.Loading..Loading.

Readme Rev

Service Updates

When the downloaded patch is run, it will extract to a folder and there will be zip files. Those files should be extracted and then Setup.exe can be run. This table outlines the names of the zip files and where they should be run.

ComponentCore/ConsoleClient

The following outlines instructions for installing this update.

This patch requires that Ivanti Endpoint Manager 2020.1 be installed. For more information about current service packs please see Ivanti Community Doc 1001

Installing on the Core and Rollup Core

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Prior to installing a patch on the Core Server it is recommended to make a backup of the Ivanti database.

Steps
  1. Disable any services on other machines that interact with the Core Server
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the Core patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required
  6. After applying the patch, you may need to re-activate your Core Server using the Core Server Activation Utility
  7. Restart any services stopped in Step 1

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Installing on Remote Consoles

A Remote Console is any machine that is not the Core Server and has the Ivanti Endpoint Manager Console installed. Console Machines need to be updated to be able to connect to the updated Core Server and Database.

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Steps
  1. Close the Console
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the appropriate patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Updating the Agent

The patch should be installed on the Core Server before updating Agents

Use one of the following methods to re-deploy the agent once the patch has been applied to the Core or to apply the patch manually.

Methods of agent deployment

  • Manual: Map a drive to \\Coreserver\ldlogon and run 'wscfg32.exe -f'
    This is used for single client installs and testing
  • Push: Schedule a push of the full agent
  • Self-Contained EXE: Create an EXE that can be installed
  • Advance Agent: This is a two stage process. The Advance Agent consists of a small MSI and a self-contained EXE. The MSI is deploy to the client and then the MSI downloads and installs the EXE. This allows for bandwidth friendly downloads.
For more information on agent configuration and deployment see Ivanti Community Doc 23482

Manual installation of the client patch

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

  1. Double-click on the self-extracting executable and extract it
  2. Extract the files for the appropriate patch
  3. From the extracted files, run Setup.exe
  4. When Setup completes, reboot the machine if a reboot is required.

Updating the Agent With Patch Manager

Ivanti Patch Manager can also be used to update agent machines with the patch. Content and definitions can be found in Patch Manager as Ivanti Updates and can be used to detect and repair agents that have not been updated. The Core Server must be updated with the Core patch before updating agents.

Not all Component Patches will have Patch Manager Content created. Once it is generally available, this method can be used to update agents. For more information about updating agents using Ivanti Patch Manager see Ivanti Community Doc 24384

Please review the following important information about this release BEFORE installing this update.

Feature Changes and Updates

The following features have been changed or updated

Client Notifications

  • Windows Notifications for RC Server UI (508 compliance)
    • -
  • Implement Ivanti Notifications Manager
    • -
  • Install Toast Notifications Manager on Core
    • -

Endpoint Security

  • Isolate more than one computer at a time
    • -
  • Add specific EPM permission to isolate/recover a device from the network
    • -
  • Add auditing support for EPS network isolation
    • -

Linux

  • Add Download File, Execute File, and Continue on Failure to Bootix templates
    • -
  • Create new Execute Shell Script action for Bootix templates
    • -
  • Client Connectivity Agent Settings For Linux
    • -
  • Support Cloud Services Appliance (CSA) in the Linux Agent
    • -
  • Autofix based on Patch Groups (Scope)
    • -
  • Ubuntu 20.04 support
    • -
  • Main Linux Agent config UI changes
    • -
  • Add Linux settings to Distribution and Patch Agent settings UI
    • -
  • Add Linux settings to Inventory agent settings UI
    • -

Mac

  • Add QR code for iOS enrollment - Code
    • -
  • Reset EPM Agent using a MDM Package
    • -
  • Added support for MacOS 11.0 "Big Sur"
    • -
  • Enable / Remove activation lock
    • -
  • APNS: Create APNS Cert from new console UI
    • -
  • VPP Apps now available for Portal Manager
    • https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-ios-portal

MDM

  • Android extension app
    • -
  • New iOS MDM Enroller submitted to iOS App Store
    • -
  • Create new column sets for MDM as defaults in EPM columnset UI
    • -
  • Remove MDM Compliance agent settings
    • -
  • MDM Configurations- Create new general direction and content for initial MDM user
    • -

Patch Automation

  • Patch Automation Feature Phase 1
    • https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-patch-automation

Patch Manager

  • Add "Enable directory browsing" option to the office 365 patch utility
    • -

Remote Control

  • Enhance RC HTML5 to support NTLMv2 Authentication
    • -
  • Add DNS name into the client certificate (in case of no windows domain) for RC verification in browser
    • -
  • Remote Control RCViewer - UI Full Screen and Alt-Tab Support
    • https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-remote-fullscreen

Software Distribution

  • Enhanced reboot notification on Windows 10 and Windows Server 2016 and 2019 to use Windows Notifications
    • Requires Windows 10 1903, Server 2016, or Server 2019 and later versions. Agents will automatically fall back to legacy reboot prompts if version specs are not met. https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Default.htm#cshid=wn-reboot-ac

Win Console

  • Enhance Windows Console to Validate Certificate when Connecting to EPM Core Server
    • -
  • Remove default behavior for expanding "My agent settings" under Agent Settings
    • -

Defects Fixed

Agent

  • 640822 Remove Unsupported Agent Configuration from EPM Console
    • Remove the HP ThinPro Linux configurations from the core as they are no longer supported.
  • 645663 Advance agent deletes existing broker certificates
    • Modified cba8cleanup.exe to save and restore the broker.csr file. With this file missing on a reinstall, brokerconfig /n thinks the certificate is not present and deletes the existing certificate and gets a new one.
  • 647649 Addressed potential rights elevation issue
    • Security enhancement to prevent permission elevation.
  • 664649 fwregister.exe does not add MTFTP Windows Firewall exception for Win10 devices
    • Fixed issue related to fwregister not putting firewall exceptions for services like MTFTP that would start, but stop quickly due to no work to do or not being a CSEP elected device.
  • 674237 Standalone Agent Install executable does not request to elevate rights when launched
    • Fixed the Windows standalone agent install to automatically attempt to run as administrator with elevated rights.
  • 677311 Client machines are getting CISMBIOS.sys warning messages in event viewer (event ID 54)
    • CISMBIOS errors in the Windows Event Viewer: “The CISMBIOS service failed to start due to the following error: The filename, directory name, or volume label syntax is incorrect.” should not occur anymore.
  • 688543 NTStaCfg.in# is incorrect leading to missing tasks that lead to connectivity issues on the client
    • The EXEC entries in the agent config ini files (e.g. ntstacfg.ini, default windows configuration.ini, etc) must be unique per section, and there was a duplicate exec number (EXEC305 in the [Common Base Agent Post Copy] section) which caused the second entry to be ignored. We modified the file so there were no duplicates.

Alerting

  • 678010 Alert service crashing due to blank computer device ID in database
    • If by any means a computer device ID would end up being null in the database, the alert service will not crash.
  • 707652 Alertsync.exe is calling lddwnld.dll repeatedly, and re-downloads the Alert Settings
    • Alerts behavior (alert rulesets) will not unnecessarily be downloaded if there are no updates
  • 720864 Not possible to kill processes using Real time monitoring and inventory in environments without DNS
    • If hostname resolution is not available but direct IP communication is available, commands to kill processes from the RTM/web console is possible now.

