.Loading..Loading.

Readme Rev

Service Updates

When the downloaded patch is run, it will extract to a folder and there will be zip files. Those files should be extracted and then Setup.exe can be run. This table outlines the names of the zip files and where they should be run.

ComponentCore/ConsoleClient

The following outlines instructions for installing this update.

This patch requires that Ivanti Endpoint Manager 2019.1 be installed. For more information about current service packs please see Ivanti Community Doc 1001

Installing on the Core and Rollup Core

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Prior to installing a patch on the Core Server it is recommended to make a backup of the Ivanti database.

Steps
  1. Disable any services on other machines that interact with the Core Server
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the Core patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required
  6. After applying the patch, you may need to re-activate your Core Server using the Core Server Activation Utility
  7. Restart any services stopped in Step 1

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Installing on Remote Consoles

A Remote Console is any machine that is not the Core Server and has the Ivanti Endpoint Manager Console installed. Console Machines need to be updated to be able to connect to the updated Core Server and Database.

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Steps
  1. Close the Console
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the appropriate patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Updating the Agent

The patch should be installed on the Core Server before updating Agents

Use one of the following methods to re-deploy the agent once the patch has been applied to the Core or to apply the patch manually.

Methods of agent deployment

  • Manual: Map a drive to \\Coreserver\ldlogon and run 'wscfg32.exe -f'
    This is used for single client installs and testing
  • Push: Schedule a push of the full agent
  • Self-Contained EXE: Create an EXE that can be installed
  • Advance Agent: This is a two stage process. The Advance Agent consists of a small MSI and a self-contained EXE. The MSI is deploy to the client and then the MSI downloads and installs the EXE. This allows for bandwidth friendly downloads.
For more information on agent configuration and deployment see Ivanti Community Doc 23482

Manual installation of the client patch

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

  1. Double-click on the self-extracting executable and extract it
  2. Extract the files for the appropriate patch
  3. From the extracted files, run Setup.exe
  4. When Setup completes, reboot the machine if a reboot is required.

Updating the Agent With Patch Manager

Ivanti Patch Manager can also be used to update agent machines with the patch. Content and definitions can be found in Patch Manager as Ivanti Updates and can be used to detect and repair agents that have not been updated. The Core Server must be updated with the Core patch before updating agents.

Not all Component Patches will have Patch Manager Content created. Once it is generally available, this method can be used to update agents. For more information about updating agents using Ivanti Patch Manager see Ivanti Community Doc 24384

Please review the following important information about this release BEFORE installing this update.

Feature Changes and Updates

The following features have been changed or updated

Agent Install

  • 602635 Added ability for Self Contained Agent MSI Installation Package
    • -

AntiVirus

  • 602215 Add new configuration settings in Ivanti Antivirus 2017
    • For more information see: About new features in Ivanti Antivirus 2017 introduced in SU2 for EPM 2019.1
  • 610891 [CrowdStrike] Security Activity Report
    • -
  • 629069 [CrowdStrike] Action Center Dialog 2019.1
    • -

Core Architecture

  • 576138 IIS Directory Browsing on /ldlogon, /upl, and /landesk disabled by default
    • -

Data Analytics

  • 627656 Walk the Mibs instead of all-or-nothing
    • -

Inventory

  • 628534 Create a serial number attribute that is always populated
    • -

Mac

  • Added Support for MacOS Catalina
    • -

MDM

  • 626486 Support automatic WiFi configuration in the Android Enterprise QR code for device enrollment
    • -
  • 632415 Enable Android Enterprise Zero-Touch enrollment
    • -

Patch Manager

  • Improvement: Complete redesign of the "Reported Patch" report, found under Patch and Compliance -> Reported Patch
    • The updated report is designed to show the status of the patches after they have been deployed successfully to endpoints.

Provisioning

  • 636128 New Bootix linux template UI and backend.
    • -

Remote Control

  • 606232 Update UI on core to support new security mode
    • -
  • 606233 Add NT Auth mode to websocket remote control
    • -
  • 610682 Launch remote control sessions in another tab
    • -

Software Distribution

  • 145783 Continue on Fail Option for Windows Actions Packages
    • -
  • 512095 Add the PowerShell module to the $PSModulePath
    • -
  • 642555 Able to use AWS S3 and Azure Blob storage as a shares for Software Distribution
    • -

Win Console

  • 627641 Manage S3 secrets and Azure Blob access keys in Credential Manager
    • -
  • 629294 Implemented What's new functionality
    • -

Defects Fixed

Agent

  • 508070 Agent configuration using alphabetical order setting in new agent creation as well as when rebuilding agents in certain situations.
    • Fixed new agent configurations to initialize using the correct (default) Remote Control agent settings.
  • 576386 TMCSVC Is unable to stop as expected, causing the agent install the fail
    • There was a possible deadlock that would keep the tmcsvc from shutting down, so the deadlock has been corrected. We also added some lines to the ntstacfg.in# file that would attempt to kill the service in case it gets hung.
  • 577477 Support new AC binaries and license
    • -
  • 600277 Proxyhost.exe stops talking to core server for 30 minutes
    • -
  • 640275 Addressed a security issue that could lead to clients validating the Core Server incorrectly
    • -
  • 645663 Advance agent deletes existing broker certificates
    • Modified cba8cleanup.exe to save and restore the broker.csr file. With this file missing on a reinstall, brokerconfig /n thinks the certificate is not present and deletes the existing certificate and gets a new one.
  • 647649 Addressed security issue that could allow local privilege elevation
    • Security enhancement to prevent permission elevation.
  • 647649 Added additional validation for any processes requesting elevation
    • -
  • 664649 fwregister.exe does not add MTFTP Windows Firewall exception for Win10 devices
    • Fixed issue related to fwregister not putting firewall exceptions for services like MTFTP that would start, but stop quickly due to no work to do or not being a CSEP elected device.
  • 674237 Standalone Agent Install executable does not request to elevate rights when launched
    • Fixed the Windows standalone agent installer to automatically attempt to run as administrator with elevated rights and hence prompt the user to elevate permissions.
  • 688543 NTStaCfg.in# is incorrect leading to missing tasks that lead to connectivity issues on the client
    • The exec strings in an ini section must be unique, and there was a duplicate exec number which caused the second entry to be ignored. We modified the code so there were no duplicates.
  • 699222 Log state causes crash in Proxyhost.exe when verifying PD signature
    • Proxyhost had a log statement around a files signature not being signed by the expected company.  In this case the log statement was not converting the standard string to a char pointer so it would cause a crash.
  • 713311 Ivappmonsvc.exe High Memory on Ivanti Cloud Agents
    • AppMon is utilizing high amounts of memory on computers with Ivanti Cloud Agent installed.

Agent Health

  • 576965 Agent health cannot repair remote control service on win10 device
    • Agent Health will fix RC if it's disabled in 2018.3 and 2019.1.
  • 603842 LDMS1100.BASEAGENTINSTALL fails to repair TMCSVC
    • Agent Health repairs tmcsvc service in 2018.3 SU and up.
  • 643443 Client registry key for ProductVersion = 11.0, not 11.0.x
    • Added a more detailed registry key on agents to better identify the product version (11.0.2 instead of 11.0).

Alerting

  • 268388 Unable to change actions or build new rulesets for core side alerts.
    • We are now allowing the user to change actions for core side alerts if he clones the original one that logs to the core.
  • 472144 cismbios.sys causing blue screen during windows 10 upgrade
    • On some Dell computers, the Realtime Inventory component may cause some blue screens.
  • 484809 Unable to interpret Alerts sent to Syslog Server
    • We have fixed the way we were parsing the information that was being sent to syslog server from EPM core.
  • 537561 Agent settings > Alerting > The default configuration cannot be deleted
    • The default alert settings can be deleted once another setting is created and set as default.
  • 538576 Core is not sending info about machine name to Syslog server
    • added client FQDN to syslog alert message
  • 572042 Core server is sending incorrect information about NIC configuration to the syslog server
    • We have fixed the way we were parsing the information that was being sent to syslog server from EPM core.
  • 603586 Alert Emails sent in TLS 1.0
    • Starting using openssl 1.1.1 for email alerts to negotiate TLS version with SMTP server.
  • 641161 When Real-Time Spyware blocking is enabled, softmon.exe causing BSOD in some situations
    • The Real-Time Spyware blocking feature in softmon may cause a registry hive corruption, causing a blue-screen (0x7F) on Windows 10.
  • 678010 Alert service crashing due to blank computer device ID in database
    • If by any means a computer device ID would end up being null in the database, the alert service will not crash.

AntiVirus

  • 353600 If AV2017 realtime scanning is disabled security scan will report it is disabled, re-enabling via task may not work
    • If Antivirus Real Time scanning is not running, it can be fixed with a repair task.
  • 353600 If the AV2017 realtime scanning is disabled, it's reported by a security scan, but repairing through a task won't work
    • If Antivirus Real Time scanning is not running, it can be fixed with a repair task.
  • 572578 AV-100 not detecting Bitdefender Antivirus
    • -
  • 576188 Agent configuration with option "exclude antivirus setup files" selected, the install fails at downloading
    • Deploying and agent configuration with the option to "exclude antivirus setup files" selected, fails to download antivirus setup files during installation.
  • 602215 Add new configuration settings in Ivanti Antivirus 2017
    • -
  • 605502 Add AV2017 json configuration on agent
    • -
  • 606834 Ivanti Antivirus 2017 update pattern files failed to get time
    • "Last update time" for Ivanti Antivirus 2017 may not be populated correctly.
  • 628468 Antivirus 2017 fails to install if remnants of the prior Ivanti Antivirus solution exists on the client
    • If the installation of the Ivanti Antivirus over the legacy version fail, it may cause any following attempts to fail too.
  • 631930 Security activity not populating with violations
    • Antivirus Security events don't appear in the security activity reports on the core.
  • 654168 LANDesk Management - Agent Settings - Ivanti Antivirus 2017 folder shows in Inventory tree even without it installed
    • Ivanti Antivirus 2017 folder is created in Inventory under LANDesk Management Agent settings in the EPM console for agents on which Ivanti Antivirus 2017 is not installed.
  • 668514 Crowdstrike integration is only showing 99 protected devices in Security Activity tool.
    • Limit of 100 CrowdStrike protected devices being shown in the Security activity report was removed.
  • 669568 Proxy settings do not come from EPM Management Console to Bitdefender Update server
    • In some cases, the configured proxy server is not used by the Antivirus Update Server.
  • 699067 Bitdefender Endpoint security from Gravity Zone is not detected after Inventory Scan
    • -

Broker Service

  • 588573 Posting core cert fails in 2019.1 when CSA cert only has a CN value
    • When checking for a name mismatch in the certificate of the remote computer, the code was including a comma after the computer name when comparing the string. This worked for most 3rd party certificates, but there are some that it did not. The fix was to only verify the computer name, without including the comma.

