 and 11.3.1 patches not detecting
- When machines show that a patch is needed when Apple Software Updates is ran, macOS 11.3 and 11.3.1 patches are now detecting properly.

MDM

677727 Co-management behavior for distributing MDM can be catastrophic
- Adjusted wording for the co-management/agent automatic deployment over MDM so it is clear that the agent install process will occur upon next MDM sync for devices without the agent. Before it was worded that the process only would occur upon MDM enrollment.
681366 iOS Configuration Profile Editor is not showing possible variables
- -
682821 In Android Enterprise mode, fully managed, possible to install apps with personal google account through public playstore
- Added a checkbox to Android Restrictions policy called "Remove play store apps that are installed from personal accounts". The default is checked, but to not remove user's apps, uncheck and user-installed apps will remain on the device.
684630 Users granted Modern Device Management rights unable to create/edit Mobility profiles
- -
707275 Android Enterprise MDM - Inventory information is inaccurate on serial numbers
- Implemented an "extension" app that retrieves the correct serial number from the android device and returns it to EPM to replace the incorrect serial number in the database and in the console.
707653 iOS restrictions are mis-labeled
- Allow FaceTime is now labeled as (Supervised only) in the configuration profile editor (CPE)
713039 WNS UI code incorrectly generates error if I enter a valid Package SID
- -
716474 Chromebooks fails to create inventory scans
- The HwLastScanDate was not included in delta scans which sometimes causes that field to become NULL in the database. That caused a failure in processing chromebooks and some would not get processed. Fixed by adding HwLastScanDate to delta scans and also s
722264 Allow apps in play store checkbox also affects work profile Android device
- -
725563 Configuration Profile for GMail / Office 365 failing with "Try reentering password"
- The domain portion of the user account is now being set correctly based on the forest information. This will allow gmail to properly line up the account information and prompt the user for a password and accept it if correct.When using outlook.office356.c
727074 Not all available VPP Apps Displayed When Creating a Distribution Package
- Added three retries for VPP request failed to get response in case of network failed.
734957 Preceding or Trailing Spaces in iOS Restrict App Usage Causes the Profile to Fail to Install.
- In addition to, stripping whitespace from restrictions, porting this to 2019.6 also updated 2019.6 with the new profiles added to 2020.1 Notes for port back to 2019.1.6 Core Module Added support for: com.apple.extensiblesso section Single Sign-On Extensions X509 Certificates Added support for Windows platform Added "(supervised only) " to Allow FaceTime Allow USB drive access in Files app (supervised only) [iOS 13.1+] Allow network drive access in Files app (supervised only) [iOS 13.1+] Force Wi-Fi power on (supervised devices only) [iOS 13+] Find My Friends (supervised only) [iOS 13+] Find My Devices (supervised only) [iOS 13+] Allow modifying Personal Hotspot settings (supervised devices only) [iOS 12.2+] Allow explicit sexual content in Apple Books Allow QuickPath typing [iOS 13+] Added "or enter ${LDAPUSER}$ to get it from the database " to "The CalDAV username " Added "or enter ${LDAPUSER}$ to get it from the database " to "The CardDAV username " OSX Module Added support for: com.apple.extensiblesso section Single Sign-On Extensions com.apple.associated-domains Use this section to configure apps to their associated domains com.apple.proxy.http.global Use this section to configure settings for the Global HTTP Proxy. These settings will only affect supervised devices. Preference Panes (Enable/Disable) Apple ID [macOS 10.15+] Classroom [macOS 10.14+] Family Sharing [macOS 10.15+] Screen Time [macOS 10.15+] Sidecar Allow screenshots and screen recording [macOS 10.15+] Allow AirPlay, View Screen by Classroom, and Screen Sharing [macOS 10.15+] Allow Classroom to perform AirPlay and View Screen without Prompting [macOS 10.15+] Allow Classroom to lock the device without prompting [macOS 10.15+] Automatically join Classroom classes without prompting [macOS 10.15+] Require teacher permission to leave Classroom unmanaged classes [macOS 10.15+] True Tone Display [macOS 10.12+] Screen Time [macOS 10.12+] Touch ID [macOS 10.12+] Automatically install macOS updates [macOS 10.15+] Automatically install app updates from the App Store [macOS 10.15+] Wake On Modem Ring Dynamic Power Step Destroy FileVault Key on Standby Disable Sleep Cache size labels; MB, GB, TB TVOS Added Support for: Force automatic date and time (supervised only) [tvOS 12.2+] Allow device sleep (supervised only) [tvOS 13+] Defer software updates for (0-90) day(s) (supervised devices only) [tvOS 12.2+]
750180 Not enough logging in the MDMManagementService.exe.log for APNS communication
- Extra logging has been added for APNS communication to help in diagnosing network issues.
780764 Application Restrictions not applying (Supervised Devices Only)
- Apple has updated some MDM settings, since iOS 13, to enforce the need for supervised devices.The Config Profile Editor now shows these configuration settings as only applying to supervised devices.
782761 Installing Rosetta 2 Agent
- Rosetta 2 is installed, as required, by the EPM Agent Installs
793827 Windows 10 Autopilot enrollment fails on 2004
- The large number of HTTP headers generated by Windows 10 version 2004 during enrollment resulted in the CSA rejecting the request. The maximum number of headers has been increased to a sufficiently large number to allow enrollment. To deploy the fix, the CSA 4.5 must be patched using a patch with this specific issue addressed and EPM must be updated to accept the larger number of headers from the CSA. Therefore, this requires either EPM 2021.1 or upcoming SUs for earlier versions of EPM.

Neurons

713311 Ivappmonsvc.exe High Memory on Ivanti Cloud Agents
- AppMon is utilizing high amounts of memory on computers with Ivanti Cloud Agent installed.

Patch Automation

724496 Patch Automation --- Emails do not work
- Sending emails feature for Patch Automation actions was optimized. Previously it would throw timeout errors in some scenarios.
772115 Patch Automation Date picker exception System.ArgumentOutOfRangeException: Year, Month, and Day parameters
- -
795994 Patch Automation service will not start if it cannot reach the database
- The patch automation service was not starting if it could not reach the database, now it will try to start silently until it manages to connect to the database.

Patch Manager

521986 LDReboot continues to prompt for reboot immediately after being snoozed
- Several logic and timing issues were corrected in LDReboot to make the snooze functionality more reliable.
606088 Unable to set up automatic definition download setting to move Office 365 definitions to custom filter during download
- Creating a filter now for Click to Run product found while searching for Office, will properly group up all the office definitions
632542 Agentless Vulnerability Scanner does not work with NextGen definitions
- Agentless Vulnerability Scanner missing files added.
649988 Severity Type column is incorrect at times, will show NA instead of correct severity
- Severity type for vulnerabilities should be more consistent now. Previously some vuldefs were incorrectly displaying NA for severity type.
660400 Repair fails when command line in vulscan specifies group
- When Vulscan is ran with a group specified to repair (example Command line: /showui /repair group=384) for a vulnerability definition in which there are standalone detection rules between workstation/server (ex MS20-01-W10-4534271_INTL) it should successf
670584 Impossible to change patch download location for MSO365 Patches
- The O365 download process will lookup both 32/64 registry locations now for the configured patch location path.
673282 Schedule time change on a repair task affects other tasks when performed from remote console.
- On a remote console that's in a different time zone from it's associated core, there will now be no issues with the start times of tasks changing unexpectedly.
674860 Download Updates window isn't scalable and is too tall for 1024x768 resolutions
- The Download Updates Window should fit properly now when displayed on 1024x768 resolutions
675400 New Patch Task Template now requires you to select repair group in 2019.1 SU3
- An unwanted behavior was added when creating a repair task. We fixed the requirement to select a group of vulnerabilities even if this wasn't supposed to be required.
719149 HII HP Drivers are not extacting- destination folder is empty after extraction
- HII Drivers- HP Drivers are extracted successfully.
722682 ldReboot.exe when the prompt is left open for extended periods it will use excess amounts of memory
- A memory leak caused by not releasing a service handler after use was corrected.
731451 User can see Machines out of his defined scope within Vuldefs history/status
- When opening the properties of a patch definition the user won't see agents out of his scope for history/status, respectively the scope of the user is now applied when displaying items
747101 Vulscan is identifying OS incorrectly for Virtual Desktop "Special Windows 10 Multi Session 1903" OS
- Fixed an issue where vulscan incorrectly identified the operating system for Windows 10 Multi Session run in Azure.
754007 Portal patch task is removed without the patch being installed
- Policy handling was updated to retain vulscan policies in Portal Manager until after they are executed, or indefinitely if they are configured to remain in the Portal.
766487 Patch Installed Dashboard does not display Critical patches
- Tweaked the "Patch Installed Dashboard" to make sure the Critical patches that were installed on the endpoints are properly counted.
769283 Filter does not work with Service Pack Published Severity
- Downloaded vulnerabilities are properly filtered now when the service pack is part of the configured filter.
829178 Patch Campaign not responsive
- After deleting a Patch Campaign template, Patch Automation commands for unavailable campaigns are marked as Failed in the database.
830973 Patch Campaigns stopped working after upgrade from 2020.1 SU3 to 2021.1
- Updated patch campaigns to be backwards compatible.
831533 Filter not working properly after editing the filter (removing selection)
- Now when existing content download filters are modified, the content will properly be assigned at download time based on the filter's rules.
846476 Download patch from Vendor over CSA issue
- Added check to validate if the URL will fetch a proper file, if the URL is bogus it will fall correctly back to download from the core instead of creating a dummy empty file with the name of the patch.
850677 Windows 10 Vulnerabilities are also applicable (detect/repair) for devices running windows 11
- Vulnerabilities can be detected and repaired for endpoints running Windows 11.