AMT\vPro

  • 652728 Intel KVM not working in Windows 10
    • Intel KVM is now working with Windows 10 in some environments. For customers who still can’t get KVM working, follow the instructions on https://forums.ivanti.com/s/article/Intel-KVM-not-working-in-Windows-10
  • 722751 Updated OppenSSL files
    • -

AntiVirus

  • 572578 AV-100 not detecting Bitdefender Antivirus
    • Vulnerability AV-100 fails to detect Bitdefender Endpoint Security Tools as installed on an endpoint.
  • 654168 LANDesk Management - Agent Settings - Ivanti Antivirus 2017 folder shows in inventory tree even without it installed
    • Ivanti Antivirus 2017 folder is created in Inventory under LANDesk Management > Agent settings in the EPM console for agents on which Ivanti Antivirus 2017 is not installed.
  • 669568 Proxy settings do not come from EPM Management Console to Bitdefender Update server(generalsettings.xml)
    • In some cases, the configured proxy server is not used by the Antivirus Update Server.
  • 674793 Vulscan shows AVNewBehavior setting showing up twice when updating latest settings
    • Vulscan shows AVNewBehavior setting showing up twice when updating latest settings.
  • 701652 Ivanti Antivirus BD v6.6.18.265 - Failed to get last update time - change text
    • Wrong last update time message for Ivanti Antivirus was changed to provide accurate information.
  • 716707 AV 2017 folder protection exclusions don't work when using variables
    • Cannot use some custom variables with folder exclusion in Ivanti AntiVirus 2017 Agent Settings.
  • 725516 Selecting Manage Devices for Crowdstrike integration gets the error" Connection failed object reference not set to an instance of an object.
    • Reported CrowdStrike Managed Devices with null fields defaults to empty values.

Cloud Services Appliance

  • 662731 BrokerServiceActivity.log is not getting controlled by MaxSize setting in BrokerServiceConfig.xml as it should.
    • Fixed an issue so that the BrokerServiceActivity.log log file is controlled by MaxSize setting in BrokerServiceConfig.xml as it should.

Core Sync

  • 725897 SchedPkgUpdate does not recalculate SHA256 hashes if the MD5 hash is still present
    • Schedpkgupdate.exe was fixed to check the sha256 column when determining if a package needed to be re-hashed. Note that schedpkgupdate.exe is automatically run every 30 seconds by the scheduler, so there could be up to a 30 second delay before package re-hashing is started.

Data Analytics

  • 494308 Column Size & Type are specified on the Windows Console(GUI) are not included in an actual database table.
    • When using nvarchar data types in the custom data forms the database will reflect the correct column size for the custom field.
  • 531874 Archiving Linux devices to Asset Control generates errors
    • -
  • 644110 Dell Warranty rule is giving 401 error
    • Due to the Revamp of the new Dell API, we've updated the Dell Warranty rule to accept a client id and client secret to receive information from dell. To use this, please create a new Dell Warranty rule and supply your Client ID and Client Secret, and apply an appropriate schedule for the rule, in order to use the new features. Currently, this rule does not support the 'Real-Time' functionality of DA so it is recommended that it be scheduled for now.
  • 727075 Adding SNMP Login in Data Analytics is not working for SNMPv1 and SNMPv2. SNPMv3 works.
    • -

Endpoint Security

  • 662928 USB Volume will be added to the Known Volumes during Vulscan
    • -
  • 667614 AMHelper.exe is deleting Appsense configuration file "configuration.aamp" then stopping Ivanti Application Management service from Appsense
    • Cannot change Application Control configuration using EPM task if appcontrol agent was a stand alone installation.
  • 668729 When EPS settings are copied from "All settings" to a users "My settings" the last saved by user changes to the user who copied the setting.
    • When EPS settings are copied from "All settings" to a users "My settings", the last saved by user of the original settings changes to the user who copied the setting. It also changes the last save date of of the original settingsto when the setting was copied.
  • 669098 With EPS enabled updating Windows 10 from one version to another fails
    • Endpoint Security real-time file analysis may cause sharing issues with files located in C:\$WINDOWS.~BT\ preventing the Windows upgrade to complete correctly.
  • 691201 Privilege Management - security activity overview empty
    • Security Activity - Privilege Management displays events overview.
  • 692361 Remote Console Unable to Isolate Device
    • Unable to Network Isolate an agent from Remote console if the user is not Landesk Administrator
  • 708988 Invalid privilege management configuration
    • Privilege Management configuration import may fail if it contains some Chinese characters.

Inventory

  • 440405 Inventory data for "Server Roles and Features" is garbled
    • Fixed issue where Server Roles and Features data in Inventory was being converted twice to UTF8 for transport. Now gathers it correctly.
  • 487440 The primary owner is displayed with dbcs characters on some devices
    • Enhanced ldapwhoami.exe with full Unicode compatibility so that primary owner data would be reported correctly for double byte languages.
  • 514609 Services (680) - Flush map file new.jfm shows up randomly in the Event Viewer
    • Fixed an issue where ESENT events showed up in the event log when the inventory scanner runs on the EPM core server.
  • 598980 Corruption on french core servers freezes and the console when it is linked with a rollup core
    • Modified the query name and logs columns for tasks so that they aren't part of inventory when tasks are refreshed.
  • 639910 Inventory OU output contains invalid characters
    • Enhanced ldapwhoami.exe to support Unicode for AD data. For eDirectory use it uses MBCS.
  • 667222 Computer.Processor.Processor Count Not Accurate
    • The Windows inventory scanner was enhanced to report the following values by retrieving the values from WMI: "Computer"."Processor"."Package Count""Computer"."Processor"."Package Cores"
  • 671458 "Detected Vulnerabilities in Last N Days" report not returning any results
    • Changed the "Detected Vulnerabilities in Last N Days" report to show detected vulnerabilities without being dependent of the vuldefs having the autofix flag. Previously if the vuldef did not had the autofix enabled it was not displayed in the report.
  • 676203 Inventory Server Service does not appear to remove orphaned Fileinfo entries at start service start time
    • When there are too many orphaned fileinfo records, the inventory service will now clean them out in stages so that the queries do not timeout.
  • 694020 Event ID 4100 Errors in Event Viewer - Increase Column Sizes - Database
    • Increased some column sizes in the EPM database where we have had customer data that exceeded the current column size. Tables affected:BiosSettings,EnvironSettings,PeripheralAdapters.
  • 710371 Inventory Server does not use parameterized queries to load data when processing scans
    • As a performance optimization in MS SQL, the Inventory Service data loading has been modified to to use parameterized queries.
  • 714218 DeviceID visible in database and in client registry are different for same device. Multiple duplicate sourceid's in the restoreids table.
    • Fixed issue to avoid having duplicate sourceid's in the restoreids table in the SQL database which caused the loading of device ID's that needed to be restored to fail in the web service (ScanInstructions).
  • 716576 ESENT Errors in Event Viewer when inventory scan is ran
    • Fix for ESENT errors on Windows client machines in the event viewer when the inventory scanner runs.
  • 723840 Softmon.exe handle leak - number of handles growing constantly over time.
    • Fix for a handle leak in softmon.exe.
  • 728630 'Full Name' in DBCS is garbled in Inventory tree.
    • The "Full Name" attribute in EPM Inventory now supports DBCS characters to avoid what appeared to be garbled characters.
  • 731366 Inventory should truncate application error results to less than or equal to that of the length that won't cause it to go to errorscan
    • In EPM Inventory, "Application Errors - Application Name" is now truncated to 100 characters max to avoid failures when trying to store the data in the database.
  • 735346 Inventory scanner returns incorrect IP address (home network instead of VPN) intermittently
    • Fix for inventory mini scans to send direct to the core server so that network interface changes are reported correctly.

Licensing

  • 692366 Product activation not working - Some network security appliances block IE traffic prior to version 11
    • Removed the "MSIE 6.0" header from the Activation HTTP request to avoid getting incorrectly blocked by some network security software.
  • 715545 Product activation not working - large activation requests being swallowed
    • A change was made to fix an issue with some EPM core servers not being able to activate when the activation file was large.