Cloud Services Appliance

  • 662731 BrokerServiceActivity.log is not getting controlled by MaxSize setting in BrokerServiceConfig.xml as it should.
    • Fixed an issue so that the BrokerServiceActivity.log log file is controlled by MaxSize setting in BrokerServiceConfig.xml as it should.

CSEP

  • 493656 CSEP- PXE Subnets Disabling at unknown intervals
    • Fixed an issue that could cause CSEP subnets disable at unknown intervals.
  • 585355 Agents are sending ARP traffic every 10 seconds
    • Agents no longer send ARP requests every 10 seconds.
  • 593812 CSEP Services may not get elected if Agent state is disabled.
    • Fixed CSEP continuing to run if agent state is disabled.

Data Analytics

  • 363125 Barcode merge service isn't merging devices correctly
    • Fixed the problem that merge is based on barcode scan type.
  • 519998 Discovery Services - SNMP Bits need an update
    • Upgrade Dart.Snmp.dll from 4.5.0.0 to 4.10.3.0 for better SNMP v3 support.
  • 620540 JPN-Help button does not work_Data Analytics_Data Translation Services
    • On a Japanese core, the Help button in Data Translation Services will now take you to the help documentation for DTS.
  • 628857 Database Doctor - Archive to Asset Control keys from DeviceID to select targets.
    • Changed Database Doctor's Archive Computer rule to use Computer ID when the user uses the "Archive Selected Devices" feature instead of Device ID.
  • 644110 Dell Warranty rule is giving 401 error
    • Due to the Revamp of the new Dell API, we've updated the Dell Warranty rule to accept a client id and client secret to receive information from dell. Please create a new Dell Warranty rule and supply your Client ID and Client Secret, and apply an appropri
  • 656509 Error when running WinMagic Import
    • The Datamart_DataProtect.xml file was changed to increase the size of the ProdVersion column in the DataProtClient database table.
  • 709912 2019.1 branch Column Size & Type are specified on the Windows Console(GUI) are not included in an actual database table.
    • When using nvarchar data types in the custom data forms the database will reflect the correct column size for the custom field.

Endpoint Security

  • 586159 CHS/CHT - Application control settings has no Save, Cancel button.
    • When editing the Endpoint Security / Application Control settings on a Chinese core, the buttons Save and Cancel were not visible.
  • 605026 "Scope" feature does not work in the [Security activity] window
    • Security Activity filter was changed to take into account the "Scope" option.
  • 609861 Allow only network un-isolation from trusted process
    • -
  • 619578 Network isolation may cause 100% cpu load if Privilege Management is deployed on the agent
    • Network isolation causes high CPU load if Privilege Management is deployed on the agent.
  • 620524 Network Isolation does not work if Appmon is running on an agent
    • If another firewall software is running on the same machine, it might prevent the network isolation to work correctly.
  • 631222 EPS and proxy host contacting the core ever 1 minute 5 seconds over port 9592
    • The Endpoint Security client was resolving the computer idn by contacting the core. It was causing high cpu usage on the core if too many devices was doing this at the same time.Now, the Endpoint Security client is using a value cached locally.
  • 636728 EPS general settings and Ivanti Firewall settings forms cover partially the buttons OK and Cancel at the bottom of the window
    • On Japanese version, the buttons at the bottom of the Endpoint Security settings form are partially covered, making difficult to validate the settings.
  • 656487 Incorrectly Blocking - An attempt to modify system startup
    • Some items reported to the core by EPS as "new startup module" are not shown anymore.
  • 669098 With EPS enabled updating Windows 10 from one version to another fails
    • Endpoint Security real-time file analysis may cause sharing issues with files located in C:\$WINDOWS.~BT\ preventing the Windows 10 upgrade to complete correctly.
  • 708988 Invalid Privilege Management configuration
    • Privilege Management configuration import may fail if it contains some Chinese characters.

Install

  • 654744 Core install fails During the installing identity server
    • Enabled the Installer to accommodate for RSA-CNG Certificates.
  • 657260 Tasks losing targets after 2019.1 upgrade from 2017.3.
    • When swdCoreCustomAction.exe was run to perform various task checks/upgrades for SWD, it was using the default mode of saving everything associated with each task. Some details with tasks require a console user to be logged in before those details can be
  • 663476 Errors during SU3 installation in step ProvLoadDBActionsAndSectionsCommand
    • The installer now runs in the language that the core was installed in, not the language configured in the system's regional settings.

Inventory

  • 440405 Inventory data for "Server Roles and Features" is garbled
    • Fixed issue where Server Roles and Features data in Inventory was being converted twice to UTF8 for transport. Now gathers it correctly and hence shows up in the EPM console correctly.
  • 487440 The primary owner is displayed with Asian characters on some devices
    • Run ldapwhoami.exe as logged in user. Make sure Unicode registry entry read in terminated with trialing two byte zero. Make ldapwhoami.exe fully Unicode compatible.
  • 492965 4100 on the fileconnectioninfo table
    • inventory service will now handle much larger attribute values. In this case it was 1.3 Mb.
  • 514609 Services (680) - Flush map file new.jfm shows up randomly in the Event Viewer
    • Fixed an issue where ESENT events showed up in the event log when the inventory scanner runs on the EPM core server.
  • 576923 BSOD on windows server 2008 R2 OS (cismbios.sys)
    • On some Dell computers, the Realtime Inventory component may cause some blue screens.
  • 600561 Full Name is mismatching in inventory for some devices
    • User data is now in sync even when we are unable to get some fields like "Full Name".
  • 600650 McAfee Anti-Virus 10.6 reports incorrectly to Inventory
    • McAfee Antivirus 10.6 will be shown in Inventory.
  • 635245 CoreDBUtil - Unhandeled Exception thrown in 2019.1
    • Applied fix so an unhandled exception does not occur.
  • 639910 Inventory OU output contains invalid characters
    • Made ldapwhoami.exe on AD side fully support Unicode. However on eDirectory side still use MBCS.
  • 657616 Inventory attribute information duplicated when creating a query using an English OS / English Remote Console connecting to a German Core Server
    • Fixed an issue where a non-English core would cause duplicate meta-data to appear if used with English remote consoles.
  • 665138 Agentless scanner not working 
    • A conflict with AGLSMonitor and our new code signing certificate was fixed.
  • 667222 Computer.Processor.Processor Count Not Accurate
    • The Windows inventory scanner was enhanced to report the following by retrieving the values from WMI:"Computer"."Processor"."Package Count""Computer"."Processor"."Package Cores"
  • 714218 DeviceID visible in database and in client registry are different for same device.
    • Fixed issue to avoid having duplicate sourceid's in the restoreids table in the SQL database which caused the loading of device ID's that needed to be restored to fail in the web service (ScanInstructions).
  • 716576 Errors in Event Viewer when inventory scan is ran
    • Fix for ESENT errors on Windows client machines in the event viewer when the inventory scanner runs.

Licensing

  • 692366 Product activation not working - Some network security appliances block IE traffic prior to version 11
    • Removed the "MSIE 6.0" header from the Activation HTTP request to avoid getting incorrectly blocked by some network security software.

Linux

  • 597567 Unable to push deploy Linux Agent
    • -
  • 650574 Unable to Push Linux Agent with Non-Root User
    • The linux agent prevents a two installations from running at the same time by placing a lock file in one of several directories (/var/lock, etc.)  The first directory that exists in the list is used, but an unprivileged user may not have permission to wri
  • 656499 Custom Scripts do not work with Linux clients after 2019 SU3
    • A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
  • 656500 SWD / Policies fail with 2019 SU3
    • A change in a soap message sent from the core to the linux agent exposed a defect where a buffer was overwritten before it was fully read.
  • 656501 Windows Console doesn’t allow for HTTPS-based Linux packages to be created.
    • Enable allowing HTTPS path for Linux.
  • 659767 Ubuntu Workstation /UI does not run scheduled inventory, vulscan, etc from the expected crontab
    • The script to configure the crontab was run with a flag to terminate the script in the event of an error to protect against writing a bad crontab entry.  When reading the current crontab, modifying, and rewriting it, a command returned a non-zero code and

