.Loading..Loading.

Readme Rev

EXCEPT AS RESTRICTED BY LAW, THE SOFTWARE PROGRAMS CONTAINED IN THE PATCH ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, TITLE OR FITNESS FOR A PARTICULAR purposE.

Service Updates

When the downloaded patch is run, it will extract to a folder and there will be zip files. Those files should be extracted and then Setup.exe can be run. This table outlines the names of the zip files and where they should be run.

ComponentCore/ConsoleClient

Installation Instructions

The following outlines instructions for installing this update.

This patch requires that Ivanti Endpoint Manager 2018.3 be installed. For more information about current service packs please see Ivanti Community Doc 1001

Installing on the Core and Rollup Core

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Prior to installing a patch on the Core Server it is recommended to make a backup of the Ivanti database.

Steps
  1. Disable any services on other machines that interact with the Core Server
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the Core patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required
  6. After applying the patch, you may need to re-activate your Core Server using the Core Server Activation Utility
  7. Restart any services stopped in Step 1

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Installing on Remote Consoles

A Remote Console is any machine that is not the Core Server and has the Ivanti Endpoint Manager Console installed. Console Machines need to be updated to be able to connect to the updated Core Server and Database.

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Steps
  1. Close the Console
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the appropriate patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Updating the Agent

The patch should be installed on the Core Server before updating Agents

Use one of the following methods to re-deploy the agent once the patch has been applied to the Core or to apply the patch manually.

Methods of agent deployment

  • Manual: Map a drive to \\Coreserver\ldlogon and run 'wscfg32.exe -f'
    This is used for single client installs and testing
  • Push: Schedule a push of the full agent
  • Self-Contained EXE: Create an EXE that can be installed
  • Advance Agent: This is a two stage process. The Advance Agent consists of a small MSI and a self-contained EXE. The MSI is deploy to the client and then the MSI downloads and installs the EXE. This allows for bandwidth friendly downloads.
For more information on agent configuration and deployment see Ivanti Community Doc 23482

Manual installation of the client patch

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

  1. Double-click on the self-extracting executable and extract it
  2. Extract the files for the appropriate patch
  3. From the extracted files, run Setup.exe
  4. When Setup completes, reboot the machine if a reboot is required.

Updating the Agent With Patch Manager

Ivanti Patch Manager can also be used to update agent machines with the patch. Content and definitions can be found in Patch Manager as Ivanti Updates and can be used to detect and repair agents that have not been updated. The Core Server must be updated with the Core patch before updating agents.

Not all Component Patches will have Patch Manager Content created. Once it is generally available, this method can be used to update agents. For more information about updating agents using Ivanti Patch Manager see Ivanti Community Doc 24384

Release Information

Please review the following important information about this release BEFORE installing this update.

Feature Changes and Updates

The following features have been changed or updated

Provisioning

  • 637569 Bootix Linux Support
    • -

Defects Fixed

Agent

  • 468601 Multicast should use point to point udp messages for sending out client public key
    • Because of situations where the multicast service could send out lots of packets on the multicast channel, we modified the code to not reply to cert requests on the multicast channel but reply using point to point udp. Also, modified so that messages that were being seen a lot in network traces would be limited to one message per time period.
  • 473782 Agent install issue on machines with existing agent with certain conditions
    • Modified the patch install script to stop multicast service and kill selfelectcontroller before installing cba. This was necessary because selfelectcontroller accesses the service control manager quite a bit and caused the service uninstall calls to fail in cba8inst to fail.
  • 493709 LANDesk Targeted Multicsast Service may crash
    • There was a timing problem in one of the classes that was spinning up threads in its constructor that accesses itself.
  • 588573 Posting core cert fails in 2019.1 when CSA cert only has a CN value
    • When checking for a name mismatch in the certificate of the remote computer, the code was including a comma after the computer name when comparing the string. This worked for most 3rd party certificates, but there are some that it did not. The fix was to only verify the computer name, without including the comma.
  • 647649 Added additional validation for any processes requesting elevation
    • -

Agent Settings

  • 465692 "Remind me in" option on reboot prompt may not work
    • A timing issue which caused the next prompt time to be incorrectly overwritten was fixed.