Linux

  • 650574 Unable to Push Linux Agent with Non-Root User
    • The linux agent prevents a two installations from running at the same time by placing a lock file in one of several directories (/var/lock, etc.)  The first directory that exists in the list is used, but an unprivileged user may not have permission to write the lock file in the chosen directory causing the script to fail.  The lock file is now written into the /tmp directory where an unprivileged user has permission to write.
  • 656499 Custom Scripts do not work with Linux clients after 2019 SU3
    • A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
  • 656500 SWD / Policies fail with 2019 SU3
    • A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
  • 659767 Ubuntu Workstation /UI does not run scheduled inventory, vulscan, etc from the expected crontab
    • The script to configure the crontab was run with a flag to terminate the script in the event of an error to protect against writing a bad crontab entry.  When reading the current crontab, modifying, and rewriting it, a command returned a non-zero code and terminated the script.  The non-zero return code was not a failure, so the command result was modified to allow the script to continue and correctly write the crontab.
  • 663911 Linux shell scripts do not handle file redirects > or >> properly
    • In some cases, the command was being run without the context of a shell.  The command needed the shell context for file redirect to be interpreted correctly.  All shell scripts are now run in the context of a shell.
  • 669074 Vulnerability Scans consuming Excessive CPU on RHEL
    • The underlying issue is a handful of security tests which scan the entire harddisk.  In this instance the scanned disk was an large nfs mounted disk.  The issue will have to be resolved by a change to content to not search nfs mounts; however, customers can disable the security tests on the core to avoid the issue.
  • 669251 Linux agents missing Network TCPIP Address
    • The missing TCPIP  fields were added to the inventory. 
  • 669282 Pull install appears to complete successfully but the machine never appears on the core: Raspbian 8
    • A gcc optimization bug was preventing raspian 8 from completing successful. 
  • 670920 Pull install appears to complete successfully but the machine never appears on the core: AIX7
    • A regression in the sharedtech communication library (cba8) did not allow AIX to properly find the executable path which is used to load the cert file for communication with the core.  
  • 679013 pds2d runs with elevated privileges under systemd
    • When removing the pds2 dependency on xinitd and moving to systemd, debian's version of systemd did not support running as the user nobody.  A regression removed the user nobody, but didn't replace it with a new unprivileged user.  This repair creates an unprivileged ldnobody user and runs pds2 as that user.
  • 683276 Nixconfig installs missing package successfully but fails with installation error
    • Variables in a shell script are global to the script.  A return value variable inadvertently changed a variable with the same name in a calling function.
  • 690459 PolicyEngine locks pid indefinitely if process is killed prematurely
    • An exceptional failure would leave the pid file indefinitely on the agent preventing future policy runs.  A stranded pid file is now correctly removed if it is no longer related to an actively running policy.
  • 694137 Software Distribution fails on Ubuntu 20.04
    • A typo in the debian dpkg installation of pds2 used the rpm symbol for expansion rather than the dpkg symbol which caused pds2 not to be correctly launched on ubuntu 20 systems.
  • 700187 AIX is unable to send inventory to an EPM 2020 Core
    • A regression in the sharedtech communication library (cba8) did not allow AIX to properly find the executable path which is used to load the cert file for communication with the core.  
  • 701496 AIX Inventory Scan provides multiple primary users
    • The unix agent stores results in a sqlite database.  A new primary user was added rather than updating the database entry, creating a list of primary users instead of one.
  • 706169 Communicate software distribution status even after timeout
    • The software distribution task that ran as a part of vulnerability had a 120 second timeout.  Slow machines that require longer were timing out before the task completed.  The timeout was extended to 960 seconds.  On timeout, the status is correctly reported back to the core.
  • 725522 Console - Linux Agent Configuration - Core Server reference change is not saved.
    • The Linux agent configuration dialog now correctly loads the core server name from the agent configuration, instead of displaying the default value.
  • 726239 Alarm went off message in the Inventory Scan log
    • In some situations, network inventory can run afoul of a 5 minute network timeout.  The expected timeout for inventory was 30 seconds.  The timout has been increased to 10 minutes to accommodate hitting the network worst case timing.

Mac

  • 540479 Script deployment packages for Mac may not return error codes properly
    • Previously, script deployment packages for macOS device did not return error codes properly. We only reported if the command succeeded or failed. If the script said "exit 0" we would report success. Whether the script said "exit 1" or "exit -1" or "exit 32" we would report failure. We now properly encode the script result into the return code, which is properly reported on the core
  • 598798 Portal Manager not "Aware" that OSUpdates have completed - Reboot issues
    • Vulscan was updated so that if a patch, such as a patch to macOS, reboots the machine during the installation process, it will be launched after the reboot with the same parameters as before. If the patch was successfully installed, the status will be reported to the Portal Manager app. If the patch failed to install properly for some reason, such as the device losing power, vulscan will run again and try the patch one more time. If the patch is installed correctly after retrying, a success will be reported to Portal Manager. If the patch failed to install after retrying, a failure will be reported and vulscan will not automatically try again.
  • 639362 Mac Agent not registering with the RC Tunnel
    • -
  • 645693 macOS patch doesn't report successfully done
    • Vulscan was updated so that if a patch, such as a patch to macOS, reboots the machine during the installation process, it will be launched after the reboot with the same parameters as before. If the patch was successfully installed, the status will be reported to the core. If the patch failed to install properly for some reason, such as the device losing power, vulscan will run again and try the patch one more time. If the patch is installed correctly after retrying, a success will be reported to the core. If the patch failed to install after retrying, a failure will be reported and vulscan will not automatically try again.
  • 652725 LD download times out while trying to pull large files.
    • File downloads associated with patch and provisioning were limited to 20 minutes. This is an unreasonably short time when macOS patches and installers can be 2 - 8 GB. This limit has been upgraded to 4 hours.
  • 661145 Client Data Storage grouping Devices together with NULL Serial Number Value
    • The cause of this issue was a defect in the mdm inventory code. The inventory was being reported incorrectly, resulting in inventory records with null deviceIDs. In particular this caused issues when using Client Data Storage for storing FileVault recovery keys and other secured information. The defect in the mdm inventory code has been resolved, and a database script has been made available through technical support to repair databases which were affected by this issue.
  • 674249 Create public key button in Add Apple DEP Token window gives missing cert error after EPM core upgrade
    • -
  • 707189 LDAPM Segment Fault when going through CSA
    • ldapm was crashing when running through a CSA, when the device was joined to a domain. Running through the CSA meant that most likely the device would have to use cached domain info when asking the core to resolve group membership for the device. Accessing the cached data was causing an object to be freed when it should not have been. This issue has be fixed
  • 707651 Primary Owner field is missing in macOS inventory scans
    • -
  • 708626 CPE improperly limits size content cache to 2GB, which isn't that useful
    • The Configuration Profile Editor, and then, the EPM core code that imports the created configuration profiles, limited integer data to 32 bits. This is too small a number to adequately represent items like disk size, cache size (for macOS content caching), and others. This has been fixed, and integer data is now limited to 64 bit integers where appropriate.
  • 727060 Unable to deploy iOS custom apps via VPP
    • The 3rd party service we use to obtain information on applications in the Apple App Stores doesn't necessarily provide information about custom business apps distributable via Apple VPP. When the 3rd party service was unable to return information on an app, it would not be available in the EPM Core UI that configures VPP App distribution. This has been resolved.
  • 735312 Mac agent does not upgrade for some machines
    • The mac agent manifest package was edited so that if the installer is renamed to ivagent-reset.pkg instead of ivagent-complete.pkg it will first run the uninstallmacagent.sh script before installing the mac agent. In order to to do this, follow the stEndpoint Security at https://help.ivanti.com/ld/help/en_US/LDMS/10.0/Mobility/mobl-agent-auto-install.htm to set up the mac agent for distribution through MDM. However, rename the package (and update the package URL) to be ivagent-reset.pkg.
  • 735318 Mac agent stops working after a random period of time
    • Recent macOS changes have created issues for how our EPM macOS agent processes communicate with each other, causing some agent activities to stop. The communication issues between agent processes have been resolved in recent versions of the macOS agent. But older versions of the agent can become non-functional, running on the latest versions of macOS. This requires a full upgrade of the agent, which may be impossible via the old agent. We've added a version of the mdm-installable agent installer that 'resets' the agent, by fully removing the previous agent install before installing the latest version.
  • 741819 ldiscan hangs if interrupted while trying to communicate to the core
    • When communicating with the core, interrupting ldiscan can cause it to hang (for example, when the device is put to sleep by closing its lid, or when a user logs out, disabling wifi network connectivity). This can stall the local device scheduled inventory tasks, making the task queue grow in size unexpectedly, which creates unacceptable cpu and memory loads for the scheduler. The scheduler now enforces a limit on the amount of time a scheduled task can run of 4 hours. In general, processes run via the local device scheduler should take more than 30 minutes.