Mac

  • 146189 Import DEP devices before enrollment
    • -
  • 467520 The UI for the "Install macOS" provisioning action incorrectly fails validation
    • The UI for the Install macOS provisioning actionincorrectly fails validation if the install agent option is unchecked, and the URL for the configuration file is not set.
  • 533672 Ivinstallmacos "escaped" characters and file names need to be removed/replaced
    • If links are copied into one of the text fields for the Install macOS provisioning action, and there are any HTTP URL encoded characters, they are decoded in order to make the validation tests in the User Interface work correctly. Previously if there were any encoded characters, such as a space, these would cause the validations to fail. This issue has now been fixed.
  • 541984 Portal Manager tasks disappear after the reboot when using LDAP targeting
    • -
  • 572580 LDVDETECT - Cannot return logic on file that does not exist
    • Files that are missing are now properly reported.
  • 574892 MDM Enroller app hangs on launching after installing profiles in large quantities/size
    • Large numbers/size of enrolling/onboarding profiles are now handled correctly when checking if a Mac is already enrolled into Ivanti MDM.The crash no longer occurs.
  • 593283 Mac Binaries may hang indefinitely
    • We found a race condition resulting from some changes to the Apple macOS APIs. We have changed the way we monitor calls to external applications such as system_profiler and ldiscan. This has fixed the problem.
  • 607110 macOS System Preferences restrictions are not correctly saved
    • The Mac profile for macOS Device configuration was not saved correctly if the profile contained settings for Restrictions payload. After save and reload, the restrictions settings for "Touch ID" and "Wallet & Apple Pay" check boxes were displayed incorrectly as 'Third-party Preferences Panes". In 2019.1 SU2 the settings are correctly displayed after save and reload the profile.
  • 608855 Change standard agent deployment to use ivagentcomplete.pkg
    • -
  • 628597 Provisioning does not restart when doing the OS and agent install
    • In macOS Catalina, the details of how user accounts are created when a device is re-imaged has changed. This was causing the script that was used to restart provisioning to execute when it could not successfully complete. The mechanism used to restart pro
  • 630023 Mac agent may not install via UDD
    • It's been resolved by updating the core code that installs the macOS agent in the UDD workflow.
  • 631097 Provisioning "Configure agent" action fails to install the EPM agent
    • Updated the Configure Agent macOS Provisioning handler to support the new monolithic macOS Agent installer
  • 635191 IVRemoteControl does not have full disk access on Catalina
    • "EPM Agent authorization" profile, which can deployed when macOS computers are enrolled in EPM MDM, now contains authorization for Ivanti remote control to allow full disk access, which includes browsing folders protected by the operating system and user
  • 636442 Unmodeled Device information error
    • Added modeled data for Mac monitors and macOS MDM information.
  • 638138 The Date on the Profiles in inventory is not correct
    • Fixed a problem parsing the profile installation dates where some installation dates could be dated incorrectly (depending on the week alignment in the year).
  • 642734 Manifest Distribution Package re-runs after running a Mobile Sync
    • This is a misconfiguration issue. It occurs when the manifest package fails to install an application with the bundle identifier specified in the Macintosh MDM Software Distribution properties. For deploying the macOS EPM agent, an appropriate bundle id w
  • 645714 Mac Agent Fails to Install in 2019.1 SU2 - Reports successful installation
    • Resolved by updating the core code that installs the macOS agent on the device in the UDD workflow.
  • 647095 VPP apps not installing
    • Resolved in 2019.1 SU3. VPP applications can be successfully deployed to Apple Devices via SWD
  • 650409 Mac agent inventory scanner errors with segmentation fault 11 when not connected to the network, but going through the CSA
    • The segmentation fault, due to a unexpected memory management issue, has been removed.Inventory scans now work as expected; both with and without the CSA.
  • 660088 CBA and "PDS2D" should pass the "Signed Software" Prerequisite for macOS Firewall
    • Code signature of the executables was fixed
  • 702856 Unable to remove VPP apps for iOS devices after they were installed
    • Managed apps, including VPP apps, are now removed from the device if the scheduled task no longer targets the device.For example the device is removed from the scheduled task or the scheduled task is removed.
  • 707189 LDAPM Segment Fault when going through CSA
    • ldapm was crashing when running through a CSA, when the device was joined to a domain. Running through the CSA meant that most likely the device would have to use cached domain info when asking the core to resolve group membership for the device. Accessing the cached data was causing an object to be freed when it should not have been. This issue has be fixed
  • 707651 Primary Owner field is missing in macOS inventory scans
    • Primary Owner information is now fetched by Mac OS Inventory scans.

MDM

  • 527414 Chromebook device discovery returns "Connection failed" when "Test Credentials" is clicked
    • Google APIs limit how long an external process can page through data. When the limit is exceeded, EPM shows a connection failure. Fixed by changing the logic to use an improved paging strategy that won't time out.
  • 527415 Unable to inventory large quantities of Chromebooks
    • Google APIs limit how long an external process can page through data. When the limit is exceeded, EPM shows a connection failure. Fixed by changing the logic to use an improved paging strategy that won't time out.
  • 543259 Relaunching VPP app package in EPM is missing app icon
    • In the EPM console, after an iOS VPP SWD package has been created for a specific app, and then closed and reopened, the icon next to the left of the app description now shows the correct app icon.
  • 606951 Android Enterprise: Administrator is not informed that they need to install an SSL certificate on the core
    • For Android Enterprise, the Administrator is now informed that they need to install an SSL certificate on the Core when enrolling an Enterprise.
  • 609362 In EPM console rename legacy "Android" to "Legacy Android"
    • -
  • 647681 Android 10 permissions are not always working as designed
    • Certain device permissions that were failing to be applied on Android 10 devices, now are being applied correctly.
  • 667979 Samsung Galaxy Note10 and S10 - Unable to deploy apps
    • Install of Android Entrprise applications may fail on Note 10 or Galaxy S10 devices.When trying to deploy Android Enterprise apps to Note10 devices or Galaxy S10, it fails. Task will fail with weird temp and cpu errors in mdm.dll.log (entries like "Inval
  • 669299 Unable to create Android Enterprise accounts on any core
    • The Android Enterprise creation process has been modified to no longer require Internet Explorer. Any browser will work and IE should be avoided.
  • 674660 MDM Service crashes on certain non-fatal errors
    • The MDM Management Service would sometimes crash due errors that were non-fatal exceptions.Adding additional Exception handling in the service solved this issue.
  • 677727 Co-management behavior for distributing MDM can be problematic
    • Adjusted wording for the co-management/agent automatic deployment over MDM so it is clear that the agent install process will occur upon next MDM sync for devices without the agent. Before it was worded that the process only would occur upon MDM enrollment.
  • 682821 In Android Entreprise mode, fully managed, it's possible to install apps with personal google account through public playstore
    • Added a checkbox to Android Restrictions policy called "Remove play store apps that are installed from personal accounts". The default is checked, but to not remove user's apps, uncheck and user-installed apps will remain on the device.
  • 684630 Users granted Modern Device Management rights unable to create/edit Mobility profiles
    • Fixed a logic error that was related to User's permissions on the machine. Users with Modern Device Management permissions should now be able to create/edit Mobility profiles.
  • 716474 Chromebooks fails to create inventory scans
    • The HwLastScanDate was not included in delta scans which sometimes causes that field to become NULL in the database. That caused a failure in processing chromebooks and some would not get processed. Fixed by adding HwLastScanDate to delta scans and also self-healed records that contained NULL for that field value.

Patch Manager

  • 454665 Compliance Group does not display patches assigned
    • Show Approved for scoped scan vulnerabilities in Compliance Group
  • 520878 Looking at the "History" of patches that have run, we're finding that clicking the '>' arrow to show the next page, actually goes to the next definition.
    • Now when the "< >" buttons are used, the form will cycle(reload) the next vulnerability from the list. This was the intended original behavior but the form's title was never loaded and this added to confusion to make something else from this functio
  • 521986 LDReboot continues to prompt for reboot immediately after being snoozed
    • Several logic and timing issues were corrected in LDReboot to make the snooze functionality more reliable.
  • 535670 Not able to uninstall Next Gen patches from Workstations if they have a duplicated Server Patch
    • Next-gen type vulnerabilities that contain duplicated patches (ex MS19-03-MR7-4489878_INTL) will be properly uninstalled if chosen so via uninstall task (where applicable, not all patches contain uninstall scripts).
  • 572108 Import CVEs progress window will do nothing if an empty CSV file is given
    • Importing an empty CSV file will yield a warning message and gracefully end the action
  • 586069 Invalid Input error when saving patch definition filter
    • Save button will be disabled and a note will notify the user why is disabled. Once the products load into the filters will reactivate the save button and clear the notification.
  • 593362 New Filter Definitions do not unselect Rollout Projects that have been added prior
    • We have fixed the rollout project selection in the patch filter definition.
  • 596983 Silent uninstall" column in "Security and Patch information" menu is always on "Yes" even if "Uninstall" column is on "No".
    • Silent uninstall column will now have its status updated accordingly based on the Uninstall column. For example if uninstallation is not possible then silent uninstallation will show the same thing. Was mostly a cosmetic issue.
  • 601869 Filter form no longer loads after deleting some filters with default generated name
    • Deleting filters created with auto-generated names will not break the future filters created with auto-generated names
  • 605611 Aggregate Good & Bad Reported Patches into one place
    • -
  • 606088 Unable to set up automatic definition download setting to move Office 365 definitions to custom filter during download
    • Creating a filter now for Click to Run product found while searching for Office, will properly group up all the office definitions 
  • 608044 Good apps not correctly reported in Patch Reporting by agent
    • Reported Patches Report Enhancements
  • 633066 Saving a new patch repair task for a patch group fails.
    • A repair task created from a custom group is possible again without any additional tinkering.
  • 657586 Correction of Japanese translation - Retain in client cache unless marked "Do not Scan" option
    • -
  • 660760 Can't deselect Office 365 download options
    • If the user selected any office 365 patch binaries to download via the custom interface, we added the possibility to opt out from this by deselecting the checkboxes
  • 675400 New Patch Task Template now requires you to select repair group in 2019.1 SU3
    • -
  • 718373 IVAppMonUI crashing
    • -