Provisioning

530173 Provisioning history menu not available for users having Provisioning read-only rights
- EPM users with only View OS Provisioning rights can now view a client's provisioning history via the right click menu in the network view.
642519 "Launch Template" action doesn't show Team Templates
- -
651927 Device name prompter pops up behind other windows in winPE provisioning
- In certain customer environments, the Device Name Prompter window would inadvertently appear behind other windows. We now always keep the Device Name Prompter on top of other windows.
656884 MBSDK Provisioning tasks created with CreateProvisioningTask failing immediately after start
- Fixed an issue where provisioning tasks created with the CreateProvisioningTask api fail immediately after being started.
678704 Multicast provisioning fails with image size roughly 200GB in size or larger
- Made enhancements to file multicast to better support large files such as those bigger than 200 GB.
690349 Provisioning action "Device Name Prompter" reports fails and reports an error: "The action handler output is invalid."
- The device name template lookup on the core was improved to allow the action to run from SWD Universal Provisioning tasks.
734978 PXE registry force key no longer works
- Updated the new selfelectcontroller use the ServiceName_WIN registry keys again so that a client self-electing service can be assigned to a new specific device.
738030 pxesvc.log reports "PxeParser: This is a Non-Secure PXE representative!"
- A log message that is no longer being used was removed.
836429 Provisioning template Options Remove client provisioning folder does not remove c:\ldprovisioning when the last Provisioning action is a Shutdown
- When using the shutdown action in Provisioning, the ldprovisioning directory is queued for deletion upon next boot.

Queries

770160 Edit scope query default dropdown blank
- The dropdown menu in the query editor dialog will now have a default value of "And".

RC Server

837624 During the Remote Control WS session a second virtual adapter "WLAN Adapter- LAN connection* 2" (Drahtlos-LAN-Adapter LAN-Verbindung* 2) is created and the connection gets lost.
- Fixed an issue that some VPN caused RC to stop when connected.

Remote Control

455713 HTML5 RC issue when using long password
- Fixed an issue that would prevent HTML5 RC authentication when trying to use a long password.
678285 RC Tunnel increased limits are not applied during CSA boot up
- Fixed an issue that could would cause the tunnel service on Linux not to open more than 2000 connections at any given time.
678287 Legacy RC tries to connect to the incorrect CSA when multiple CSAs are in the environment.
- Fixed an issue that caused legacy remote control not to choose the correct CSA if many CSA's were configured.
679971 Remote Control WS remote execute cmd/ps Fail to run other than local system
- Fixed an issue that prevented users from running a cmd.exe or powershell.exe remotely in a remote control session.
685206 Installation of enurcsetup.exe fails.
- Fixed an issue that was preventing the updated legacy remote control viewer from being updated in the SU patch.
692571 RCClient.exe remote control agent for CSA is failing - curllib.dll was not found
- Fixed an issue with standalone legacy rcclient.exe not installing correctly due to missing curllib.dll.
695671 LDWebApp pool to crash
- Fixed a remote control issue when multiple remote control tunnels were used. The root cause was a threading issue in the Ivanti RemoteControlAuth web service. The crash of RemoteControlAuth also caused the LDWebApp IIS pool to fail.
702449 AZERTY Keyboard Issue
- Mac RC now supports alternative keyboard language layouts, for example AZERTY keyboards.This can be especially important when typing passwords.
705536 Tunnel loses connectivity but does not unregister the device
- Fixed an issue that could cause the Remote control tunnel to stop monitoring connected devices in some situations. This would cause routers to potentially think the connection was inactive and kill the connection.
709336 RCviewer shows black screen due to displaying secondary monitor
- Fixed the WS remote control viewer to properly select the primary monitor when first starting a remote control session. Otherwise users could see a secondary monitor which may just be a black screen.
729711 RC WS mouse not moving issue
- Fixed an issue where the mouse could get stuck in the upper left part of the screen during a remote control session on some non-English versions of Windows.
736777 Addressed issue with RC communication
- -
743129 RCUser.exe could crash when ending the RC session in certain circumstances
- Fixed crash in remote control agent when ending a remote control session sometimes.
763585 Unable to RC devices with same hostname
- Fixed an issue where agents with the same name in the console could not be properly remote controlled.
770158 Unable to view C:\ drive in "remote execute" function of Remote control
- Fixed an issue that could cause the user of remote control not to be able to browse the remote hard disk when trying to use remote execute functionality.
770192 RCViewer doesn't send end session when stopping the session if initiated from the RC console
- Fixed an issue that would cause the Remote control session to appear to be connected after the session has been closed by the viewer if initiated from the RC console.
770999 Can't log into RC Console if the user imports the Landesk Secure Token Server certificate into the computer's trusted root store.
- -
773740 Garbled or Fuzzy screen when using RCViewer.exe
- -
787949 RC causing LDAppMain to crash due to bad CSA data
- CSA name will no longer allow '*' character.
793755 RC Viewer fails with user scope message in the logs
- Fix to restore a database connection when necessary.

Reporting

644413 Can not send report by email using SMTP port 587
- Sending a report via mail by using a SMTP with port 587 was not possible. Support was added and emails can be sent now through 587.
661872 "Export as csv" shows a wrong output when the query results are zero
- Export to CSV from a query fixed to write the proper results when a query returns no results.
709669 The additional variables that we offer for Alerting are not functioning
- Variables such as %infectionname%, %objectname% etc can properly be used now when creating an email body for an alert. example: an email body like this: Infection %infectionname% was successfully removed from %objectname% for an email alert configured to
743503 Health monitoring performance counters not displaying information.
- Health monitoring - performance counters are fixed to display information
744121 E-mail reports not working
- Fixed a scenario where the reports were not properly sent on email based on the configured smtp options.
745365 When configuring e-mail reporting, the reports are not being removed from: "LDMAIN\reports" after they are sent
- When configuring e-mail reporting, the reports are now removed from: "LDMAIN\reports" after they are sent.
747570 Remote Control reports are giving incorrect results
- Made updates to remote control reports so they report sessions that were missed previously.
764958 Reports - standard report, run report and try to export, the export window is missing OK and Cancel button on Chinese cores
- EPM2020.1 Chinese core: Report - export windows for standard report display now OK and Cancel buttons.
813703 Report Fails When Run as a CSV
- Added a fix for Reports as CSV.
818230 Getting "email send successful" notification even though invalid SMTP server in SMTP configuration for scheduled report is set
- If SMTP server in SMTP configuration is not responding or the connection can't be established the user will be correctly informed about this instead of always throwing a "successful" message.