MDM

  • 677727 Co-management behavior for distributing MDM can be catastrophic
    • Adjusted wording for the co-management/agent automatic deployment over MDM so it is clear that the agent install process will occur upon next MDM sync for devices without the agent. Before it was worded that the process only would occur upon MDM enrollment.
  • 681366 iOS Configuration Profile Editor is not showing possible variables
    • -
  • 682821 In Android Enterprise mode, fully managed, possible to install apps with personal google account through public playstore
    • Added a checkbox to Android Restrictions policy called "Remove play store apps that are installed from personal accounts". The default is checked, but to not remove user's apps, uncheck and user-installed apps will remain on the device.
  • 684630 Users granted Modern Device Management rights unable to create/edit Mobility profiles
    • -
  • 707275 Android Enterprise MDM - Inventory information is inaccurate on serial numbers
    • Implemented an "extension" app that retrieves the correct serial number from the android device and returns it to EPM to replace the incorrect serial number in the database and in the console.
  • 713039 WNS UI code incorrectly generates error if I enter a valid Package SID
    • -
  • 716474 Chromebooks fails to create inventory scans
    • The HwLastScanDate was not included in delta scans which sometimes causes that field to become NULL in the database. That caused a failure in processing chromebooks and some would not get processed. Fixed by adding HwLastScanDate to delta scans and also self-healed records that contained NULL for that field value.
  • 722264 Allow apps in play store checkbox also affects work profile Android device
    • -
  • 725563 Configuration Profile for GMail / Office 365 failing with "Try reentering password"
    • The domain portion of the user account is now being set correctly based on the forest information. This will allow gmail to properly line up the account information and prompt the user for a password and accept it if correct.When using outlook.office356.com, have the customer set the username variable to use $emailaddress$.

Neurons

  • 713311 Ivappmonsvc.exe High Memory on Ivanti Cloud Agents
    • AppMon is utilizing high amounts of memory on computers with Ivanti Cloud Agent installed.

Patch Automation

  • 724496 Patch Automation --- Emails do not work
    • Sending emails feature for Patch Automation actions was optimized. Previously it would throw timeout errors in some scenarios.

Patch Manager

  • 521986 LDReboot continues to prompt for reboot immediately after being snoozed
    • Several logic and timing issues were corrected in LDReboot to make the snooze functionality more reliable.
  • 606088 Unable to set up automatic definition download setting to move Office 365 definitions to custom filter during download
    • Creating a filter now for Click to Run product found while searching for Office, will properly group up all the office definitions
  • 632542 Agentless Vulnerability Scanner does not work with NextGen definitions
    • Agentless Vulnerability Scanner missing files added.
  • 649988 Severity Type column is incorrect at times, will show NA instead of correct severity
    • Severity type for vulnerabilities should be more consistent now. Previously some vuldefs were incorrectly displaying NA for severity type.
  • 660400 Repair fails when command line in vulscan specifies group
    • When Vulscan is ran with a group specified to repair (example Command line: /showui /repair group=384) for a vulnerability definition in which there are standalone detection rules between workstation/server (ex MS20-01-W10-4534271_INTL) it should successfully patch the vulnerability for each scenario (workstation or server)
  • 670584 Impossible to change patch download location for MSO365 Patches
    • The O365 download process will lookup both 32/64 registry locations now for the configured patch location path.
  • 674860 Download Updates window isn't scalable and is too tall for 1024x768 resolutions
    • The Download Updates Window should fit properly now when displayed on 1024x768 resolutions
  • 675400 New Patch Task Template now requires you to select repair group in 2019.1 SU3
    • An unwanted behavior was added when creating a repair task. We fixed the requirement to select a group of vulnerabilities even if this wasn't supposed to be required.

Provisioning

  • 642519 "Launch Template" action doesn't show Team Templates
    • -
  • 651927 Device name prompter pops up behind other windows in winPE provisioning
    • In certain customer environments, the Device Name Prompter window would inadvertently appear behind other windows. We now always keep the Device Name Prompter on top of other windows.
  • 656884 MBSDK Provisioning tasks created with CreateProvisioningTask failing immediately after start
    • Fixed an issue where provisioning tasks created with the CreateProvisioningTask api fail immediately after being started.
  • 678704 Multicast provisioning fails with image size roughly 200GB in size or larger
    • Made enhancements to file multicast to better support large files such as those bigger than 200 GB.
  • 734978 PXE registry force key no longer works
    • Updated the new selfelectcontroller use the ServiceName_WIN registry keys again so that a client self-electing service can be assigned to a new specific device.

Remote Control

  • 455713 HTML5 RC issue when using long password
    • Fixed an issue that would prevent HTML5 RC authentication when trying to use a long password.
  • 678285 RC Tunnel increased limits are not applied during CSA boot up
    • Fixed an issue that could would cause the tunnel service on Linux not to open more than 2000 connections at any given time.
  • 678287 Legacy RC tries to connect to the incorrect CSA when multiple CSAs are in the environment.
    • Fixed an issue that caused legacy remote control not to choose the correct CSA if many CSA's were configured.
  • 679971 Remote Control WS remote execute cmd/ps Fail to run other than local system
    • Fixed an issue that prevented users from running a cmd.exe or powershell.exe remotely in a remote control session.
  • 685206 Installation of enurcsetup.exe fails.
    • Fixed an issue that was preventing the updated legacy remote control viewer from being updated in the SU patch.
  • 692571 RCClient.exe remote control agent for CSA is failing - curllib.dll was not found
    • Fixed an issue with standalone legacy rcclient.exe not installing correctly due to missing curllib.dll.
  • 695671 LDWebApp pool to crash
    • Fixed a remote control issue when multiple remote control tunnels were used. The root cause was a threading issue in the Ivanti RemoteControlAuth web service. The crash of RemoteControlAuth also caused the LDWebApp IIS pool to fail.
  • 705536 Tunnel loses connectivity but does not unregister the device
    • Fixed an issue that could cause the Remote control tunnel to stop monitoring connected devices in some situations. This would cause routers to potentially think the connection was inactive and kill the connection.
  • 709336 RCviewer shows black screen due to displaying secondary monitor
    • Fixed the WS remote control viewer to properly select the primary monitor when first starting a remote control session. Otherwise users could see a secondary monitor which may just be a black screen.
  • 729711 RC WS mouse not moving issue
    • Fixed an issue where the mouse could get stuck in the upper left part of the screen during a remote control session on some non-English versions of Windows.

Reporting

  • 644413 Can not send report by email using SMTP port 587
    • Sending a report via mail by using a SMTP with port 587 was not possible. Support was added and emails can be sent now through 587.
  • 661872 "Export as csv" shows a wrong output when the query results are zero
    • Export to CSV from a query fixed to write the proper results when a query returns no results.
  • 709669 The additional variables that we offer for Alerting are not functioning
    • Variables such as %infectionname%, %objectname% etc can properly be used now when creating an email body for an alert. example: an email body like this: Infection %infectionname% was successfully removed from %objectname% for an email alert configured to be fired when an infected file is removed from an endpoint by the Ivanti antivirus software will show the name of the infection that was found and removed and from which object name (endpoint hostname)

Software Distribution

  • 608808 Open a Software Package is very slow. It takes up to 2 min to open a Package.
    • For the case of opening a software distribution package, re-wrote the file location reducing code with a much faster algorithm. Also added a location cache for subsequent location accesses for either the primary package locations or the additional files locations. The location cache is automatically updated when new locations are added.
  • 641220 Software Distribution edit permissions allows user to move packages/bundles from Public Packages to My Packages
    • Fixed a permissions issue allowing a user with the Edit permission under Software distribution > Distribution packages allowed them to move packages/bundles from Public packages to My packages and make changes. Now they can only be copied, instead of moved.
  • 662007 Problem when processing package bundles in which first bundle has a reboot action
    • Fixed an issue to allow the first bundle in a Software Distribution package bundle to have a reboot action.
  • 672039 LDAP resolution over the CSA may fail
    • Enhancement made to ensure that the user is in trusted by machine domain.
  • 686674 Package Bundle shows completed in console, although installation stopped in the middle of processing.
    • For Software Distribution, fixed issue ignoring pending reboot for MSI 3010 return code.
  • 687545 Unable to download files with special characters "&" in the file name via http
    • Software Distribution now properly decodes file names with the '&' character.
  • 697088 Unable to uninstall MSI when using UNC share path
    • Uninstall a MSI package by using its Product Code. If the MSI package does not has the Product Code, download and uninstall using the package.
  • 701950 Download percentage skips from 0 to 100 in Portal Manager tasks
    • A bug introduced in 2020.1 was fixed; the download percentage bar in the portal manager now works correctly.
  • 710531 "Additional Files" section is missing from the "Managed Scripts - Create file deployment script" window.
    • Fixed an issue where the additional files window didn't show in the Managed scripts - New File Transfer Script dialog.
  • 717033 ​​​​​​​The Windows 10 notification feature of EPM 2020.1 SU1 could cause data loss under a certain circumstance.
    • Reboot notifications are now properly removed from the Windows Notification Center on reboot/shutdown, whether initiated from LDReboot or by other means.