Provisioning

  • 456507 "Retry selected failed machines" also restarts pending and active devices in Provisioning Scheduled Task
    • If new machines were added to an existing task, and the "Retry selected failed machines" context menu was selected, all machines in the waiting state including the selected machines would restart the task. The base method for starting tasks on targeted machines was fixed to not allow this to happen. The scheduler was also updated to set the machine state appropriately.
  • 502505 Self-electing subnet service 'core unreachable' message
    • move the csep endpoints into a new app pool
  • 535529 Customize Mapped Software provisioning action fails in 64-bit UEFI WinPE
    • The problem cause by Microsoft Windows Form API. With high resolution monitor, form property AutoScaleMode set to Font or Dpi crash the app in Windoes PE. The fix is to set scale mode to none.
  • 575662 Maintenance task is not removing old devices when one of them is linked in Provisioning -> Machine Mapping
    • A database constraint prevented inventory records from being deleted if the machines were part of a machine mapping in Provisioning. Provisioning maintenance will now clean up machine mappings older than the number of days specified in the file prov_mapping.ini, located in the ManagementSuite folder. After this cleanup has occurred, inventory records will be deleted normally.
  • 616616 No option to interact with 64bit registry in the update registry provisioning action
    • The Registry action in Provisioning was enhanced to provide support for accessing the 64-bit view of the registry. Users must check the 64-bit view checkbox on the action properties to use this feature.
  • 656884 Provisioning tasks created with CreateProvisioningTask in MBSDK failing immediately after start
    • Fixed an issue where provisioning tasks created with the CreateProvisioningTask api fail immediately after being started.

Remote Control

  • 455713 HTML5 RC issue when using long password
    • Fixed an issue that would prevent HTML5 RC authentication when trying to use a long password.
  • 570043 RCViewer- Identity Server Failing due to outdated TPS.config
    • Fixed an issue with an invalid tps.config file after product installation.
  • 581023 Linux RC Tunnel Connection limitation
    • Fixed an issue that caused the Linux RC tunnel to limit the number of connections allowed.
  • 596271 Rcviewer duplicating devices due to devices in multiple scopes
    • Don't duplicate devices for each scope they are included in.
  • 600448 Tunnel Crashes with event message Event 1000
    • Fixed a memory leak in the RC tunnel that occurred when machines would register with the tunnel without cleaning up the original socket.
  • 605992 Failed to gather agent state information when user creates database with non-English language
    • Fix for agent state information to work with a non-english database
  • 606232 Update UI on core to support new security mode
    • -
  • 606233 Add NT Auth mode to websocket remote control
    • -
  • 610682 Launch remote control sessions in another tab
    • -
  • 611407 Agentless RC unable to File Transfer or Remote Execute
    • stand alone rc settings no longer use the registry
  • 630842 Multiple RCKVM.exe processes overwhelming machines with 2019.1 agent
    • Added functionality to prevent multiple rckvm.exe processes from spawning in certain situations.
  • 633092 RCViewer file transfer do not allow transfer to drives other than C
    • Fixed an issue that would allow file transfer to only browse the c drive.
  • 636152 Addressed a security concern that could lead to loading incorrect dlls
    • -
  • 645661 ENURCSETUP.exe error during install
    • Fixed the legacy viewer not installing from the web console. (rcSetup.exe)
  • 656994 Unable to inputting double-byte character set during the Remote Control WS session
    • The fix for this defect was implemented using the IME on the computer that executes RCViewer (i.e. the computer performing the remote control function). Because of the architecture of the Ivanti Remote Control Solution it is not possible at this time to implement an IME solution using the IME on the computer being remote controlled.
  • 664340 Remote Control Causing Excessive Calls to LDDWNLD
    • Fixed an issue that may cause remote control to cause excessive calls to the core if it is configured to use the RC Tunnel.
  • 674152 RCViewer uses computer short name when Web console is started with FQDN and RC doesn't work
    • The EPM Web Console can be launched using the EPM core's short computer name or its fully qualified domain name, i.e. https://mycomputer/remote https://mycomputer.mydomain.com/remotePreviously if the fully qualified domain name was used then 'Remote
  • 685206 Installation of enurcsetup.exe fails.
    • Fixed an issue that was preventing the updated legacy remote control viewer from being updated in the SU patch.
  • 692571 RCClient.exe remote control agent for CSA is failing - curllib.dll was not found
    • Fixed an issue with standalone legacy rcclient.exe not installing correctly due to missing curllib.dll.
  • 695671 LDWebApp pool to crash
    • Fixed a remote control issue when multiple remote control tunnels were used. The root cause was a threading issue in the Ivanti RemoteControlAuth web service. The crash of RemoteControlAuth also caused the LDWebApp IIS pool to fail.
  • 705536 Tunnel loses connectivity but does not unregister the device
    • Fixed an issue that could cause the Remote control tunnel to stop monitoring connected devices in some situations.  This would cause routers to potentially think the connection was inactive and kill the connection.

Reporting

  • 644413 Can not send report by email using SMTP port 587
    • -
  • 661872 "Export as csv" shows a wrong output when the query results are zero
    • Export to CSV from a query was fixed to write the proper results when a query returns no results.

Rollout Projects

  • 598388 Adding targets from query generates 'Object reference not set to an instance of an object'
    • For this feature to work, have to set vulneribility definition. Added Definitions and Patch list panels to patch task templates.

Rollup Core

  • 680387 Got an error messages during the rollup core installation process
    • Fixed an issue with the rollup core install.

Software Distribution

  • 145783 Continue on Fail Option for Windows Actions Packages
    • -
  • 489439 If PolicySync /enforce runs at reboot it may interfere with sdclient continue tasks.
    • Added new IN-REBOOT status to avoid PolicySync.exe /enforce re-run the same policy that is in the state of continuing after reboot.
  • 498545 Windows Actions - copy file list
    • Added option to copy lists of files to Windows Actions.
  • 512095 Add the PowerShell module to the $PSModulePath
    • -
  • 523782 SDClient.exe crashes during the attempt to uninstall MSI
    • When uninstall MSI package, it may only rely on product code and local path could be empty.
  • 527404 Folders are not visible when creating https distribution packages.
    • Fixed FileList function in Package class to better handle https
  • 530726 LDAPS environments may experience smart card authentication prompts when LDAPWhoAmI runs
    • Add choice of always use LDAPS, not use LDAPS and dynamic on not use LDPAS if detected that a smart card connected to the machine.
  • 575285 Scheduled tasks are very slow to load targets and information.
    • Add computer object required column to targeted device that inherited from computer to avoid access database for each device instead load up at beginning once.
  • 576134 SDClient or Vulscan may hang when starting to download files
    • Fixed path in code where it would keep trying to find a peer with a file so that it will give up after a few attempts.
  • 586213 Tmp tables could become orphaned in the database
    • This issue caused by SQL server fail to drop table. The cause of this failure may caused by table still in use, such as replication. The fix is using real temporary table name that is leading with # character so that in case the table cannot be dropped, SQL server will take care of it later.
  • 586844 Downloading a partial file is not resumed
    • Fixed the code to check for both types of hashes before it determines that the partial file is invalid. Before the fix it was only checking for md5 hashes which are no longer supported.
  • 598389 When creating and scheduling Windows Action Package with the Remote Windows Console it will fail with result code 16446
    • The Ivanti-PSModule PowerShell module used by Windows Actions wasn't available on the remote console, causing Windows Actions packages to be hashed incorrectly. It is now installed there by default.
  • 605119 Ivanti Powershell modules are not digitaly signed
    • We now sign the Ivanti-PSModule PowerShell module and all submodules.
  • 606182 Universal Provisioning Distribution Package fails to start when scheduled to a device (Push or Portal)
    • This happened because the software distribution business DLL is no longer installed in the WEB bin folder. Fix is to load it from the main product install location.
  • 608808 Open a Software Package is very slow. It takes 20 seconds or 2 min to open a Package.
    • For the case of opening a software distribution package, re-wrote the file location reducing code with a much faster algorithm. Also added a location cache for subsequent location accesses for either the primary package locations or the additional files locations. The location cache is automatically updated when new locations are added.
  • 613793 Addressed a security concern that could lead to loading incorrect dlls
    • -
  • 614299 Portal Manager Date format does not match location
    • An issue affecting the localization of the "Last Run" column in Portal Manager was corrected.
  • 641220 Giving a role the Edit permission under Software distribution -> Distribution packages allows them to MOVE packages/bundles from Public packages to My packages and make changes.
    • Fixed a permissions issue allowing a user with the Edit permission under Software distribution Distribution packages allowed them to move packages/bundles from Public packages to My packages and make changes. Now they can only be copied, instead of moved.
  • 662007 Problem when processing package bundles in which first bundle has a reboot action.
    • Fixed an issue to allow the first bundle in a SWD package bundle to have a reboot action.
  • 664396 schedpkgupdate.exe creating and not deleting large .tmp files
    • Added better error handling to ensure that the temp files are deleted if there is a problem creating the hash
  • 664661 Failed to get the MSI package GUID in SWD
    • Fixed an issue that prevents SWD from getting the GUIDs for MSI packages. TheUNC paths were being skipped on remote consoles. There was a misplaced check for being on the core. That check was removed.
  • 669748 schedpkgupdate.exe failing to hash large files
    • Enhanced file hashing to hash large file.
  • 672039 LDAP resolution over the CSA may fail
    • Take care that user is not in machine domain but is trusted by machine domain.
  • 686674 Package Bundle shows completed in console, although installation stopped in the middle of processing.
    • For Software Distribution, fixed an issue which was ignoring pending reboot for MSI 3010 return code.
  • 687545 Agent unable to download files with special characters "&" in the file name via http
    • Software Distribution now properly decodes file names with the '&' character when attempting to download via HTTP.
  • 710531 "Additional Files" section is missing from the "Managed Scripts - Create file deployment script" window.
    • Fixed an issue where the additional files window didn't show in the Managed scripts - New File Transfer Script dialog.

vPro

  • 652728 Intel KVM not working in Windows 10
    • Intel KVM is now working with Windows 10 in some environments. For customers who still can’t get KVM working, follow the instructions on https://forums.ivanti.com/s/article/Intel-KVM-not-working-in-Windows-10.