Role Based Administration (RBA)

725548 Changes made under Teams are not visible in user configuration Users and groups
- Fixed an issue in the user management tool that could lead to the teams information not updating correctly in the UI.

Software Distribution

425992 New scheduled tasks show as Policy Supported Push in My Task View
- Fixed the method that was returning the task types by their string name to point to the right property.
608808 Open a Software Package is very slow. It takes up to 2 min to open a Package.
- For the case of opening a software distribution package, re-wrote the file location reducing code with a much faster algorithm. Also added a location cache for subsequent location accesses for either the primary package locations or the additional files locations. The location cache is automatically updated when new locations are added.
641220 Software Distribution edit permissions allows user to move packages/bundles from Public Packages to My Packages
- Fixed a permissions issue allowing a user with the Edit permission under Software distribution > Distribution packages allowed them to move packages/bundles from Public packages to My packages and make changes. Now they can only be copied, instead of mov
645162 Problem with detection logic for dependencies where only 32-bit registry is analyzed
- Reset root key for vulscan specified 64 bit syntax based on if architecture set to 64-bit or 'System architecture' and running on x64 platform.
650271 Package logo cannot be displayed in portal manager under workgroup environment without DNS
- At core side use core address in default connectivity settings to build image download URLs. At client side use core name that is from corresponding agent settings in registry for image download URLs.
658109 "Wake up devices" options is not preserved when creating a task based on a task template
- Fixed the Wake Up Devices checkbox to properly set the option when a new task is created.
662007 Problem when processing package bundles in which first bundle has a reboot action
- Fixed an issue to allow the first bundle in a Software Distribution package bundle to have a reboot action.
668178 Scheduled task template settings going back to default after Console restart
- When running swdCoreCustomAction to ensure that default settings exist, do not override saved user settings with default settings.
672039 LDAP resolution over the CSA may fail
- Enhancement made to ensure that the user is in trusted by machine domain.
673697 Windows Console / Agent settings - when Windows Regional settings are set to Dutch ( Netherlands ) time displayed in Maintenance Window settings within the Agent settings > Distribution and Patch is ambiguous
- The date format in the Start time and End time for maintenance windows will now display in the 24 hour format for core OS's with their region set to Dutch (Netherlands).
686674 Package Bundle shows completed in console, although installation stopped in the middle of processing.
- For Software Distribution, fixed issue ignoring pending reboot for MSI 3010 return code.
687545 Unable to download files with special characters "&" in the file name via http
- Software Distribution now properly decodes file names with the '&' character.
697088 Unable to uninstall MSI when using UNC share path
- Uninstall a MSI package by using its Product Code. If the MSI package does not has the Product Code, download and uninstall using the package.
701950 Download percentage skips from 0 to 100 in Portal Manager tasks
- A bug introduced in 2020.1 was fixed; the download percentage bar in the portal manager now works correctly.
702516 Users incorrectly able to create package Under "All Packages"
- An issue that allowed users to inadvertently create packages under "All packages " was corrected.
708178 Copied software distribution package does not have any information about detection option.
- When software distribution packages are copied in the console, their detection options will be copied correctly.
710531 "Additional Files" section is missing from the "Managed Scripts - Create file deployment script" window.
- Fixed an issue where the additional files window didn't show in the Managed scripts - New File Transfer Script dialog.
714408 Ldapwhoami may fail to correctly resolve user data causing clients to skip tasks
- Using UTF8 encoding instead of UTF16 on output transferring from ldapwhoami.exe to PolicySync.exe to better support foreign languages.
717033 The Windows 10 notification feature of EPM 2020.1 SU1 could cause data loss under a certain circumstance.
- Reboot notifications are now properly removed from the Windows Notification Center on reboot/shutdown, whether initiated from LDReboot or by other means.
721402 Patch and Distribution setting with do not disturb setting show installation failed message in case of restricting up is running
- If an application in the Do not disturb list in Distribution and Patch agent setting is running on a client while a task is deployed to it, the user will not see a dialog pop-up that says the task failed. Additionally, if a task is deployed outside of a maintenance window the user will not see a dialog pop-up with the failed status of the task.
742513 Diagnostics search still goes to old community site
- The Diagnostics tool was updated to send requests to the new community site, forums.ivanti.com. It also now utilizes the user's default browser when opening URLs.
743208 Package Description allows half the number of characters if dbcs is used
- U' sing string length instead of bytes for checking max package description length, since field in database is nvarchar.
747196 Azure Blob Exception - The TLS version of the connection is not permitted on this storage account.
- TLS 1.2 and 1.3 are now supported for both AZure Blob Storage and Amazon S3 Bucket Storage.
758642 Maintenance Windows do not work correctly for SWD in a specific situation
- Check if maintenance start time should be in yesterday.
772937 Custom actions have length limitations that is cumulative
- An issue with executing large Windows Action packages on the client was fixed.
779922 Windows 10 notifications may not work for non-admin users
- We now create the temporary toast configuration file in ProgramData\LANDesk\Temp, which should be accessible to all users.
791279 software distribution blocked even when Powerpoint window is maximized on endpoint: agent setting- do not disturb - full screen
- Removed app maximized check and only check if app running in full screen.
798589 Agent state sets computers to "failed" state instead of "pending" if inventory has a 0 status
- Set the state to pending for any device that is off according to agent state for all task types except push.
799554 Since upgrading to EPM 2019.1 SU6 some custom script based tasks are failing with "unable to find the agent"
- Correctly get MachineNode point from pong data in PDS2 ping callback. If osType is unknown, set by OS type using OS family and OS name in pong data.
804091 SchedPkgUpdate fails to hash large files hosted on AWS S3
- Previously, users were unable to create a distribution package with a large additional file from an Amazon S3 bucket. Now there should be no issue using very large additional files from S3.
806861 Pre-requisite queries doesn't work in the package bundles
- Fixed an issue where the allowed machines for a task were not being properly determined with prerequisite queries.
830006 Timezone Aware Targeting Does not Work
- Set device status to Active in case for start later schedule type when time come to start the task.
840664 Replication - vulscan.exe /replicate /settingsindex=0 remains running which causes the next scheduled Replication to fail immediately with Another instance of this file replication task is already running
- Modified code so that mutex would be guaranteed to be released even if there was an exception.
861151 Turn on windows authentication for HTTP package navigation, without setting up preferred server.
- For package browse from core or remote console, Use default credential first, If failed, then try cached credentials. If lockdown with Windows authentication on http:///landesk/files, need enable anonymous at landesk/files/ClientPolicies, landesk/f

User Management-RBA

830216 When deleting users in the Console, some other users lose their scope assignments
- Fixed the query that deleted the user from the ConsoleUserScope table. It was using the wrong column for the match on which user to delete.