Web Console

  • 682823 Addressed potential issue around alert logging
    • -
  • 682836 Addressed potential issue for file uploads
    • -

Known Issues

Remote Control

  • 751159 HTML 5 from console fails with Auth message on 2020.1 SU2 agents only
    • https://forums.ivanti.com/s/article/HTML-5-from-console-fails-with-Auth-message-on-2020-1-SU2-agents-only

Files in this patch

ActiveNotifyer.exe
68.35kB
11.0.3.1482
9/1/2020 5:48 PM
AgentConfig.exe
87.99kB
11.0.3.1283
7/29/2020 6:59 AM
AGLSManager.exe
1.40MB
11.0.3.1339
8/10/2020 9:41 AM
alert.exe
329.60kB
11.0.3.101
7/31/2020 11:32 AM
alert_x64.exe
392.70kB
11.0.3.101
7/31/2020 11:32 AM
alertrender.exe
231.26kB
11.0.3.101
7/31/2020 11:32 AM
alertservice.exe
311.96kB
11.0.3.1283
7/29/2020 6:59 AM
AlertSync.exe
233.29kB
11.0.3.1283
7/29/2020 6:59 AM
AMHelper.exe
88.99kB
11.0.3.539
4/23/2020 5:31 AM
AMTConfig.Data.dll
176.77kB
11.0.3.1560
9/11/2020 1:35 PM
AMTProvMgr2.exe
2.30MB
11.0.3.1560
9/11/2020 1:35 PM
ApmService.dll
57.14kB
11.0.3.1136
6/29/2020 2:58 PM
Auditing.Schema.xml
15.48kB
-
6/5/2020 11:11 AM
AVBiz.dll
255.47kB
11.0.3.1140
7/1/2020 1:22 AM
AVUI.dll
3.09MB
11.0.3.1365
8/13/2020 7:10 AM
BouncyCastle.Crypto.dll
2.13MB
1.8.15362.1
9/21/2020 8:33 AM
BrokerConfig.exe
1.44MB
11.0.3.1304
7/31/2020 12:06 PM
BrokerConfig.xml
2.69kB
-
8/20/2020 4:17 AM
BrokerConfig_x64.exe
1.79MB
11.0.3.1304
7/31/2020 12:06 PM
brokerservice.exe
2.14MB
11.0.3.1304
7/31/2020 12:04 PM
CaptureImageHandler.exe
409.80kB
11.0.3.1579
9/15/2020 12:21 PM
CaptureImageHandler_x64.exe
504.68kB
11.0.3.1579
9/15/2020 12:21 PM
cba8cleanup.exe
158.70kB
-
7/31/2020 11:32 AM
cba8inst.msi
6.52MB
-
7/31/2020 11:32 AM
CefSharp.BrowserSubprocess.Core.dll
1.17MB
79.1.360
2/10/2020 8:36 PM
CefSharp.BrowserSubprocess.exe
6.50kB
79.1.360.0
2/10/2020 8:36 PM
CefSharp.Core.dll
1.77MB
79.1.360
2/10/2020 8:36 PM
CefSharp.Core.xml
81.40kB
-
2/10/2020 8:36 PM
CefSharp.dll
214.50kB
79.1.360.0
2/10/2020 8:35 PM
CefSharp.WinForms.dll
28.00kB
79.1.360.0
2/10/2020 8:36 PM
CefSharp.WinForms.xml
45.97kB
-
2/10/2020 8:36 PM
CefSharp.Wpf.dll
82.00kB
79.1.360.0
4/10/2020 9:02 PM
CefSharp.xml
648.98kB
-
2/10/2020 8:35 PM
ChangeSettingsHandler.exe
447.12kB
11.0.3.972
6/8/2020 9:51 AM
chrome_elf.dll
946.50kB
79.0.3945.130
1/30/2020 5:47 AM
ClientConfig.dll
2.28MB
11.0.3.1593
9/17/2020 6:06 PM
ClientConfigLinux.xml
857.00 B
-
7/7/2020 1:18 PM
ClientConfigLinuxEmbedded.xml
397.00 B
-
7/7/2020 1:18 PM
ClientConnectivityBehavior_apply.dll
462.80kB
11.0.3.590
4/28/2020 5:51 PM
ClientPackager.dll
53.10kB
11.0.3.944
6/4/2020 1:04 PM
ClientRollingLog.dll
20.92kB
11.0.3.510
4/13/2020 6:14 PM
Commands.xml
13.68kB
-
9/24/2020 9:19 AM
Console.exe
65.21kB
11.0.3.1082
6/16/2020 10:57 PM
console_rptfiles.cab
954.34kB
-
8/27/2020 1:20 AM
core.secure.dll
93.45kB
11.0.3.865
5/28/2020 5:16 PM
CoreProfiler.exe
30.96kB
11.0.3.1188
7/9/2020 4:35 PM
coresigner.dll
1.26MB
-
7/31/2020 11:32 AM
coresigner_x64.dll
1.55MB
-
7/31/2020 11:32 AM
CoreSyncService.exe
43.57kB
11.0.3.1393
8/18/2020 6:06 PM
CreateLANDeskRights.exe
28.46kB
11.0.3.1192
7/10/2020 5:16 AM
CreateTunnelArchive.exe
15.85kB
11.0.3.1215
7/15/2020 10:05 AM
curllib.dll
2.38MB
7.57.1
8/20/2020 1:05 PM
curllib_nossl.dll
670.00kB
7.57.1
7/6/2020 4:30 PM
custjob.exe
2.71MB
11.0.3.972
6/8/2020 9:50 AM
CustomDataForms.dll
2.70MB
11.0.3.972
6/8/2020 9:51 AM
d3dcompiler_47.dll
4.14MB
10.0.17134.12 (WinBuild.160101.0800)
1/30/2020 3:03 AM
Datamart.xml
874.44kB
-
8/25/2020 1:23 PM
Datamart_DataProtect.xml
3.26kB
-
3/26/2020 3:08 PM
DatamartPM.xml
71.25kB
-
7/3/2020 8:28 AM
DBRollup.exe
2.11MB
11.0.3.1283
7/29/2020 6:59 AM
DeployImageHandler.exe
449.12kB
11.0.3.1579
9/15/2020 12:21 PM
DeployImageHandler_x64.exe
546.03kB
11.0.3.1579
9/15/2020 12:21 PM
DeviceNameHandler.exe
64.81kB
11.0.3.1304
7/31/2020 12:05 PM
DeviceNameHandler_x64.exe
64.81kB
11.0.3.1304
7/31/2020 12:04 PM
DistributionApi.dll
69.31kB
11.0.3.530
4/22/2020 2:46 PM
EPSUI.exe
677.66kB
11.0.3.518
4/22/2020 2:46 AM
exec.dll
171.23kB
11.0.3.101
7/31/2020 11:32 AM
exec_x64.dll
204.58kB
11.0.3.101
7/31/2020 11:32 AM
execviewer2.dll
189.94kB
11.0.3.856
5/27/2020 5:51 PM
filexfer.dll
201.01kB
11.0.3.101
7/31/2020 11:32 AM
filexfer_x64.dll
237.86kB
11.0.3.101
7/31/2020 11:32 AM
fwregister.exe
145.48kB
11.0.3.978
6/8/2020 4:58 PM
gatewayui.dll
283.71kB
11.0.3.740
5/14/2020 7:15 PM
GatherBitLocker.exe
24.96kB
11.0.3.502
4/2/2020 2:31 PM
genkey.exe
1.28MB
11.0.3.101
7/31/2020 11:32 AM
Google.Apis.Admin.Directory.directory_v1.dll
210.05kB
1.40.2.1505
9/23/2020 3:56 PM
Google.Apis.AndroidEnterprise.v1.dll
143.48kB
1.45.0.1910
9/23/2020 3:56 PM
Google.Apis.AndroidManagement.v1.dll
118.27kB
1.40.2.1630