Web Console

  • 575611 Legacy Remote control via management gateway button does not work
    • Fixed an issue that prevent a legacy remote control session through the management gateway.
  • 682823 Addressed security issue that could allow SQL Injection
    • -
  • 682836 Addressed security issue that could remote code execution
    • -

Win Console

  • 528287 Wake On LAN port cannot changed
    • The Wake-On-LAN functionality for task scheduling was updated to use the port specified in Configure Services (stored in the KeyValue database table).
  • 581493 Right click may throw exception after copying software package or bundle
    • Right-clicking on the Scheduled Tasks will no longer produce errors in the console log after copying a Distribution Package.
  • 583303 User names that begin with the letter 'X' cause the web console to not function properly
    • escape '\' for user name use in .aspx page.
  • 603361 Install Date Column sorting incorrectly
    • The data type for certain types of columns was not being recognized properly at the right time. Code was added to make sure the right data type was being detected so that the comparison for the sort was working properly.
  • 618274 RBA Bug for Software Distribution Task
    • The query was not checking groups that the user belonged to. The query was updated to include any groups the user belongs to.
  • 618576 Windows start menu gets covered up by console
    • Fixed an issue that caused the windows console to cover the start menu when maximized.
  • 633700 Users are able to cut and delete without edit permission on agent settings
    • Fixed an issue that would not allow a user to copy agent settings when the user had edit rights.
  • 640822 Remove Unsupported Agent Configuration from EPM Console
    • Remove the HP ThinPro Linux configurations from the core as they are no longer supported.
  • 666544 DEU - Agents settings - "Device Control" - "Speichern", "Abbrechen", "Hilfe" buttons missing, visible only in half in "Ivanti Firewall"
    • Fix - German - Agent settings buttons are visible for Endpoint Security

XDD-UDD

  • 520012 XDD Exclusions go missing once Agentless Scanner scans the device
    • Agentless Scanning to ignore XDD exclusions