Web Console

682823 Addressed potential issue around alert logging
- -
682836 Addressed potential issue for file uploads
- -

Win Console

636850 Inconsistent localization dates & US-format date/times in the Windows Console
- Below is a list of locations on the EPM Console where date formats would previously not be displayed in the format the core's geographic region was set to. With this fix, if the region on the OS is set to the EPM, Core's current region, then the date formats should be consistent with the way dates are formatted in that region. Note that having a core set to the language of a specific region will not trigger the dates to display in the localized format. The region has to be set on the operating system via Control Panel > Clock and Region > Region. Places in the console where the date format is fixed:1) Automatically generated scheduled task names will now contain a date in the localized format.2) At Toolbox >Distribution > Scheduled Tasks the graphs that appear when you click on the Scheduled tasks node and individual task nodes will now have time stamps in the localized format.3) At Toolbox > Security and Compliance > Patch and compliance all the graphs that appear when you click the Patch and Compliance node will now have time stamps in the localized format.4) At Toolbox > Reporting / Monitoring > Logs > Alert log the dates in the GMT Time and Local Time columns will now have dates in the localized format.5) At Network View > Queries > My queries > right click > New Query > Machine Components > Video > Driver Date the date that appears in the box to the right will now be in the localized format.
695658 Local Users and Groups right click option sometimes fails
- Updated the code to make sure the proper decryption was being used in all cases.
710419 Non-Administrator roles cannot export FileVault/BitLocker recovery keys
- A non-admin console user with Security rights and Disk Encryption Recovery rights can now access FileVault and BitLocker recovery keys
752586 Windows console crashing - Custom data forms
- Fixed console crash when adding multiple custom data forms.
772148 Console performance degrades if it displays dates that are not already localised.
- In the Network view, having columns with dates will not affect the performance of the console now. All the dates will still be displayed in the format consistent with the time zone set in the control panel.
779171 Device Name Column in All Devices goes missing when changing columnsets
- An issue was corrected where the Device Name column wasn't correctly loaded when modifying the columnset.
789076 SWD Tutorial link invalid
- The URL for the SWD Tutorial was corrected.

Known Issues

Files in this patch

_DiscDll.dll

718.23kB

11.0.3.2246

5/19/2021 11:07 AM

ActiveNotifyer.exe

67.68kB

11.0.3.2383

8/4/2021 7:00 PM

AdaptiveSettingsBehavior_Apply.dll

111.07kB

11.0.3.2415

9/17/2021 5:56 PM

AdvanceAgent.exe

169.98kB

11.0.3.2099

1/19/2021 12:38 PM

AgentConfig.exe

87.99kB

11.0.3.1283

7/29/2020 7:59 AM

AGLSManager.exe

1.43MB

11.0.3.2302

6/14/2021 4:27 PM

alert.exe

326.43kB

11.0.3.166

9/10/2021 3:49 PM

alert_x64.exe

392.53kB

11.0.3.166

9/10/2021 3:49 PM

AlertBiz.dll

174.16kB

11.0.3.2034

12/3/2020 8:38 AM

alertdetail.dll

89.56kB

11.0.3.1751

10/19/2020 9:03 PM

alertrender.exe

228.55kB

11.0.3.166

9/10/2021 3:49 PM

alertservice.exe

313.96kB

11.0.3.1794

10/30/2020 5:24 AM

AlertSettingsBehavior_Apply.dll

48.45kB

11.0.3.2236

5/11/2021 10:39 AM

AlertSync.exe

239.66kB

11.0.3.2281

6/8/2021 2:33 PM

AMHelper.exe

88.99kB

11.0.3.539

4/23/2020 6:31 AM

AMTConfig.Data.dll

176.77kB

11.0.3.1560

9/11/2020 2:35 PM

AMTProvMgr2.exe

2.30MB

11.0.3.1560

9/11/2020 2:35 PM

antivirus_log.xml

19.64kB

3/26/2021 6:37 AM

ApmService.dll

60.51kB

11.0.3.2426

10/4/2021 7:20 PM

ARViewer.exe

95.52kB

11.0.3.1947

11/20/2020 7:35 AM

Auditing.Schema.xml

15.48kB

6/5/2020 12:11 PM

AutoMapper.dll

281.00kB

10.0.0.0

7/1/2020 5:00 PM

AVBiz.dll

256.30kB

11.0.3.2439

10/13/2021 3:39 AM

AVEvtHdlr.exe

87.30kB

11.0.3.2185

3/26/2021 6:30 AM

AVStandaloneSetupHeader.exe

221.98kB

11.0.3.2415

9/17/2021 5:57 PM

AVUI.dll

3.09MB

11.0.3.2427

10/6/2021 4:05 AM

BrokerConfig.exe

1.46MB

11.0.3.2281

6/8/2021 2:33 PM

BrokerConfig.xml

2.74kB

6/7/2021 3:10 PM

BrokerConfig_x64.exe

1.82MB

11.0.3.2281

6/8/2021 2:33 PM

brokerservice.exe

2.19MB

11.0.3.2432

10/8/2021 10:54 AM

CaptureImageHandler.exe

409.80kB

11.0.3.1579

9/15/2020 1:21 PM

CaptureImageHandler_x64.exe

504.68kB

11.0.3.1579

9/15/2020 1:21 PM

cba8cleanup.exe

148.50kB

9/10/2021 3:49 PM

cba8inst.msi

6.64MB

9/10/2021 3:49 PM

CBA8Interface.dll

36.96kB

11.0.3.2034

12/3/2020 8:39 AM

CefSharp.BrowserSubprocess.Core.dll

1.23MB

90.6.70

6/2/2021 3:05 AM

CefSharp.BrowserSubprocess.exe

6.50kB

90.6.70.0

6/2/2021 3:05 AM

CefSharp.Core.dll

36.00kB

90.6.70.0

6/2/2021 3:05 AM

CefSharp.Core.Runtime.dll

1.87MB

90.6.70

6/2/2021 3:05 AM

CefSharp.Core.Runtime.xml

86.06kB

6/2/2021 3:05 AM

CefSharp.Core.xml

102.90kB

6/2/2021 3:05 AM

CefSharp.dll

1.04MB

90.6.70.0

6/2/2021 3:05 AM

CefSharp.WinForms.dll

34.50kB

90.6.70.0

6/2/2021 3:06 AM

CefSharp.WinForms.xml

55.63kB

6/2/2021 3:06 AM

CefSharp.Wpf.dll

98.50kB

90.6.70.0

6/7/2021 3:10 PM

CefSharp.xml

1.55MB

6/2/2021 3:05 AM

ChangeSettingsHandler.exe

438.91kB

11.0.3.2383

8/4/2021 7:00 PM

CheckCachedFiles.exe

66.18kB

11.0.3.2281

6/8/2021 2:33 PM

chrome_elf.dll

1.08MB

90.0.4430.212

5/27/2021 7:15 AM

ClientConfig.dll

2.29MB

11.0.3.2319

6/21/2021 11:28 AM

ClientConfigBehavior_Apply.dll

215.45kB

11.0.3.2415

9/17/2021 5:57 PM

ClientConfigLinux.xml

857.00 B

7/7/2020 2:18 PM

ClientConfigLinuxEmbedded.xml

397.00 B

7/7/2020 2:18 PM

ClientConnectivityBehavior_apply.dll

339.04kB

11.0.3.2415

9/17/2021 5:57 PM

ClientDataStoreUI.dll

85.32kB

11.0.3.2394

8/20/2021 12:21 PM

ClientPackager.dll

53.10kB

11.0.3.944

6/4/2020 2:04 PM

ClientRollingLog.dll

20.26kB

11.0.3.2296

6/11/2021 10:50 AM

collector.exe

400.63kB

11.0.3.2340

7/8/2021 6:12 AM

ComputerQuery.xml

13.16kB

10/13/2020 2:48 PM

Console.exe

64.54kB

11.0.3.2378

7/31/2021 6:14 PM

console_rptfiles.cab

954.32kB

10/12/2021 1:32 PM

core.secure.dll

92.71kB

11.0.3.2099

1/19/2021 12:38 PM

CoreProfiler.exe

30.96kB

11.0.3.1188

7/9/2020 5:35 PM

coresigner.dll

1.29MB

9/10/2021 3:49 PM

coresigner_x64.dll

1.57MB

9/10/2021 3:49 PM

CoreSyncService.exe

43.57kB

11.0.3.1393

8/18/2020 7:06 PM

CreateLANDeskRights.exe

28.46kB

11.0.3.1192

7/10/2020 6:16 AM

CreateTunnelArchive.exe

15.85kB

11.0.3.1215

7/15/2020 11:05 AM

curllib.dll

2.58MB

7.77.0

7/14/2021 12:26 PM

curllib_x64.dll

3.13MB

7.72.0

10/21/2020 9:00 AM

custjob.exe

2.82MB

11.0.3.2343

7/8/2021 7:56 PM

CustomDataForms.dll

2.70MB

11.0.3.1789

10/28/2020 3:44 PM

d3dcompiler_47.dll

4.14MB

10.0.17134.12 (WinBuild.160101.0800)