9/23/2020 3:56 PM
Google.Apis.Auth.dll
131.38kB
1.45.0.0
9/23/2020 3:57 PM
Google.Apis.Core.dll
80.95kB
1.45.0.0
9/23/2020 3:57 PM
Google.Apis.Discovery.v1.dll
38.57kB
1.40.2.0
9/23/2020 3:57 PM
Google.Apis.dll
86.49kB
1.45.0.0
9/23/2020 3:57 PM
GoogleAndroidApiLib.dll
32.03kB
11.0.3.1427
8/25/2020 9:29 AM
GoogleAppsApiLib.dll
41.60kB
11.0.3.1427
8/25/2020 9:29 AM
httpclient.exe
1.70MB
11.0.3.101
7/31/2020 11:32 AM
httpclient_x64.exe
2.14MB
11.0.3.101
7/31/2020 11:32 AM
httprequest.dll
1.68MB
11.0.3.1283
7/29/2020 6:58 AM
idal.dll
543.57kB
11.0.3.972
6/8/2020 9:50 AM
InstallCommon.Version.xml
86.00 B
-
9/21/2020 8:33 AM
Installer.exe
36.03kB
11.0.3.1247
7/18/2020 11:17 AM
installer.xml
1.37kB
-
7/13/2020 4:08 AM
installkey.exe
166.20kB
11.0.3.101
7/31/2020 11:32 AM
interop.idallib.dll
28.50kB
10.1.0.0
6/8/2020 9:48 AM
IpmiRedirectionService.exe
234.29kB
11.0.3.603
4/29/2020 2:12 PM
isscert.dll
1.80MB
11.0.3.1304
7/31/2020 12:05 PM
issproxy.exe
1.82MB
11.0.3.1304
7/31/2020 12:04 PM
isssec.dll
1.74MB
11.0.3.1283
7/29/2020 6:58 AM
issuser.exe
4.37MB
11.0.3.1614
9/22/2020 11:15 AM
issview.dll
772.47kB
11.0.3.856
5/27/2020 5:50 PM
Ivanti.ManagementSuite.CrowdStrikeConnector.dll
28.49kB
11.0.3.474
3/23/2020 2:45 PM
Ivanti.ManagementSuite.PatchAutomation.CommandRunner.dll
24.96kB
11.0.3.1139
6/30/2020 7:46 PM
Ivanti.ManagementSuite.PatchAutomation.Common.dll
81.95kB
11.0.3.1317
8/5/2020 6:53 AM
Ivanti.ManagementSuite.PatchAutomation.DispatcherService.exe
17.39kB
11.0.3.872
5/29/2020 8:16 AM
Ivanti.ManagementSuite.PatchAutomation.Domain.dll
38.57kB
11.0.3.1284
7/29/2020 8:53 AM
Ivanti.ManagementSuite.PatchAutomation.Domain.Interfaces.dll
28.00kB
11.0.3.1211
7/15/2020 1:40 AM
Ivanti.ManagementSuite.PatchAutomation.Infrastructure.dll
44.64kB
11.0.3.1395
8/19/2020 6:09 AM
Ivanti.ManagementSuite.PatchAutomation.Presentation.dll
1.14MB
11.0.3.1567
9/14/2020 9:54 AM
Ivanti.ManagementSuite.PatchAutomation.Services.dll
148.02kB
11.0.3.1395
8/19/2020 6:10 AM
Ivanti.ManagementSuite.Telemetry.dll
32.03kB
11.0.3.1349
8/11/2020 2:38 PM
IvantiCefDLL.dll
69.35kB
11.0.3.1128
6/24/2020 6:40 PM
IvantiNotificationsManagerSetup.msi
180.00kB
-
9/18/2020 10:08 AM
KVMLib.dll
855.30kB
7.0.0.80021
7/2/2020 11:57 AM
LANDesk.AgentConfig.ConfigWriter.dll
45.10kB
11.0.3.1391
8/18/2020 1:38 PM
LANDesk.AlertManager.Business.dll
117.66kB
11.0.3.548
4/23/2020 3:02 PM
LANDesk.Common.RunMethod.exe
20.63kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.DataServices.Database.dll
52.71kB
11.0.3.971
6/8/2020 2:22 AM
LANDesk.DataServices.dll
103.13kB
11.0.3.1017
6/11/2020 10:28 AM
LANDesk.DirMan.Interface.dll
21.42kB
11.0.3.514
4/21/2020 5:52 PM
LANDesk.DrManAPI.dll
35.03kB
11.0.3.514
4/21/2020 5:53 PM
LANDesk.Gateway.Agent.dll
22.93kB
11.0.3.1003
6/10/2020 3:04 PM
LANDesk.Install.Common.Actions.dll
70.55kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.Common.Business.dll
38.00kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.Common.dll
68.50kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.Common.View.dll
90.50kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.ConfigUtility.exe
28.66kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.LDMS.dll
1.67MB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.LDMS.View.dll
19.50kB
11.3.22.87
9/21/2020 8:33 AM
LANDesk.Install.Legacy.Actions.dll
10.00kB
11.3.22.87
9/21/2020 8:33 AM
LANDESK.LDCrypto.Facade.dll
36.07kB
11.0.3.505
4/8/2020 6:55 PM
LANDesk.ManagementSuite.Authentication.dll
176.77kB
11.0.3.1496
9/2/2020 6:42 PM
LANDesk.ManagementSuite.ClientConfigUI.dll
480.83kB
11.0.3.1155
7/2/2020 10:09 AM
LANDesk.ManagementSuite.CloudStorageBiz.dll
18.35kB
11.0.3.1181
7/8/2020 3:48 AM
LANDesk.ManagementSuite.CloudStorageUI.dll
74.35kB
11.0.3.478
3/24/2020 5:14 PM
LANDesk.ManagementSuite.Core.Anonymous.dll
53.10kB
11.0.3.740
5/14/2020 7:16 PM
LANDesk.Managementsuite.CredentialManagerUI.dll
151.05kB
11.0.3.855
5/27/2020 3:54 PM
LANDesk.ManagementSuite.Data.dll
1.40MB
11.0.3.1548
9/9/2020 6:47 PM
LANDesk.ManagementSuite.Database.dll
182.23kB
11.0.3.1563
9/11/2020 5:23 PM
LANDESK.ManagementSuite.GoogleAndroidClassLibrary.dll
23.42kB
11.0.3.1429
8/25/2020 1:17 PM
LANDesk.ManagementSuite.Information.dll
327.49kB
11.0.3.767
5/18/2020 10:42 AM
LANDesk.ManagementSuite.Licensing.Activation.dll
125.73kB
11.0.3.1188
7/9/2020 4:36 PM
LANDesk.ManagementSuite.Licensing.UsageService.exe
137.84kB
11.0.3.1188
7/9/2020 4:36 PM
LANDesk.ManagementSuite.Logs.dll
50.67kB
11.0.3.1496
9/2/2020 6:43 PM
LANDesk.ManagementSuite.Queries.dll
45.03kB
11.0.3.962
6/5/2020 2:07 PM
LANDesk.ManagementSuite.Reporting.dll
2.31MB
11.0.3.924
6/3/2020 3:02 PM
LANDesk.ManagementSuite.RESTful.Resources.dll