Known Issues

No Known Issues

Files in this patch

_cbadisc.dll
2.74MB
11.0.2.1727
9/9/2019 4:01 PM
ActiveNotifyer.exe
69.42kB
11.0.2.2549
5/4/2020 5:09 PM
AdaptiveSettingsBehavior_Apply.dll
120.84kB
11.0.2.2441
2/27/2020 2:40 PM
AdvanceAgent.exe
167.77kB
11.0.2.2108
11/14/2019 10:09 AM
AGLSManager.exe
1.41MB
11.0.2.2651
7/22/2020 11:06 AM
AGLSMonitor.exe
265.61kB
11.0.2.2446
3/3/2020 1:34 PM
alert.exe
310.49kB
11.0.2.85
6/8/2020 8:56 AM
alert_x64.exe
380.09kB
11.0.2.85
6/8/2020 8:56 AM
alertrender.exe
227.76kB
11.0.2.85
6/8/2020 8:56 AM
alertservice.exe
349.84kB
11.0.2.2476
4/6/2020 12:29 PM
AMHelper.exe
88.99kB
11.0.2.2502
4/28/2020 3:44 PM
amtmon.dll
499.23kB
11.0.2.1727
9/9/2019 4:00 PM
AMTProvMgr2.exe
2.27MB
11.0.2.2584
6/12/2020 11:20 AM
AMTsessionMgr.exe
129.46kB
11.0.2.1727
9/9/2019 4:00 PM
AMTUSBFile.exe
419.06kB
11.0.2.1727
9/9/2019 4:00 PM
antivirus8.cab
5.94MB
-
1/16/2020 9:47 AM
ApmService.dll
57.14kB
11.0.2.2596
7/2/2020 11:36 AM
AVBiz.dll
255.97kB
11.0.2.2621
7/14/2020 4:16 AM
AVDefPusher.exe
17.93kB
11.0.2.1766
9/16/2019 7:32 AM
avsetup.exe
1.38MB
11.0.2.1766
9/16/2019 7:33 AM
AVStandaloneBuilder.exe
15.40kB
11.0.2.1766
9/16/2019 7:32 AM
AVStandaloneSetupHeader.exe
218.30kB
11.0.2.1766
9/16/2019 7:33 AM
AVUI.dll
3.09MB
11.0.2.2538
5/1/2020 12:45 PM
AWSSDK.Core.dll
905.50kB
3.3.103.59
11/5/2019 9:23 AM
AWSSDK.S3.dll
623.00kB
3.3.106.1
11/5/2019 9:27 AM
BouncyCastle.Crypto.dll
2.13MB
1.8.15362.1
4/17/2019 7:25 PM
BrokerConfig.exe
1.41MB
11.0.2.2381
1/9/2020 12:37 PM
brokerservice.exe
2.14MB
11.0.2.2591
6/24/2020 1:13 PM
CaptureImageHandler.exe
394.23kB
11.0.2.1998
10/29/2019 10:16 PM
CaptureImageHandler_x64.exe
488.04kB
11.0.2.1998
10/29/2019 10:16 PM
cba8cleanup.exe
158.70kB
-
6/8/2020 8:56 AM
cba8inst.msi
6.48MB
-
6/8/2020 8:56 AM
CefSharp.BrowserSubprocess.Core.dll
1.17MB
79.1.360
2/10/2020 7:36 PM
CefSharp.BrowserSubprocess.exe
6.50kB
79.1.360.0
2/10/2020 7:36 PM
CefSharp.Core.dll
1.77MB
79.1.360
2/10/2020 7:36 PM
CefSharp.Core.xml
81.40kB
-
2/10/2020 7:36 PM
CefSharp.dll
214.50kB
79.1.360.0
2/10/2020 7:35 PM
CefSharp.WinForms.dll
28.00kB
79.1.360.0
2/10/2020 7:36 PM
CefSharp.WinForms.xml
45.97kB
-
2/10/2020 7:36 PM
CefSharp.xml
648.98kB
-
2/10/2020 7:35 PM
ChangeSettingsHandler.exe
434.09kB
11.0.2.2549
5/4/2020 5:09 PM
CheckCachedFiles.exe
71.04kB
11.0.2.1727
9/9/2019 4:00 PM
chrome_elf.dll
946.50kB
79.0.3945.130
1/30/2020 4:47 AM
ChromebookApiRequest.exe
13.91kB
11.0.2.1506
7/31/2019 9:18 AM
ClientConfig.dll
2.22MB
11.0.2.2085
11/11/2019 7:36 PM
ClientConfigBehavior_Apply.dll
209.62kB
11.0.2.2441
2/27/2020 2:40 PM
ClientConnectivityBehavior_apply.dll
475.44kB
11.0.2.2441
2/27/2020 2:40 PM
ClientDBUtil.exe
144.63kB
11.0.2.1727
9/9/2019 4:00 PM
ClientPackager.dll
53.10kB
11.0.2.2574
6/5/2020 12:39 PM
ClientSetupTaskHandler.dll
81.34kB
11.0.2.2034
11/5/2019 12:49 PM
Commands.xml
22.93kB
-
4/27/2020 10:33 AM
CommonAgentSettingsProvider.dll
56.24kB
11.0.2.1987
10/23/2019 12:54 PM
Console.exe
65.29kB
11.0.2.1672
8/21/2019 2:18 PM
console_rptfiles.cab
954.36kB
-
5/26/2020 7:57 AM
core.secure.dll
89.42kB
11.0.2.2447
3/3/2020 2:17 PM
CoreProfiler.exe
30.96kB
11.0.2.2617
7/13/2020 10:04 AM
coresigner.dll
1.26MB
-
6/8/2020 8:56 AM
coresigner_x64.dll
1.54MB
-
6/8/2020 8:56 AM
CPPRaxferWrapper.dll
107.34kB
11.0.2.1502
7/31/2019 2:03 AM
CreateLANDeskRights.exe
28.06kB
11.0.2.1604
8/14/2019 2:46 PM
CreateTunnelArchive.exe
15.45kB
11.0.2.1506
7/31/2019 9:18 AM
CSEPManager.dll
19.47kB
11.0.2.1803
9/20/2019 5:25 PM
custjob.exe
2.67MB
11.0.2.1727
9/9/2019 4:00 PM
CustomizeMappedSoftwareHandler.exe
57.33kB
11.0.2.1760
9/13/2019 11:35 AM
CustomizeMappedSoftwareHandler_x64.exe
57.33kB
11.0.2.1760
9/13/2019 11:35 AM
d3dcompiler_47.dll
4.14MB
10.0.17134.12 (WinBuild.160101.0800)
1/30/2020 2:03 AM
Datamart.xml
866.48kB
-
6/26/2020 3:50 PM
Datamart_DataProtect.xml
3.26kB
-
3/26/2020 3:34 PM
DatamartPM.xml
59.83kB
-
1/7/2020 2:26 AM
DBRollup.exe
2.17MB
11.0.2.2130
11/20/2019 5:24 AM
DeployImageHandler.exe
427.52kB
11.0.2.1998
10/29/2019 10:16 PM
DeployImageHandler_x64.exe
530.93kB
11.0.2.1998
10/29/2019 10:16 PM
DirectoryView.dll
178.40kB
11.0.2.1506
7/31/2019 9:18 AM
DistributionApi.dll
67.31kB
11.0.2.2479
4/7/2020 11:21 AM
dmrollup.dll
4.99MB
11.0.2.2130
11/20/2019 5:22 AM
enuRCSetup.exe
19.16MB
11.0.0.1
1/7/2020 3:04 AM
EnvironmentManagerConsole64.msi
51.18MB
-
5/1/2019 10:51 AM
EPSUI.exe
677.76kB
11.0.2.1506
7/31/2019 9:18 AM
exec.dll
159.70kB
11.0.2.85
6/8/2020 8:56 AM
exec_x64.dll
196.01kB
11.0.2.85
6/8/2020 8:56 AM
execviewer2.dll
185.44kB
11.0.2.2569
5/28/2020 12:14 PM
FileReplBiz.dll
69.81kB
11.0.2.2405
1/16/2020 9:06 AM
FileReplUI.dll
767.32kB
11.0.2.2394
1/13/2020 4:38 PM
filexfer.dll
194.01kB
11.0.2.85
6/8/2020 8:56 AM
filexfer_x64.dll
232.83kB
11.0.2.85
6/8/2020 8:56 AM
fwregister.exe
141.98kB
11.0.2.2577
6/10/2020 7:54 AM
gatewaybiz.dll
68.41kB
11.0.2.1506
7/31/2019 9:18 AM
gatewayui.dll
282.81kB
11.0.2.1506
7/31/2019 9:18 AM
GatherProducts.exe
304.51kB
11.0.2.1848
9/26/2019 4:39 PM
genkey.exe
1.28MB
11.0.2.85
6/8/2020 8:56 AM
GetBases.exe
76.49kB
11.0.2.2441
2/27/2020 2:38 PM
Google.Apis.Admin.Directory.directory_v1.dll
212.58kB
1.40.2.1505
7/27/2020 4:38 PM
Google.Apis.AndroidEnterprise.v1.dll
151.55kB
1.40.2.1635
7/27/2020 4:38 PM
Google.Apis.AndroidManagement.v1.dll
112.20kB
1.40.2.1630
7/27/2020 4:38 PM
Google.Apis.Auth.dll
120.27kB
1.40.2.0
7/27/2020 4:38 PM
Google.Apis.Core.dll
75.38kB
1.40.2.0
7/27/2020 4:38 PM
Google.Apis.Discovery.v1.dll
38.57kB
1.40.2.0
7/27/2020 4:38 PM
Google.Apis.dll
79.92kB
1.40.2.0
7/27/2020 4:38 PM
GoogleAndroidApiLib.dll
32.03kB
11.0.2.2502
4/28/2020 3:45 PM
GoogleApiCommon.dll
13.45kB
11.0.2.1506
7/31/2019 9:18 AM
GoogleApiFactories.dll
13.95kB
11.0.2.1506
7/31/2019 9:18 AM
GoogleAppsApiLib.dll
41.60kB
11.0.2.2651
7/22/2020 11:05 AM
HipsClientConfig.exe
781.16kB
11.0.2.1859
9/30/2019 10:29 AM
HPScanner.exe
246.55kB
11.0.2.1727
9/9/2019 4:00 PM
httpclient.exe
1.70MB
11.0.2.85
6/8/2020 8:56 AM
httpclient_x64.exe
2.13MB
11.0.2.85
6/8/2020 8:56 AM
httprequest.dll
1.68MB
11.0.2.1748
9/11/2019 2:39 PM
IdentityServer.msi
7.47MB
-
4/27/2020 10:33 AM
IdentityServerConfig.dll
21.03kB
11.0.2.1506
7/31/2019 9:18 AM
InstallCommon.Version.xml
86.00 B
-
4/17/2019 7:25 PM
Installer.exe
36.03kB
11.0.2.2651
7/22/2020 11:05 AM
installkey.exe
151.00kB
11.0.2.85
6/8/2020 8:56 AM
InventorySettingsBehavior_Apply.dll
257.04kB
11.0.2.2441
2/27/2020 2:39 PM
IpmiRedirectionService.exe
234.29kB
11.0.2.2525
4/30/2020 11:28 AM
isscert.dll
1.80MB
11.0.2.2575
6/8/2020 8:47 AM
issproxy.exe
1.81MB
11.0.2.2575
6/8/2020 8:45 AM
issuser.exe
4.35MB
11.0.2.2575
6/8/2020 8:45 AM
issview.dll
766.47kB
11.0.2.2569
5/28/2020 12:14 PM
Ivanti.ManagementSuite.CrowdStrikeConnector.dll
29.00kB
11.0.2.2459
3/23/2020 8:06 AM
Ivanti.ManagementSuite.Telemetry.dll
30.49kB
11.0.2.2471
4/2/2020 3:42 PM
KavClient.cab
289.30MB
-
1/16/2020 9:47 AM
KavConnector.cab
3.52MB
-
1/16/2020 9:47 AM
KavMacClient.cab
239.20MB
-
1/16/2020 9:48 AM
KVMLib.dll
855.30kB
7.0.0.80021
7/2/2020 11:44 AM
LANDesk.AgentConfig.ConfigWriter.dll
43.06kB
11.0.2.2450