5/27/2021 4:01 AM

Datamart.xml

874.68kB

6/14/2021 7:55 PM

Datamart_DataProtect.xml

3.26kB

3/26/2020 4:08 PM

DatamartPM.xml

72.62kB

3/19/2021 1:44 AM

DBRollup.exe

2.13MB

11.0.3.2281

6/8/2021 2:33 PM

DeployImageHandler.exe

449.12kB

11.0.3.1579

9/15/2020 1:21 PM

DeployImageHandler_x64.exe

546.03kB

11.0.3.1579

9/15/2020 1:21 PM

DeviceNameHandler.exe

64.81kB

11.0.3.1304

7/31/2020 1:05 PM

DeviceNameHandler_x64.exe

64.81kB

11.0.3.1304

7/31/2020 1:04 PM

DistributionApi.dll

74.11kB

11.0.3.2118

1/28/2021 3:59 PM

enutools_top.xml

3.84kB

9/30/2020 1:15 AM

EPSUI.exe

677.49kB

11.0.3.2366

7/23/2021 2:51 AM

exec.dll

167.02kB

11.0.3.166

9/10/2021 3:49 PM

exec_x64.dll

204.41kB

11.0.3.166

9/10/2021 3:49 PM

execviewer2.dll

189.94kB

11.0.3.856

5/27/2020 6:51 PM

filexfer.dll

198.30kB

11.0.3.166

9/10/2021 3:49 PM

filexfer_x64.dll

237.70kB

11.0.3.166

9/10/2021 3:49 PM

fwregister.exe

145.48kB

11.0.3.978

6/8/2020 5:58 PM

gatewaybiz.dll

68.65kB

11.0.3.2278

6/7/2021 5:42 PM

gatewayui.dll

283.05kB

11.0.3.2278

6/7/2021 5:42 PM

GatherBitLocker.exe

24.30kB

11.0.3.2361

7/20/2021 4:56 PM

genkey.exe

1.30MB

11.0.3.166

9/10/2021 3:49 PM

GetBases.exe

75.75kB

11.0.3.2415

9/17/2021 5:56 PM

Google.Apis.Admin.Directory.directory_v1.dll

209.38kB

1.40.2.1505

11/1/2021 9:38 PM

Google.Apis.AndroidEnterprise.v1.dll

142.81kB

1.45.0.1910

11/1/2021 9:38 PM

Google.Apis.AndroidManagement.v1.dll

117.60kB

1.40.2.1630

11/1/2021 9:38 PM

Google.Apis.Auth.dll

130.71kB

1.45.0.0

11/1/2021 9:38 PM

Google.Apis.Core.dll

80.29kB

1.45.0.0

11/1/2021 9:38 PM

Google.Apis.Discovery.v1.dll

37.90kB

1.40.2.0

11/1/2021 9:38 PM

Google.Apis.dll

85.82kB

1.45.0.0

11/1/2021 9:38 PM

GoogleAndroidApiLib.dll

32.03kB

11.0.3.1427

8/25/2020 10:29 AM

GoogleAppsApiLib.dll

41.60kB

11.0.3.1427

8/25/2020 10:29 AM

httpclient.exe

1.72MB

11.0.3.166

9/10/2021 3:49 PM

httpclient_x64.exe

2.15MB

11.0.3.166

9/10/2021 3:49 PM

httprequest.dll

1.72MB

11.0.3.2281

6/8/2021 2:33 PM

idal.dll

542.84kB

11.0.3.2191

4/5/2021 2:57 PM

IdentityServerEpmBackendConfig.dll

24.96kB

11.0.3.1919

11/18/2020 1:01 PM

Inspector.Business.dll

179.27kB

11.0.3.1728

10/13/2020 2:42 PM

Inspector.WinUI.dll

323.03kB

11.0.3.1728

10/13/2020 2:42 PM

Installer.exe

36.03kB

11.0.3.1653

10/1/2020 7:14 AM

installer.xml

1.37kB

1/20/2021 3:27 AM

installkey.exe

162.99kB

11.0.3.166

9/10/2021 3:49 PM

interop.idallib.dll

27.77kB

10.1.0.0

4/5/2021 2:56 PM

InventorySettingsBehavior_Apply.dll

253.84kB

11.0.3.2415

9/17/2021 5:57 PM

IpmiRedirectionService.exe

234.29kB

11.0.3.603

4/29/2020 3:12 PM

isscert.dll

1.84MB

11.0.3.2404

9/10/2021 3:42 PM

issproxy.exe

1.82MB

11.0.3.2404

9/10/2021 3:41 PM

isssec.dll

1.78MB

11.0.3.2281

6/8/2021 2:33 PM

issuser.exe

4.24MB

11.0.3.2422

9/23/2021 3:40 PM

issview.dll

772.47kB

11.0.3.856

5/27/2020 6:50 PM

Ivanti.ManagementSuite.CrowdStrikeConnector.dll

27.77kB

11.0.3.2172

3/19/2021 1:36 AM

Ivanti.ManagementSuite.Onboarding.Controls.dll

216.98kB

11.0.3.2291

6/10/2021 12:29 PM

Ivanti.ManagementSuite.Onboarding.Controls.Interfaces.dll

24.96kB

11.0.3.1909

11/18/2020 6:33 AM

Ivanti.ManagementSuite.Onboarding.Engines.dll

35.53kB

11.0.3.1916

11/18/2020 10:40 AM

Ivanti.ManagementSuite.Onboarding.Engines.Interfaces.dll

18.89kB

11.0.3.1909

11/18/2020 6:34 AM

Ivanti.ManagementSuite.Onboarding.Shared.dll

19.92kB

11.0.3.1838

11/10/2020 10:17 AM

Ivanti.ManagementSuite.Onboarding.ViewModels.dll

30.00kB

11.0.3.1850

11/12/2020 2:34 AM

Ivanti.ManagementSuite.Onboarding.ViewModels.Interfaces.dll

20.93kB

11.0.3.1850

11/12/2020 2:34 AM

Ivanti.ManagementSuite.PatchAutomation.CommandRunner.dll

26.30kB

11.0.3.2444

10/14/2021 9:18 AM

Ivanti.ManagementSuite.PatchAutomation.Common.dll

90.36kB

11.0.3.2367

7/23/2021 10:31 AM

Ivanti.ManagementSuite.PatchAutomation.DispatcherService.exe

17.72kB

11.0.3.2444

10/14/2021 9:18 AM

Ivanti.ManagementSuite.PatchAutomation.Domain.dll

39.57kB

11.0.3.1631

9/29/2020 12:23 PM

Ivanti.ManagementSuite.PatchAutomation.Domain.Interfaces.dll

28.50kB

11.0.3.1631

9/29/2020 12:23 PM

Ivanti.ManagementSuite.PatchAutomation.Infrastructure.dll

44.97kB

11.0.3.2444

10/14/2021 9:19 AM

Ivanti.ManagementSuite.PatchAutomation.Presentation.dll

1.18MB

11.0.3.2461

10/21/2021 11:55 AM

Ivanti.ManagementSuite.PatchAutomation.Services.dll

170.56kB

11.0.3.2444

10/14/2021 9:19 AM

Ivanti.ManagementSuite.Telemetry.dll

32.03kB

11.0.3.1691

10/7/2020 7:10 AM

IvantiCefDLL.dll

68.68kB

11.0.3.2264

6/3/2021 2:56 PM

IvantiNotificationsManagerSetup.msi

176.00kB

10/27/2021 1:27 PM

KVMLib.dll

855.30kB

7.0.0.80021

7/2/2020 12:57 PM

LANDesk.AgentConfig.ConfigWriter.dll

45.10kB

11.0.3.1391

8/18/2020 2:38 PM

LANDesk.AlertManager.Business.dll

117.66kB

11.0.3.1794

10/30/2020 5:25 AM

LANDesk.AlertManager.Data.dll

85.38kB

11.0.3.2034

12/3/2020 8:38 AM