100.09kB
11.0.3.1126
6/24/2020 4:50 PM
LANDesk.ManagementSuite.RESTful.Service.dll
260.47kB
11.0.3.1430
8/25/2020 3:26 PM
LANDesk.ManagementSuite.SelfElectionBiz.dll
66.31kB
11.0.3.503
4/6/2020 2:04 PM
LANDesk.ManagementSuite.SmtpEmail.dll
24.85kB
11.0.3.843
5/26/2020 2:50 AM
LANDesk.ManagementSuite.SoftwareDistribution.Business.dll
985.23kB
11.0.3.1541
9/9/2020 10:09 AM
LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
3.21MB
11.0.3.1541
9/9/2020 10:08 AM
LANDesk.ManagementSuite.ToolsXml.dll
28.89kB
11.0.3.1056
6/15/2020 12:14 PM
LANDesk.ManagementSuite.WinConsole.dll
7.29MB
11.0.3.1601
9/18/2020 1:33 PM
LANdesk.ManagementSuite.WinConsole.Help.dll
61.17kB
11.0.3.1093
6/17/2020 11:25 PM
LANDesk.Provisioning.Business.dll
743.12kB
11.0.3.1535
9/8/2020 4:30 PM
LANDesk.Provisioning.WinUI.dll
3.15MB
11.0.3.1507
9/3/2020 2:26 PM
LANDesk.ReportingServices.Publisher.dll
28.96kB
11.0.3.615
4/30/2020 1:53 PM
LANDesk.Scheduler.TaskHandler.dll
347.84kB
11.0.3.753
5/15/2020 1:33 PM
LANDesk.ServerManager.UI.dll
133.80kB
11.0.3.674
5/7/2020 6:59 PM
LANDesk.Shared.RAXfer.dll
32.93kB
11.0.3.101
7/31/2020 11:32 AM
LANDesk.WebConsole.ClientComm.dll
81.35kB
11.0.3.1408
8/21/2020 9:22 AM
LaunchLdprovisionAsUser.exe
179.30kB
11.0.3.972
6/8/2020 9:50 AM
LaunchLdprovisionAsUser_x64.exe
70.38kB
11.0.3.972
6/8/2020 9:51 AM
LaunchPad.Link.WebUI.Business.dll
21.89kB
11.0.3.532
4/22/2020 6:02 PM
LaunchPad.Link.WebUI.dll
61.17kB
11.0.3.532
4/22/2020 6:02 PM
LaunchProcessAsUser.exe
177.30kB
11.0.3.972
6/8/2020 9:51 AM
Lclxclnt.dll
1.30MB
11.0.3.1132
6/26/2020 4:07 PM
ldapinfo.dll
272.14kB
11.0.3.1113
6/22/2020 11:29 AM
ldapwhoami.exe
187.37kB
11.0.3.638
5/4/2020 5:21 PM
LDAVBD.dll
451.69kB
11.0.3.1067
6/16/2020 6:12 AM
LDAVBD64.dll
500.61kB
11.0.3.1067
6/16/2020 6:13 AM
ldavhlpr.dll
1.02MB
11.0.3.1095
6/18/2020 7:48 AM
LDAVKES.dll
1.06MB
11.0.3.1365
8/13/2020 7:12 AM
ldcache.dll
1.04MB
11.0.3.879
5/29/2020 3:09 PM
lddwnld.dll
1.32MB
11.0.3.1602
9/18/2020 2:54 PM
lddwnldClassLib.dll
120.84kB
11.0.3.1602
9/18/2020 2:54 PM
ldheader.exe
187.87kB
11.0.3.944
6/4/2020 1:05 PM
ldheaderRC.exe
187.87kB
11.0.3.944
6/4/2020 1:05 PM
LDInv32.exe
7.28MB
11.0.3.1177
7/7/2020 11:17 AM
ldiscn32.exe
3.53MB
11.0.3.1616
9/23/2020 3:58 PM
ldiscnupdate.exe
1.74MB
11.0.3.1006
6/10/2020 5:26 PM
ldlocalprt.exe
388.20kB
11.0.3.603
4/29/2020 2:13 PM
LDlogs.exe
375.55kB
11.0.3.1609
9/21/2020 6:32 PM
LDMof.exe
182.37kB
11.0.3.1521
9/7/2020 3:38 AM
ldpgp.exe
1.38MB
11.0.3.101
7/31/2020 11:32 AM
ldping.dll
150.09kB
11.0.3.101
7/31/2020 11:32 AM
ldping_x64.dll
179.87kB
11.0.3.101
7/31/2020 11:32 AM
ldProvision.exe
676.63kB
11.0.3.972
6/8/2020 9:51 AM
ldProvision_x64.exe
822.49kB
11.0.3.972
6/8/2020 9:51 AM
ldReboot.exe
3.57MB
11.0.3.1584
9/16/2020 6:26 PM
ldredirect.dll
93.56kB
11.0.3.590
4/28/2020 5:50 PM
LDSecSvc.exe
2.34MB
11.0.3.1213
7/15/2020 6:08 AM
LDSecSvc64.exe
2.99MB
11.0.3.1213
7/15/2020 6:09 AM
LDServerRoles.exe
19.89kB
11.0.3.758
5/15/2020 6:23 PM
libcef.dll
111.45MB
79.1.36+g90301bd+chromium-79.0.3945.130
1/30/2020 6:55 AM
libeay32.dll
1.15MB
1.0.2u
9/11/2020 1:41 PM
libEGL.dll
365.00kB
2.1.0.48aa52f7305a
1/30/2020 5:46 AM
libGLESv2.dll
7.63MB
2.1.0.48aa52f7305a
1/30/2020 5:46 AM
libhttp_x64.dll
1.65MB
11.0.3.101
7/31/2020 11:32 AM
LocalPrtInfo.exe
1.77MB
11.0.3.603
4/29/2020 2:13 PM
LocalRequest.dll
214.58kB
11.0.3.972
6/8/2020 9:51 AM
log4net.dll
270.00kB
2.0.8.0
1/27/2020 2:17 PM
MBSDKService.dll
153.98kB
11.0.3.1464
8/31/2020 4:24 AM
MDMInstall.msi
17.41MB
-
9/22/2020 11:34 PM
Microsoft.Deployment.WindowsInstaller.dll
172.00kB
3.5.2430.0
9/21/2020 8:33 AM
Microsoft.IdentityModel.JsonWebTokens.dll
62.85kB
6.5.1.10424
4/24/2020 11:30 PM
Microsoft.IdentityModel.Logging.dll
24.35kB
6.5.1.10424
4/24/2020 11:31 PM
Microsoft.IdentityModel.Tokens.dll
838.37kB
6.5.1.10424
4/24/2020 11:34 PM
Microsoft.Web.Administration.dll
124.00kB
6.1.7600.16385
9/21/2020 8:33 AM
Mobile.WcfService.dll
51.71kB
11.0.3.1076
6/16/2020 3:54 PM
Mobile.WinUI.dll
475.90kB
11.0.3.1001
6/10/2020 11:10 AM
MoveAltCredentials.exe
61.31kB
11.0.3.487
3/27/2020 6:32 PM
Newtonsoft.Json.dll
508.00kB
7.0.1.18622
6/12/2020 4:25 PM
Ninject.dll
135.50kB
3.3.4.0
11/13/2017 2:01 AM
ntremoteexec.exe
162.66kB
11.0.3.101
7/31/2020 11:32 AM
Office365Util.dll
110.20kB
11.0.3.1538
9/9/2020 7:25 AM
openssl.exe
433.00kB
-
9/11/2020 1:41 PM
package.data.dll
125.73kB
11.0.3.1442
8/26/2020 7:28 PM
PanelManager.dll
400.13kB
11.0.3.1391
8/18/2020 1:38 PM
PatchApi.dll
40.60kB
11.0.3.490
3/30/2020 11:52 AM
PatchBiz.dll
1.83MB
11.0.3.1595
9/18/2020 6:03 AM
PatchManagement.dll
14.74MB
11.0.3.1600
9/18/2020 12:47 PM
pds2dis.dll
348.31kB
11.0.3.101
7/31/2020 11:32 AM
pds2dis.exe