3/9/2020 12:02 PM
LANDesk.AlertManager.Business.dll
117.66kB
11.0.2.2502
4/28/2020 3:46 PM
LANDesk.Common.RunMethod.exe
19.26kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.DataServices.dll
96.70kB
11.0.2.1118
4/17/2019 7:25 PM
LANDesk.DirMan.Interface.dll
21.43kB
11.0.2.2502
4/28/2020 3:46 PM
LANDesk.DrManAPI.dll
35.03kB
11.0.2.2502
4/28/2020 3:47 PM
LANDesk.Gateway.Agent.dll
22.93kB
11.0.2.2579
6/10/2020 2:01 PM
LANDesk.Install.Common.Actions.dll
68.18kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.Common.Business.dll
38.00kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.Common.dll
68.50kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.Common.View.dll
89.50kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.ConfigUtility.exe
27.30kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.LDMS.dll
1.67MB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.LDMS.View.dll
19.50kB
11.3.22.17
4/17/2019 7:25 PM
LANDesk.Install.Legacy.Actions.dll
10.00kB
11.3.22.17
4/17/2019 7:25 PM
LANDESK.LDCrypto.Facade.dll
35.53kB
11.0.2.2466
3/30/2020 11:31 AM
LANDesk.ManagementSuite.ClientConfigUI.dll
476.80kB
11.0.2.2590
6/18/2020 6:15 PM
LANDesk.ManagementSuite.CoreDbUtil.dll
121.70kB
11.0.2.2135
11/21/2019 2:48 PM
LANDesk.ManagementSuite.CredentialManagerBiz.dll
24.96kB
11.0.2.2233
12/15/2019 10:38 AM
LANDesk.Managementsuite.CredentialManagerUI.dll
151.55kB
11.0.2.2380
1/9/2020 11:48 AM
LANDesk.ManagementSuite.Data.dll
1.37MB
11.0.2.2448
3/4/2020 7:56 PM
LANDesk.ManagementSuite.Database.dll
182.23kB
11.0.2.2592
6/26/2020 3:33 PM
LANDesk.ManagementSuite.Diagnostics.dll
117.75kB
11.0.2.1776
9/16/2019 2:35 PM
LANDESK.ManagementSuite.GoogleAndroidClassLibrary.dll
22.92kB
11.0.2.2137
11/21/2019 9:28 PM
LANDESK.ManagementSuite.GoogleAppsClassLibrary.dll
21.53kB
11.0.2.1506
7/31/2019 9:18 AM
LANDesk.ManagementSuite.Licensing.Activation.dll
125.73kB
11.0.2.2617
7/13/2020 10:05 AM
LANDesk.ManagementSuite.Licensing.UsageService.exe
137.84kB
11.0.2.2617
7/13/2020 10:05 AM
LANDesk.ManagementSuite.RESTful.Resources.dll
100.23kB
11.0.2.1586
8/13/2019 10:50 AM
LANDesk.ManagementSuite.RESTful.Service.dll
256.43kB
11.0.2.2582
6/11/2020 5:01 PM
LANDesk.ManagementSuite.SelfElectionBiz.dll
66.40kB
11.0.2.1771
9/16/2019 11:46 AM
LANDesk.ManagementSuite.SmtpEmail.dll
24.85kB
11.0.2.2533
4/30/2020 3:38 PM
LANDesk.ManagementSuite.SoftwareDistribution.Business.dll
981.19kB
11.0.2.2616
7/13/2020 7:51 AM
LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
3.20MB
11.0.2.2651
7/22/2020 11:05 AM
LANDesk.ManagementSuite.WinConsole.dll
6.91MB
11.0.2.2651
7/22/2020 11:06 AM
LANdesk.ManagementSuite.WinConsole.Help.dll
61.17kB
11.0.2.2352
1/7/2020 4:51 AM
LANDesk.Provisioning.Business.dll
739.08kB
11.0.2.2651
7/22/2020 11:04 AM
LANDesk.Provisioning.Plugin_CreateDirectory.dll
23.42kB
11.0.2.2134
11/21/2019 9:48 AM
LANDesk.Provisioning.WinUI.dll
3.14MB
11.0.2.2417
1/28/2020 10:18 AM
LANDesk.ReportingServices.Publisher.dll
28.96kB
11.0.2.2533
4/30/2020 3:38 PM
LANDesk.Scheduler.TaskHandler.dll
341.31kB
11.0.2.2558
5/15/2020 11:46 AM
LANDesk.Scheduler.WOL.TaskHandler.dll
36.96kB
11.0.2.2010
11/1/2019 2:34 PM
LANDesk.ServerManager.Business.dll
149.55kB
11.0.2.1506
7/31/2019 9:18 AM
LANDesk.ServerManager.Data.dll
84.98kB
11.0.2.1506
7/31/2019 9:18 AM
LANDesk.ServerManager.UI.dll
133.80kB
11.0.2.2476
4/6/2020 12:28 PM
LANDesk.Shared.RAXfer.dll
32.93kB
11.0.2.85
6/8/2020 8:56 AM
LANDesk.WebConsole.Common.dll
64.81kB
11.0.2.1502
7/31/2019 2:03 AM
LANDesk.Wizard.MDMSetup.dll
13.41kB
11.0.2.1506
7/31/2019 9:18 AM
LANDeskLaunchpadDLL.dll
1.05MB
11.0.2.2011
11/1/2019 3:29 PM
LANDeskTaskHistoryDLL.dll
203.01kB
11.0.2.2011
11/1/2019 3:29 PM
LaunchLdprovisionAsUser.exe
176.34kB
11.0.2.2549
5/4/2020 5:09 PM
LaunchLdprovisionAsUser_x64.exe
76.52kB
11.0.2.2549
5/4/2020 5:09 PM
LaunchPad.Link.WebUI.Business.dll
21.89kB
11.0.2.2502
4/28/2020 3:46 PM
LaunchPad.Link.WebUI.dll
61.17kB
11.0.2.2502
4/28/2020 3:46 PM
LaunchProcessAsUser.exe
175.34kB
11.0.2.2549
5/4/2020 5:09 PM
Lclxclnt.dll
1.30MB
11.0.2.2590
6/18/2020 6:17 PM
ldapinfo.dll
263.14kB
11.0.2.2596
7/2/2020 11:35 AM
LDApplications.exe
359.91kB
11.0.2.2352
1/7/2020 4:51 AM
LDAppSearchData.dll
17.49kB
11.0.2.1529
8/5/2019 9:26 AM
ldapwhoami.exe
182.41kB
11.0.2.2549
5/4/2020 5:10 PM
LDAV.exe
45.21kB
11.0.2.2657
7/23/2020 8:37 AM
LDAV64.exe
48.28kB
11.0.2.2657
7/23/2020 8:37 AM
LDAVBD.dll
460.33kB
11.0.2.2657
7/23/2020 8:37 AM
LDAVBD64.dll
538.53kB
11.0.2.2657
7/23/2020 8:37 AM
ldavhlpr.dll
957.16kB
11.0.2.2576
6/8/2020 11:17 PM
LDAVKES.dll
1,021.18kB
11.0.2.2441
2/27/2020 2:39 PM
ldcache.dll
1.07MB
11.0.2.2438
2/24/2020 11:55 AM
lddwnld.dll
1.43MB
11.0.2.2318
1/3/2020 11:25 AM
lddwnld_x64.dll
1.90MB
11.0.2.1677
8/22/2019 12:36 AM
lddwnldClassLib.dll
155.66kB
11.0.2.2378
1/9/2020 7:30 AM
ldheader.exe
183.87kB
11.0.2.2574
6/5/2020 12:38 PM
ldheaderRC.exe
185.37kB
11.0.2.2574
6/5/2020 12:38 PM
ldHpCommon.dll
906.20kB
11.0.2.2381
1/9/2020 12:37 PM
ldHpMgr.exe
192.02kB
11.0.2.1727
9/9/2019 4:00 PM
ldHpPos.exe
406.95kB
11.0.2.1727
9/9/2019 4:00 PM
LDInv32.exe
7.75MB
11.0.2.2605
7/7/2020 4:31 PM
LDInvHandler.dll
19.38kB
11.0.2.2370
1/8/2020 7:44 AM
LDInvHandlerData.dll
13.81kB
11.0.2.2361
1/7/2020 2:47 PM
ldiscn32.exe
3.68MB
11.0.2.2661
7/27/2020 4:40 PM
ldlocalprt.exe
388.20kB
11.0.2.2525
4/30/2020 11:29 AM
ldmemory.exe
441.20kB
11.0.2.1727
9/9/2019 4:00 PM
ldpgp.exe
1.38MB
11.0.2.85
6/8/2020 8:56 AM
ldping.dll
148.63kB
11.0.2.85
6/8/2020 8:56 AM
ldping_x64.dll
174.84kB
11.0.2.85
6/8/2020 8:56 AM
LDPowerSupply.exe
374.63kB
11.0.2.1502
7/31/2019 2:03 AM
LDProfile.exe
657.63kB
11.0.2.1727
9/9/2019 4:00 PM
ldPropertySheet.dll
77.31kB
11.0.2.2451
3/9/2020 11:20 PM
ldProvision.exe
651.98kB
11.0.2.2549
5/4/2020 5:10 PM
ldProvision_x64.exe
838.63kB
11.0.2.2549
5/4/2020 5:09 PM
LDProvisionSecureErase.exe
118.84kB
11.0.2.2381
1/9/2020 12:38 PM
ldReboot.exe
3.60MB
11.0.2.2593
6/29/2020 11:32 AM
LDSecSvc.exe
2.09MB
11.0.2.2657
7/23/2020 8:36 AM
LDSecSvc64.exe
2.81MB
11.0.2.2657
7/23/2020 8:36 AM
LDServerRoles.exe
19.89kB
11.0.2.2562
5/18/2020 8:05 AM
LDSetTPM.exe
32.69kB
11.0.2.1727
9/9/2019 4:01 PM
LDSystemEventCapture.dll
2.02MB
11.0.2.2441
2/27/2020 2:38 PM
libcef.dll
111.45MB
79.1.36+g90301bd+chromium-79.0.3945.130
1/30/2020 5:55 AM
libEGL.dll
365.00kB
2.1.0.48aa52f7305a
1/30/2020 4:46 AM
libGLESv2.dll
7.63MB
2.1.0.48aa52f7305a
1/30/2020 4:46 AM
libhttp.dll
1.35MB
11.0.2.85
7/27/2020 4:39 PM
libhttp_x64.dll
1.64MB
11.0.2.85
6/8/2020 8:56 AM
LocalPrtInfo.exe
1.87MB
11.0.2.2525
4/30/2020 11:28 AM
LocalRequest.dll
213.65kB
11.0.2.2549
5/4/2020 5:09 PM
localsch.exe
374.07kB
11.0.2.1727
9/9/2019 4:00 PM
MBSDKService.dll
153.98kB
11.0.2.2616
7/13/2020 7:51 AM
MDMInstall.msi
17.39MB
-
7/23/2020 8:46 AM
Microsoft.Azure.KeyVault.Core.dll
13.16kB
1.0.0.0
12/11/2019 3:55 PM
Microsoft.Azure.Storage.Blob.dll
406.07kB
11.1.1
12/11/2019 3:55 PM
Microsoft.Azure.Storage.Common.dll
352.07kB
11.1.1.0
12/11/2019 3:55 PM
Microsoft.Deployment.WindowsInstaller.dll
172.00kB
3.5.2430.0
4/17/2019 7:25 PM
Microsoft.IdentityModel.JsonWebTokens.dll
62.85kB
6.5.1.10424