LANDesk.Crypto.dll

1.52MB

11.0.3.2278

6/7/2021 5:42 PM

LANDesk.DataServices.Database.dll

52.71kB

11.0.3.971

6/8/2020 3:22 AM

LANDesk.DataServices.dll

103.13kB

11.0.3.1017

6/11/2020 11:28 AM

LANDesk.DataServices.Upgrade.dll

76.66kB

11.0.3.2236

5/11/2021 10:39 AM

LANDesk.DirMan.Interface.dll

21.42kB

11.0.3.1672

10/2/2020 1:29 PM

LANDesk.DirMan.UI.dll

143.85kB

11.0.3.2363

7/22/2021 2:08 AM

LANDesk.DrManAPI.dll

36.53kB

11.0.3.1672

10/2/2020 1:31 PM

LANDesk.Gateway.Agent.dll

22.93kB

11.0.3.1003

6/10/2020 4:04 PM

LANDESK.LDCrypto.Facade.dll

36.07kB

11.0.3.505

4/8/2020 7:55 PM

LANDesk.ManagementSuite.Authentication.dll

176.04kB

11.0.3.2214

4/12/2021 4:36 PM

LANDesk.ManagementSuite.ClientConfigUI.dll

480.83kB

11.0.3.1155

7/2/2020 11:09 AM

LANDesk.ManagementSuite.CloudStorageBiz.dll

18.35kB

11.0.3.1181

7/8/2020 4:48 AM

LANDesk.ManagementSuite.CloudStorageUI.dll

74.35kB

11.0.3.478

3/24/2020 6:14 PM

LANDesk.ManagementSuite.Core.Anonymous.dll

53.10kB

11.0.3.740

5/14/2020 8:16 PM

LANDesk.Managementsuite.CredentialManagerUI.dll

151.05kB

11.0.3.1798

10/30/2020 1:01 PM

LANDesk.ManagementSuite.Data.dll

1.23MB

11.0.3.2460

10/20/2021 4:05 PM

LANDesk.ManagementSuite.Database.dll

161.38kB

11.0.3.2303

6/14/2021 7:47 PM

LANDesk.ManagementSuite.Diagnostics.dll

117.00kB

11.0.3.2296

6/11/2021 10:50 AM

LANDESK.ManagementSuite.GoogleAndroidClassLibrary.dll

23.42kB

11.0.3.1429

8/25/2020 2:17 PM

LANDesk.ManagementSuite.Information.dll

327.49kB

11.0.3.767

5/18/2020 11:42 AM

LANDesk.ManagementSuite.Licensing.Activation.dll

112.96kB

11.0.3.2400

8/27/2021 4:30 PM

LANDesk.ManagementSuite.Licensing.UsageService.exe

137.84kB

11.0.3.1188

7/9/2020 5:36 PM

LANDesk.ManagementSuite.Logs.dll

50.67kB

11.0.3.2002

11/29/2020 6:56 PM

LANDesk.ManagementSuite.Queries.dll

45.03kB

11.0.3.962

6/5/2020 3:07 PM

LANDesk.ManagementSuite.Reporting.dll

2.31MB

11.0.3.924

6/3/2020 4:02 PM

LANDesk.ManagementSuite.RESTful.Resources.dll

102.13kB

11.0.3.2045

12/3/2020 1:47 PM

LANDesk.ManagementSuite.RESTful.Service.dll

273.07kB

11.0.3.2045

12/3/2020 1:48 PM

LANDesk.ManagementSuite.SelfElectionBiz.dll

66.31kB

11.0.3.503

4/6/2020 3:04 PM

LANDesk.ManagementSuite.SmtpEmail.dll

24.18kB

11.0.3.2252

5/28/2021 11:57 AM

LANDesk.ManagementSuite.SoftwareDistribution.Business.dll

899.82kB

11.0.3.2462

10/21/2021 8:22 PM

LANDesk.ManagementSuite.SoftwareDistribution.Win32.dll

262.41kB

11.0.3.2411

9/15/2021 5:27 PM

LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll

3.24MB

11.0.3.2397

8/24/2021 3:57 PM

LANDesk.ManagementSuite.ToolsXml.dll

28.89kB

11.0.3.1056

6/15/2020 1:14 PM

LANDesk.ManagementSuite.WinConsole.dll

6.77MB

11.0.3.2418

9/21/2021 10:52 AM

LANdesk.ManagementSuite.WinConsole.Help.dll

61.17kB

11.0.3.1093

6/18/2020 12:25 AM

LANDesk.Provisioning.Business.dll

743.12kB

11.0.3.1812

11/4/2020 5:35 PM

LANDesk.Provisioning.WinUI.dll

3.14MB

11.0.3.2086

1/4/2021 2:04 PM

LANDesk.Query.Business.dll

72.55kB

11.0.3.2236

5/11/2021 10:40 AM

LANDesk.ReportingServices.DataDynamicsReports.dll

386.92kB

11.0.3.2444

10/14/2021 9:19 AM

LANDesk.ReportingServices.Publisher.dll

28.22kB

11.0.3.2097

1/18/2021 8:20 AM

LANDesk.Scheduler.TaskHandler.dll

347.84kB

11.0.3.753

5/15/2020 2:33 PM

LANDesk.ServerInfo.UI.dll

318.70kB

11.0.3.2196

4/7/2021 9:10 AM

LANDesk.ServerManager.Business.dll

149.95kB

11.0.3.1699

10/8/2020 3:42 AM

LANDesk.ServerManager.RemoteControl.UI.dll

65.21kB

11.0.3.1802

11/1/2020 9:43 PM

LANDesk.ServerManager.UI.dll

133.14kB

11.0.3.2466

10/22/2021 7:01 PM

LANDesk.Shared.RAXfer.dll

32.26kB

11.0.3.166

9/10/2021 3:49 PM

LANDesk.WebConsole.ClientComm.dll

81.35kB

11.0.3.1408

8/21/2020 10:22 AM

LaunchLdprovisionAsUser.exe

178.59kB

11.0.3.2383

8/4/2021 7:00 PM

LaunchLdprovisionAsUser_x64.exe

68.72kB

11.0.3.2383

8/4/2021 7:00 PM

LaunchPad.Link.WebUI.Business.dll

21.89kB

11.0.3.532

4/22/2020 7:02 PM

LaunchPad.Link.WebUI.dll

61.17kB

11.0.3.532

4/22/2020 7:02 PM

LaunchProcessAsUser.exe

176.09kB

11.0.3.2383

8/4/2021 6:59 PM

Lclxclnt.dll

1.30MB

11.0.3.1132

6/26/2020 5:07 PM

ldaccount.dll

2.00MB

11.0.3.1670

10/2/2020 11:58 AM

ldalert.exe

348.27kB

11.0.3.1751

10/19/2020 9:05 PM

ldapinfo.dll

275.51kB

11.0.3.2426

10/4/2021 7:19 PM

ldapwhoami.exe

192.68kB

11.0.3.2154

3/1/2021 12:01 PM

LDAVBD.dll

455.05kB

11.0.3.2427

10/6/2021 4:06 AM

LDAVBD64.dll

501.95kB

11.0.3.2427

10/6/2021 4:05 AM

ldavhlpr.dll

1.04MB

11.0.3.2431

10/8/2021 3:02 AM

LDAVKES.dll

1.06MB

11.0.3.2415

9/17/2021 5:57 PM

ldcache.dll

1.04MB

11.0.3.879

5/29/2020 4:09 PM

lddwnld.dll

1.15MB

11.0.3.2464

10/22/2021 1:12 PM

lddwnld_x64.dll

1.50MB

11.0.3.2464

10/22/2021 1:12 PM

lddwnldClassLib.dll

123.17kB

11.0.3.2464

10/22/2021 1:12 PM

ldheader.exe

161.95kB

11.0.3.2411

9/15/2021 5:27 PM

ldheaderRC.exe

161.95kB

11.0.3.2411

9/15/2021 5:27 PM