119.27kB
11.0.3.101
7/31/2020 11:32 AM
pds2dis_x64.dll
456.23kB
11.0.3.101
7/31/2020 11:32 AM
pds2info.dll
343.74kB
11.0.3.101
7/31/2020 11:32 AM
pds2info_x64.dll
455.76kB
11.0.3.101
7/31/2020 11:32 AM
pds2lis.dll
324.10kB
11.0.3.101
7/31/2020 11:32 AM
pds2lis_x64.dll
428.52kB
11.0.3.101
7/31/2020 11:32 AM
PDS2Reg.dll
312.99kB
11.0.3.101
7/31/2020 11:32 AM
pds2reg_x64.dll
417.45kB
11.0.3.101
7/31/2020 11:32 AM
pedownloader.exe
443.16kB
11.0.3.986
6/9/2020 12:21 PM
PendingReboot.xml
764.00 B
-
8/31/2020 3:58 PM
PendingRebootPreview.xml
553.00 B
-
9/16/2020 5:53 PM
Pluralsight.Crypto.dll
39.50kB
1.1.0.0
9/21/2020 8:33 AM
PolicyData.dll
75.38kB
11.0.3.1548
9/9/2020 6:48 PM
PolicyTaskHandler.exe
41.07kB
11.0.3.1106
6/19/2020 6:52 PM
postcgi.exe
22.46kB
-
7/31/2020 11:32 AM
processrunner.dll
142.48kB
11.0.3.972
6/8/2020 9:50 AM
ProductProperties.xml
11.45kB
-
9/24/2020 9:19 AM
prov_loaddb.exe
24.85kB
11.0.3.1449
8/27/2020 5:08 PM
provclient.dll
276.18kB
11.0.3.1023
6/11/2020 3:57 PM
ProvisioningMaintenance.exe
22.92kB
11.0.3.514
4/21/2020 5:53 PM
provNTEventLog.dll
172.77kB
11.0.3.1578
9/15/2020 11:35 AM
proxyext.dll
138.95kB
11.0.3.101
7/31/2020 11:32 AM
proxyext_x64.dll
168.27kB
11.0.3.101
7/31/2020 11:32 AM
proxyhost.exe
1.91MB
11.0.3.101
7/31/2020 11:32 AM
proxyhost_x64.exe
2.40MB
11.0.3.101
7/31/2020 11:32 AM
PxeParser.dll
3.17MB
2.0.083
7/24/2020 4:52 PM
PXESvc.exe
3.32MB
11.0.3.978
6/8/2020 4:59 PM
rainstall.exe
347.24kB
11.0.3.101
7/31/2020 11:32 AM
RAXfer.dll
1.88MB
11.0.3.101
7/31/2020 11:32 AM
raxfer_x64.dll
2.35MB
11.0.3.101
7/31/2020 11:32 AM
RCBehavior_apply.dll
174.77kB
11.0.3.1274
7/23/2020 12:25 PM
RCBehaviorBiz.dll
44.60kB
11.0.3.1439
8/26/2020 3:59 PM
RCBehaviorUI.dll
201.48kB
11.0.3.1590
9/17/2020 2:48 PM
rckvm.exe
332.63kB
1.2.0.150
9/9/2020 7:35 PM
rckvm_x64.exe
446.16kB
1.2.0.150
9/9/2020 7:35 PM
RCService.exe
2.57MB
11.0.3.1614
9/22/2020 11:15 AM
RCService64.exe
3.29MB
11.0.3.1614
9/22/2020 11:15 AM
rcuser.exe
2.17MB
11.0.3.1589
9/17/2020 1:16 PM
RCViewer.exe
49.11MB
1.9.100.569121
9/21/2020 8:58 AM
remotecontrol.dll
49.07kB
11.0.3.530
4/22/2020 2:47 PM
RemoteControl.xml
616.00 B
-
8/31/2020 3:58 PM
RemoteControlPreview.xml
510.00 B
-
8/31/2020 3:58 PM
residentagent.exe
206.01kB
11.0.3.101
7/31/2020 11:32 AM
residentAgent_x64.exe
254.47kB
11.0.3.101
7/31/2020 11:32 AM
restartmon.exe
130.38kB
11.0.3.1283
7/29/2020 6:58 AM
RollingLog.dll
136.02kB
11.0.3.1402
8/20/2020 1:40 PM
RollingLog_x64.dll
171.27kB
11.0.3.1402
8/20/2020 1:40 PM
rollupcore_rptfiles.cab
915.60kB
-
8/27/2020 1:20 AM
rptfiles.cab
979.30kB
-
8/27/2020 1:20 AM
runasuserlibrary.dll
225.22kB
11.0.3.972
6/8/2020 9:50 AM
sdclient.exe
87.49kB
11.0.3.1337
8/7/2020 3:45 PM
sdclientlib.dll
916.73kB
11.0.3.1564
9/11/2020 7:00 PM
sdistps1.exe
334.63kB
11.0.3.1401
8/20/2020 12:33 PM
sdistscript.exe
289.75kB
11.0.3.972
6/8/2020 9:51 AM
SelfElectController.exe
2.02MB
11.0.3.1591
9/17/2020 3:32 PM
sendemail.exe
2.11MB
11.0.3.1353
8/12/2020 2:16 AM
sendsnmp.exe
280.71kB
11.0.3.1283
7/29/2020 7:00 AM
SendSyslog.exe
34.50kB
11.0.3.1295
7/30/2020 2:14 AM
ServerAuthentication.dll
45.03kB
11.0.3.772
5/18/2020 9:09 PM
ServerScanner.exe
315.49kB
11.0.3.972
6/8/2020 9:51 AM
servicehost.exe
1.77MB
11.0.3.101
7/31/2020 11:32 AM
servicehost_x64.exe
2.21MB
11.0.3.101
7/31/2020 11:32 AM
setup.exe
5.13MB
11.0.2.1
9/24/2020 9:07 AM
Setup10.exe
38.52MB
12.0.79
9/10/2020 2:11 PM
ShouldUseWindowsNotifications.xml
122.00 B
-
8/20/2020 12:45 PM
softmon.exe
778.54kB
11.0.3.1421
8/24/2020 11:20 AM
ssleay32.dll
267.00kB
1.0.2u
9/11/2020 1:41 PM
svccfg.exe
726.55kB
11.0.3.653
5/6/2020 5:24 PM
swdCoreCustomAction.exe
101.52kB
11.0.3.481
3/26/2020 1:50 PM
SWDDeferral.xml
369.00 B
-
9/1/2020 4:18 PM
SWDDeferralPreview.xml
485.00 B
-
8/31/2020 3:58 PM
SWDResult.xml
304.00 B
-
9/18/2020 5:04 PM
System.IdentityModel.Tokens.Jwt.dll
81.87kB
6.5.1.10424
4/24/2020 11:28 PM
SystemInterface.dll
40.00kB
1.0.0.0
9/21/2020 8:33 AM
SystemInterface.xml
299.97kB
-
9/21/2020 8:33 AM
SystemWrapper.dll
68.50kB
0.5.0.0
9/21/2020 8:33 AM
SystemWrapper.xml
221.08kB
-
9/21/2020 8:33 AM
Terminate.exe
189.41kB
11.0.3.1589
9/17/2020 1:18 PM
tmcdll.dll
1.13MB
11.0.3.1602
9/18/2020 2:55 PM
tmcsrvr.dll
132.45kB
11.0.3.786
5/19/2020 3:37 PM
tmcsvc.exe
359.84kB
11.0.3.1402
8/20/2020 1:39 PM
Trout.exe
30.50kB
11.0.3.576
4/27/2020 5:19 PM
tunnel.exe
2.47MB
1.2.0.150
9/23/2020 3:57 PM
TunnelManagerTest.exe
28.46kB
11.0.3.674
5/7/2020 6:57 PM
UserManagement.Business.dll
234.79kB
11.0.3.1192
7/10/2020 5:18 AM
UserManagement.Common.dll
54.21kB
11.0.3.1414
8/21/2020 3:27 PM
vulscan.dll
6.90MB
11.0.3.1421
8/24/2020 11:19 AM
wscfg32.exe
563.67kB
11.0.3.1589
9/17/2020 1:18 PM