4/24/2020 10:30 PM
Microsoft.IdentityModel.Logging.dll
24.35kB
6.5.1.10424
4/24/2020 10:31 PM
Microsoft.IdentityModel.Tokens.dll
838.37kB
6.5.1.10424
4/24/2020 10:34 PM
Microsoft.Web.Administration.dll
124.00kB
6.1.7600.16385
4/17/2019 7:25 PM
Microsoft.WindowsAPICodePack.dll
103.50kB
1.1.0.0
7/29/2019 5:54 AM
Microsoft.WindowsAPICodePack.Shell.dll
530.00kB
1.1.0.0
7/29/2019 5:54 AM
miniscan.exe
183.45kB
11.0.2.1727
9/9/2019 4:00 PM
Mobile.WcfService.dll
51.71kB
11.0.2.2651
7/22/2020 11:04 AM
ModernAppInfo.dll
81.57kB
11.0.2.1766
9/16/2019 7:33 AM
MstHelper.dll
57.70kB
11.0.2.2360
1/7/2020 1:51 PM
ntremoteexec.exe
160.70kB
11.0.2.85
6/8/2020 8:56 AM
Office365Util.dll
82.45kB
11.0.2.2605
7/7/2020 4:31 PM
OpenFirewallPorts.exe
213.20kB
11.0.2.1727
9/9/2019 4:01 PM
OSD.WinUI.dll
549.42kB
11.0.2.1948
10/14/2019 1:29 PM
OtherSecurityBehavior_apply.dll
215.15kB
11.0.2.2441
2/27/2020 2:40 PM
package.data.dll
125.73kB
11.0.2.2352
1/7/2020 4:50 AM
PanelManager.dll
392.05kB
11.0.2.2651
7/22/2020 11:05 AM
PatchApi.dll
40.69kB
11.0.2.1766
9/16/2019 7:33 AM
PatchBiz.dll
1.82MB
11.0.2.2651
7/22/2020 11:06 AM
PatchManagement.dll
14.62MB
11.0.2.2651
7/22/2020 11:06 AM
PatchManagementTaskHandler.dll
24.93kB
11.0.2.1766
9/16/2019 7:34 AM
pds2dis.dll
338.20kB
11.0.2.85
6/8/2020 8:56 AM
pds2dis.exe
114.73kB
11.0.2.85
6/8/2020 8:56 AM
pds2dis_x64.dll
422.98kB
11.0.2.85
6/8/2020 8:56 AM
pds2info.dll
322.10kB
11.0.2.85
6/8/2020 8:56 AM
pds2info_x64.dll
403.30kB
11.0.2.85
6/8/2020 8:56 AM
pds2lis.dll
301.92kB
11.0.2.85
6/8/2020 8:56 AM
pds2lis_x64.dll
377.59kB
11.0.2.85
6/8/2020 8:56 AM
PDS2Reg.dll
293.35kB
11.0.2.85
6/8/2020 8:56 AM
pds2reg_x64.dll
367.98kB
11.0.2.85
6/8/2020 8:56 AM
pedownloader.exe
453.76kB
11.0.2.2272
12/19/2019 6:40 AM
PlatformSettingsBehavior_Apply.dll
292.85kB
11.0.2.2441
2/27/2020 2:40 PM
Pluralsight.Crypto.dll
39.50kB
1.1.0.0
4/17/2019 7:25 PM
PolicyData.dll
75.38kB
11.0.2.2605
7/7/2020 4:31 PM
PolicySync.exe
94.55kB
11.0.2.2358
1/7/2020 10:29 AM
PortalManagerBehavior_apply.dll
225.29kB
11.0.2.2441
2/27/2020 2:40 PM
postcgi.exe
23.00kB
-
6/8/2020 8:56 AM
ProductProperties.xml
14.38kB
-
4/27/2020 10:33 AM
prov_loaddb.exe
24.84kB
11.0.2.2134
11/21/2019 9:48 AM
ProvisionHandlerLibrary.dll
21.01kB
11.0.2.1760
9/13/2019 11:36 AM
ProvisioningMaintenance.exe
22.92kB
11.0.2.2502
4/28/2020 3:46 PM
ProvisioningWebService.dll
45.03kB
11.0.2.2134
11/21/2019 9:48 AM
proxyext.dll
136.48kB
11.0.2.85
6/8/2020 8:56 AM
proxyext_x64.dll
162.73kB
11.0.2.85
6/8/2020 8:56 AM
proxyhost.exe
2.01MB
11.0.2.85
6/8/2020 8:56 AM
proxyhost_x64.exe
2.56MB
11.0.2.85
6/8/2020 8:56 AM
purgefile.exe
167.34kB
11.0.2.1727
9/9/2019 4:01 PM
PWMBehavior_Apply.dll
287.28kB
11.0.2.2441
2/27/2020 2:40 PM
PXEApi.dll
273.73kB
11.0.2.1727
9/9/2019 4:01 PM
PxeParser.dll
3.25MB
2.0.083
11/21/2019 4:24 PM
PXESvc.exe
3.43MB
11.0.2.2577
6/10/2020 7:57 AM
rainstall.exe
335.70kB
11.0.2.85
6/8/2020 8:56 AM
RAXfer.dll
1.87MB
11.0.2.85
6/8/2020 8:56 AM
raxfer_x64.dll
2.33MB
11.0.2.85
6/8/2020 8:56 AM
RCBehavior_apply.dll
171.30kB
11.0.2.2441
2/27/2020 2:38 PM
RCBehaviorUI.dll
180.80kB
11.0.2.1956
10/15/2019 1:55 PM
rcgui.exe
461.83kB
11.0.2.2181
12/4/2019 9:51 AM
rckvm.exe
332.63kB
1.2.0.105
12/4/2019 9:51 AM
rckvm_x64.exe
446.15kB
1.2.0.105
12/4/2019 9:51 AM
RCService.exe
2.58MB
11.0.2.2471
4/2/2020 3:43 PM
RCService64.exe
3.35MB
11.0.2.2471
4/2/2020 3:43 PM
rcuser.exe
2.16MB
11.0.2.1506
7/31/2019 9:18 AM
RCViewer.exe
49.11MB
1.9.90.529473
7/20/2020 11:37 AM
RegUpdateHandler.exe
370.02kB
11.0.2.1998
10/29/2019 10:16 PM
RegUpdateHandler_x64.exe
461.33kB
11.0.2.2390
1/13/2020 9:34 AM
remotecontrol.dll
49.07kB
11.0.2.2480
4/7/2020 10:01 PM
residentagent.exe
203.55kB
11.0.2.85
6/8/2020 8:56 AM
residentAgent_x64.exe
251.97kB
11.0.2.85
6/8/2020 8:56 AM
RollingLog.dll
136.10kB
11.0.2.1727
9/9/2019 4:00 PM
rollupcore_rptfiles.cab
915.60kB
-
5/26/2020 7:57 AM
rptfiles.cab
979.31kB
-
5/26/2020 7:57 AM
runasuserlibrary.dll
219.23kB
11.0.2.1727
9/9/2019 4:00 PM
ScanInstructions.dll
20.97kB
11.0.2.1810
9/23/2019 12:09 PM
ScanInstructionsBusiness.dll
17.45kB
11.0.2.1506
7/31/2019 9:18 AM
ScanInstructionsData.dll
20.49kB
11.0.2.1506
7/31/2019 9:18 AM
schedsvc.exe
301.46kB
11.0.2.2381
1/9/2020 12:36 PM
SchedulerSettingsBehavior_Apply.dll
182.41kB
11.0.2.2441
2/27/2020 2:39 PM
schedwol.exe
299.01kB
11.0.2.1727
9/9/2019 4:01 PM
sdclientlib.dll
856.77kB
11.0.2.2605
7/7/2020 4:30 PM
sdistps1.exe
333.20kB
11.0.2.2549
5/4/2020 5:09 PM
sdistscript.exe
286.28kB
11.0.2.2549
5/4/2020 5:09 PM
SelfElect.dll
612.05kB
11.0.2.2318
1/3/2020 11:25 AM
SelfElectController.exe
533.43kB
11.0.2.2089
11/12/2019 10:13 AM
sendemail.exe
2.09MB
11.0.2.1928
10/10/2019 9:31 AM
SendSyslog.exe
34.50kB
11.0.2.2352
1/7/2020 4:51 AM
sendtaskstatus.exe
139.06kB
11.0.2.1727
9/9/2019 4:01 PM
ServerAuthentication.dll
41.00kB
11.0.2.2219
12/12/2019 6:13 AM
ServerScanner.exe
311.99kB
11.0.2.2549
5/4/2020 5:10 PM
servicehost.exe
1.77MB
11.0.2.85
6/8/2020 8:56 AM
servicehost_x64.exe
2.19MB
11.0.2.85
6/8/2020 8:56 AM
setup.exe
5.13MB
11.0.2.1
7/27/2020 5:09 PM
Setup.exe
198.30kB
11.3.22.17
4/17/2019 7:25 PM
Setup10.exe
38.53MB
11.0.1670
7/20/2020 3:37 PM
SimpleMsi.dll
49.06kB
11.0.2.2438
2/24/2020 11:54 AM
softmon.exe
798.75kB
11.0.2.2549
5/4/2020 5:10 PM
SoftmonFIG.exe
51.36kB
11.0.2.1848
9/26/2019 4:38 PM
svccfg.exe
794.71kB
11.0.2.2381
1/9/2020 12:37 PM
SWD.Package.AndroidEnterpriseManaged.xml
859.00 B
-
8/5/2019 8:46 AM
SWD.Package.AndroidEnterprisePlay.xml
853.00 B
-
8/5/2019 8:46 AM
SWD.Package.Mobile.xml
1.81kB
-
7/13/2019 2:40 AM
SWD.Package.WindowsActions.xml
2.24kB
-
7/29/2019 5:47 AM
swdCoreCustomAction.exe
101.52kB
11.0.2.2460
3/26/2020 12:12 PM
System.IdentityModel.Tokens.Jwt.dll
81.87kB
6.5.1.10424
4/24/2020 10:28 PM
SystemInterface.dll
40.00kB
1.0.0.0
4/17/2019 7:25 PM
SystemInterface.xml
299.97kB
-
4/17/2019 7:25 PM
SystemWrapper.dll
68.50kB
0.5.0.0
4/17/2019 7:25 PM
SystemWrapper.xml
221.08kB
-
4/17/2019 7:25 PM
Task.PatchRepairTemplate.xml
2.16kB
-
9/6/2019 3:21 PM
TaskHandlerProxy.exe
22.42kB
11.0.2.1984
10/21/2019 4:57 PM
template_ExeContainedMsi32Bit.msi
36.00kB
-
1/10/2020 11:33 AM
tmcdll.dll
3.12MB
11.0.2.2318
1/3/2020 11:26 AM
tmcdll_x64.dll
3.55MB
11.0.2.1677
8/22/2019 12:35 AM
tmcsvc.exe
349.80kB
11.0.2.2318
1/3/2020 11:26 AM
tunnel.exe
2.47MB
1.2.0.105
7/27/2020 4:40 PM
TunnelManagerTest.exe
29.50kB
11.0.2.2424
2/3/2020 9:35 AM
UninstallWinClient.exe
278.85kB
11.0.2.1506
7/31/2019 9:18 AM
UpdatePXEBootImages.exe
181.98kB
11.0.2.1727
9/9/2019 4:01 PM
VAMiner.exe
33.01kB
11.0.2.1766
9/16/2019 7:34 AM
VariablesBehavior_Apply.dll
46.24kB
11.0.2.2441
2/27/2020 2:40 PM
vc_redist.x64.exe
14.38MB
14.22.27821.0
9/20/2019 9:50 AM
vc_redist.x86.exe
13.71MB
14.22.27821.0
9/20/2019 9:50 AM
vulscan.dll
6.77MB
11.0.2.2549
5/4/2020 5:10 PM
vulScan.exe
158.24kB
11.0.2.1766
9/16/2019 7:34 AM
VulScanService.exe
28.97kB
11.0.2.1766
9/16/2019 7:34 AM
WindowsMDMConfigurationBehavior_Apply.dll
46.24kB
11.0.2.2441
2/27/2020 2:38 PM
wscfg32.exe
534.50kB
11.0.2.2432
2/10/2020 1:53 AM
WSVulnerabilityCore.dll
77.31kB
11.0.2.2022
11/5/2019 1:12 AM