LDInv32.exe

7.28MB

11.0.3.1177

7/7/2020 12:17 PM

ldiscn32.exe

3.42MB

11.0.3.2474

11/1/2021 9:38 PM

ldiscnupdate.exe

1.74MB

11.0.3.1006

6/10/2020 6:26 PM

ldlocalprt.exe

388.20kB

11.0.3.603

4/29/2020 3:13 PM

LDlogs.exe

379.37kB

11.0.3.2195

4/7/2021 8:23 AM

LDMBBApi.dll

47.93kB

11.0.3.2140

2/19/2021 3:59 PM

LDMof.exe

182.37kB

11.0.3.1521

9/7/2020 4:38 AM

ldpgp.exe

1.41MB

11.0.3.166

9/10/2021 3:49 PM

ldping.dll

147.38kB

11.0.3.166

9/10/2021 3:49 PM

ldping_x64.dll

179.73kB

11.0.3.166

9/10/2021 3:49 PM

LDProfile.exe

653.81kB

11.0.3.2411

9/15/2021 5:27 PM

ldProvision.exe

674.45kB

11.0.3.2383

8/4/2021 7:00 PM

ldProvision_x64.exe

818.76kB

11.0.3.2383

8/4/2021 7:00 PM

ldReboot.exe

3.58MB

11.0.3.2415

9/17/2021 5:56 PM

ldredirect.dll

93.56kB

11.0.3.590

4/28/2020 6:50 PM

LDSecSvc.exe

2.37MB

11.0.3.2366

7/23/2021 2:51 AM

LDSecSvc64.exe

3.00MB

11.0.3.2366

7/23/2021 2:51 AM

LDServerRoles.exe

19.89kB

11.0.3.758

5/15/2020 7:23 PM

libcef.dll

146.02MB

90.6.7+g19ba721+chromium-90.0.4430.212

5/27/2021 8:50 AM

libeay32.dll

1.15MB

1.0.2u

9/11/2020 2:41 PM

libEGL.dll

397.50kB

2.1.15048 git hash: ed5f62c36dc0

5/27/2021 7:08 AM

libGLESv2.dll

6.48MB

2.1.15048 git hash: ed5f62c36dc0

5/27/2021 7:08 AM

libhttp_x64.dll

1.67MB

11.0.3.166

9/10/2021 3:49 PM

LicensingServiceProvider.exe

30.30kB

11.0.3.2400

8/27/2021 4:31 PM

localAccount.exe

1.78MB

11.0.3.1670

10/2/2020 11:57 AM

LocalPrtInfo.exe

1.77MB

11.0.3.603

4/29/2020 3:13 PM

LocalRequest.dll

215.95kB

11.0.3.2383

8/4/2021 7:00 PM

LsmSnmpSrv.exe

262.57kB

11.0.3.1751

10/19/2020 9:04 PM

ltapi.dll

243.86kB

11.0.3.2062

12/8/2020 7:09 PM

MAKECAB.dll

2.46MB

11.0.3.2411

9/15/2021 5:28 PM

MBBScanner.exe

26.24kB

11.0.3.2148

2/25/2021 5:25 PM

MBSDKService.dll

158.02kB

11.0.3.1781

10/27/2020 11:43 AM

Microsoft.IdentityModel.JsonWebTokens.dll

62.85kB

6.5.1.10424

4/25/2020 12:30 AM

Microsoft.IdentityModel.Logging.dll

24.35kB

6.5.1.10424

4/25/2020 12:31 AM

Microsoft.IdentityModel.Tokens.dll

838.37kB

6.5.1.10424

4/25/2020 12:34 AM

Mobile.Diagnostics.dll

36.30kB

11.0.3.2296

6/11/2021 10:50 AM

Mobile.WcfService.dll

51.71kB

11.0.3.1076

6/16/2020 4:54 PM

Mobile.WinUI.dll

475.90kB

11.0.3.1001

6/10/2020 12:10 PM

MoveAltCredentials.exe

61.31kB

11.0.3.487

3/27/2020 7:32 PM

Newtonsoft.Json.dll

508.00kB

7.0.1.18622

6/12/2020 5:25 PM

Ninject.dll

135.50kB

3.3.4.0

11/13/2017 3:01 AM

ntremoteexec.exe

159.95kB

11.0.3.166

9/10/2021 3:49 PM

Office365Util.dll

110.03kB

11.0.3.2283

6/8/2021 6:21 PM

openssl.exe

433.00kB

9/11/2020 2:41 PM

OtherSecurityBehavior_apply.dll

224.02kB

11.0.3.2415

9/17/2021 5:56 PM

package.data.dll

129.05kB

11.0.3.2215

4/13/2021 11:26 PM

PackageQuery.xml

3.86kB

10/13/2020 2:48 PM

PanelManager.dll

399.46kB

11.0.3.2319

6/21/2021 11:29 AM

PatchApi.dll

40.60kB

11.0.3.490

3/30/2020 12:52 PM

PatchBiz.dll

1.66MB

11.0.3.2415

9/17/2021 5:57 PM

PatchManagement.dll

14.44MB

11.0.3.2447

10/15/2021 3:31 AM

pds2dis.dll

350.14kB

11.0.3.166

9/10/2021 3:49 PM

pds2dis.exe

116.07kB

11.0.3.166

9/10/2021 3:49 PM

pds2dis_x64.dll

458.59kB

11.0.3.166

9/10/2021 3:49 PM

pds2info.dll

345.11kB

11.0.3.166

9/10/2021 3:49 PM

pds2info_x64.dll

458.13kB

11.0.3.166

9/10/2021 3:49 PM

pds2lis.dll

324.93kB

11.0.3.166

9/10/2021 3:49 PM

pds2lis_x64.dll

430.88kB

11.0.3.166

9/10/2021 3:49 PM

PDS2Reg.dll

314.83kB

11.0.3.166

9/10/2021 3:49 PM

pds2reg_x64.dll

419.31kB

11.0.3.166

9/10/2021 3:49 PM

pedownloader.exe

443.16kB

11.0.3.986

6/9/2020 1:21 PM

PendingReboot.xml

764.00 B

8/31/2020 4:58 PM

PendingRebootPreview.xml

553.00 B

9/16/2020 6:53 PM

PlatformSettingsBehavior_Apply.dll

276.01kB

11.0.3.2415

9/17/2021 5:56 PM

PolicyData.dll

74.72kB

11.0.3.2460

10/20/2021 4:05 PM

PolicySync.exe

94.32kB

11.0.3.2126

2/2/2021 5:34 PM

PolicyTaskHandler.exe

41.07kB

11.0.3.1106

6/19/2020 7:52 PM

PortalManagerBehavior_apply.dll

210.91kB

11.0.3.2415

9/17/2021 5:56 PM

postcgi.exe

21.80kB

9/10/2021 3:49 PM

processrunner.dll

142.48kB

11.0.3.972

6/8/2020 10:50 AM

prov_loaddb.exe

24.85kB

11.0.3.1449

8/27/2020 6:08 PM

provclient.dll

275.51kB

11.0.3.2281

6/8/2021 2:34 PM

ProvisionHandlerLibrary.dll

19.76kB

11.0.3.2390

8/10/2021 6:57 PM

ProvisioningMaintenance.exe

22.92kB

11.0.3.514

4/21/2020 6:53 PM

ProvisioningWebService.dll

45.03kB

11.0.3.1840

11/10/2020 4:39 PM

provNTEventLog.dll

172.77kB

11.0.3.1661

10/2/2020 1:22 AM

proxyext.dll

135.78kB

11.0.3.166

9/10/2021 3:49 PM

proxyext_x64.dll

168.09kB

11.0.3.166

9/10/2021 3:49 PM

proxyhost.exe

1.97MB

11.0.3.166

9/10/2021 3:49 PM

proxyhost_x64.exe

2.37MB

11.0.3.166

9/10/2021 3:49 PM

purgefile.exe

175.59kB

11.0.3.2246

5/19/2021 11:06 AM

PWMBehavior_Apply.dll

286.62kB

11.0.3.2415

9/17/2021 5:56 PM

PxeParser.dll

3.19MB

2.0.084

10/8/2020 12:23 PM

PXESvc.exe

3.36MB

11.0.3.2281

6/8/2021 2:33 PM

rainstall.exe

338.50kB

11.0.3.166

9/10/2021 3:49 PM

RAXfer.dll

1.91MB

11.0.3.166

9/10/2021 3:49 PM

raxfer_x64.dll

2.38MB

11.0.3.166

9/10/2021 3:49 PM

RCBehavior_apply.dll

175.63kB

11.0.3.2415

9/17/2021 5:56 PM

RCBehaviorBiz.dll

44.60kB

11.0.3.1439

8/26/2020 4:59 PM

RCBehaviorUI.dll

200.98kB

11.0.3.1758

10/21/2020 11:47 AM

rckvm.exe

331.97kB

1.4.0.8

9/23/2021 3:41 PM

rckvm_x64.exe

445.48kB

1.4.0.8

9/23/2021 3:41 PM

RCService.exe

2.48MB

11.0.3.2422

9/23/2021 3:41 PM

RCService64.exe

3.15MB

11.0.3.2422

9/23/2021 3:41 PM

rcuser.exe

2.17MB

11.0.3.1730

10/14/2020 3:20 PM

RCViewer.exe

58.97MB

1.23.4.732043

6/3/2021 3:35 PM

Regwall.xml

16.82kB

3/26/2021 4:32 AM

remotecontrol.dll

49.07kB

11.0.3.530

4/22/2020 3:47 PM

RemoteControl.xml

616.00 B

8/31/2020 4:58 PM

RemoteControlPreview.xml

510.00 B

8/31/2020 4:58 PM

residentagent.exe

211.41kB

11.0.3.166

9/10/2021 3:49 PM

residentAgent_x64.exe

254.30kB

11.0.3.166

9/10/2021 3:49 PM

restartmon.exe

130.38kB

11.0.3.1283

7/29/2020 7:58 AM

RollingLog.dll

136.02kB

11.0.3.1402

8/20/2020 2:40 PM

RollingLog_x64.dll

171.27kB

11.0.3.1402

8/20/2020 2:40 PM

rollupcore_rptfiles.cab

915.60kB

10/12/2021 1:32 PM

rptfiles.cab

979.29kB

10/12/2021 1:32 PM

runasuserlibrary.dll

225.22kB

11.0.3.972

6/8/2020 10:50 AM

SchedQry.exe

36.30kB

11.0.3.2377

7/30/2021 3:21 PM

ScheduledTask.xml

5.23kB

10/13/2020 2:48 PM

SchedulerSettingsBehavior_Apply.dll

183.70kB

11.0.3.2415

9/17/2021 5:56 PM

sdclient.exe

87.49kB

11.0.3.1337

8/7/2020 4:45 PM

SDClientHandler.exe

397.23kB

11.0.3.1812

11/4/2020 5:36 PM

SDClientHandler_x64.exe

463.83kB

11.0.3.1812

11/4/2020 5:36 PM

sdclientlib.dll

914.03kB

11.0.3.2420

9/22/2021 12:50 PM

sdistps1.exe

326.40kB

11.0.3.2388

8/9/2021 3:34 PM

sdistscript.exe

283.05kB

11.0.3.2383

8/4/2021 7:00 PM

SelfElectController.exe

1.91MB

11.0.3.2424

9/29/2021 6:55 PM

sendemail.exe

2.14MB

11.0.3.2236

5/11/2021 10:38 AM

sendsnmp.exe

279.21kB

11.0.3.1751

10/19/2020 9:04 PM

SendSyslog.exe

33.77kB

11.0.3.2194

4/7/2021 6:34 AM

ServerAuthentication.dll

48.40kB

11.0.3.2281

6/8/2021 2:33 PM

ServerScanner.exe

308.29kB

11.0.3.2383

8/4/2021 6:59 PM

servicehost.exe

1.81MB

11.0.3.166

9/10/2021 3:49 PM

servicehost_x64.exe

2.25MB

11.0.3.166

9/10/2021 3:49 PM

setup.exe

5.13MB

11.0.2.1

11/1/2021 10:22 PM

ShouldUseWindowsNotifications.xml

122.00 B

8/20/2020 1:45 PM

softmon.exe

779.37kB

11.0.3.2415

9/17/2021 5:56 PM

ssleay32.dll

267.00kB

1.0.2u

9/11/2020 2:41 PM

svccfg.exe

726.55kB

11.0.3.653

5/6/2020 6:24 PM

SWD.Package.Macintosh.xml

2.46kB

6/21/2021 10:33 AM

SWD.Package.WinMetro.xml

3.53kB

11/12/2020 6:25 PM

swdCoreCustomAction.exe

101.52kB

11.0.3.1659

10/1/2020 7:46 PM

SWDDeferral.xml

369.00 B

9/1/2020 5:18 PM

SWDDeferralPreview.xml

485.00 B

8/31/2020 4:58 PM

SWDResult.xml

304.00 B

9/18/2020 6:04 PM

System.IdentityModel.Tokens.Jwt.dll

81.87kB

6.5.1.10424

4/25/2020 12:28 AM

Terminate.exe

189.41kB

11.0.3.2024

12/2/2020 1:55 PM

tmcdll.dll

1.13MB

11.0.3.1602

9/18/2020 3:55 PM

tmcsrvr.dll

131.78kB

11.0.3.2335

7/2/2021 11:40 AM

tmcsvc.exe

359.84kB

11.0.3.1402

8/20/2020 2:39 PM

Trout.exe

30.50kB

11.0.3.576

4/27/2020 6:19 PM

tunnel.exe

2.49MB

1.4.0.8

11/1/2021 9:38 PM

TunnelManagerTest.exe

28.80kB

11.0.3.2252

5/28/2021 11:57 AM

UninstallWinClient.exe

299.63kB

11.0.3.2182

3/25/2021 5:56 PM

UserManagement.Business.dll

216.45kB

11.0.3.2387

8/9/2021 12:55 PM

UserManagement.Common.dll

54.21kB

11.0.3.1414

8/21/2020 4:27 PM

VariablesBehavior_Apply.dll

44.51kB

11.0.3.2415

9/17/2021 5:56 PM

vulscan.dll

6.95MB

11.0.3.2448

10/15/2021 7:07 AM

WindowsMDMConfigurationBehavior_Apply.dll

44.51kB

11.0.3.2415

9/17/2021 5:56 PM

wscfg32.exe

575.61kB

11.0.3.2415

9/17/2021 5:57 PM

WSVulnerabilityCore.dll

80.68kB

11.0.3.2431

10/8/2021 3:04 AM

.Loading..Loading.

Service Updates

Installation Instructions

Installing on the Core and Rollup Core

Steps

Installing on Remote Consoles

Steps

Updating the Agent

Methods of agent deployment

Manual installation of the client patch

Updating the Agent With Patch Manager

Release Information

Feature Changes and Updates

Alerting

AntiVirus

Client Notifications

Endpoint Security

Inventory

Linux

Mac

MDM

Patch Automation

Patch Manager

Provisioning

Remote Control

RTI-Monitoring

Software Distribution

Web Console

Win Console

Defects Fixed

Agent

Alerting

AMT\vPro

AntiVirus

API\SDK

AV

Cloud Services Appliance

Core Sync

CSEP

Data Analytics

Device Discovery (UDD / XDD)

Endpoint Security

EPS

Inventory

Licensing

Linux

Mac

MDM

Neurons

Patch Automation

Patch Manager

Provisioning

Queries

RC Server

Remote Control

Reporting

Role Based Administration (RBA)

Software Distribution

User Management-RBA

Web Console

Win Console

Known Issues

Files in this patch