Alerting

  • 268388 Unable to change actions or build new rulesets for core side alerts.
    • We are now allowing the user to change actions for core side alerts if they clone the original one that logs to the core.
  • 444985 Alert configured to report on software installed or removed is not detecting all software installed or removed
    • Now we scan for 64 bit applications and user data registry to report on software installed or removed
  • 472144 Cismbios.sys may cause blue screen during windows 10 upgrade
    • On some Dell computers, the Realtime Inventory component may cause some blue screens.
  • 538576 Core is not sending info about machine name to Syslog server
    • Added client FQDN to syslog alert message
  • 603586 Alert Emails sent in TLS 1.0
    • Starting using openssl 1.1.1 for email alerts to negotiate TLS version with SMTP server.

AntiVirus

  • 301508 Install of BitDefender Update Server uninstallls av on core and will never install
    • The installation of the Ivanti Antivirus Update Server ismistakenly removing 3rd party antivirus. If this un-installation requires a reboot, it will prevent the installation of the Ivanti Antivirus Update Server to complete until the computer is manually restarted.
  • 431027 Bit Defender/Ivanti AV inventory data may disappear from inventory
    • If Windows Defender is enabled on Windows 10, in addition of the Ivanti Antivirus, then only one antivirus will be reported to the core. As a result, the Ivanti Antivirus may not be reported.
  • 497482 Office 2010 SP2 x86 installation causes Antivirus Inventory information not to be shown
    • On computers with MS Office 2010 installed, some antivirus may not be listed in the inventory information.
  • 503633 Security Activity Summary pop up window displaying incorrect information.
    • The Security Activity Summary form is displaying an incorrect count of computers with infected and quarantined files.
  • 504476 The service path for the "LANDesk Adaptive Settings" service has not had quotes put around it
    • Fixed an unquoted service path on the Landesk Adaptive settings service.
  • 531960 ldavhlpr not posting Windows Defender in inventory
    • Starting Windows 10 build 1809, the Windows Defender component "MSASCui.exe"has been removed. It was used by the inventory agent to identify the Windows Defender version. As a result Windows defender is no longer detected.
  • 537490 In-place upgrade from LANDESK Antivirus (Kaspersky) to Ivanti Antivirus (Bitdefender) is failing during uninstall of the Kaspersky offering
    • When upgrading from an existing installation of LANDesk Antivirus to Ivanti Antivirus on Windows x64, the Ivanti Antivirus installation may fail, leaving the computer unprotected.
  • 601831 Landesk Antivirus service may not initialize after MR4 Kaspersky update
    • After upgrading to Kaspersky MR4, Landesk Antivirus service failed to initialize.
  • 628468 Antivirus 2017 fails to install if remnants of the prior Ivanti Antivirus solution exists on the client
    • If the installation of the Ivanti Antivirus over the legacy version fails, it may cause any following attempts to fail too.

Appmon

  • 481815 Added more details about the reason EPM reports a patch as causing an application failure
    • -
  • 493643 SQLite exceptions "attempt to write a readonly database"
    • If the Ivanti Application Monitoring database is set to read-only for any reason, the appmon service will not work properly and will log error messages.
  • 493674 Broken Applications report does not associate Chrome Patches to reported chrome issues.
    • -

Console

  • 351506 Distribution and Patch settings are grayed out, when accessed through the Agent Configuration
    • Distribution and Patch settings are no longer greyed out when accessed through the Agent Configuration dialog.
  • 435376 Remote console sizing issues on Windows 10 with multiple monitors
    • Added additional handling for the Windows Snap feature. The console used to crash when minimized with Snap.

Core Install

  • 605936 CreateTunnelArchive.exe crashes during upgrade when installation is not on C drive
    • Fixed a crash during install if the product is installed on a drive other than c:.

CSA

  • 172340 Client Access Certs in Provisioning status not accepted via CSA
    • The broker service was modified to accept provisional certificates (the kind provisioning uses) as well as the regular approved certificates.

CSEP

  • 455785 Software Distribution fails almost immediately with "Cannot Find Agent" message
    • When AgentState is turned on, the functional address SWD uses to contact devices was defaulting to their short name instead of their IP address. On some networks, there can be a time period where this may not match up with the information the core has about the device. This could cause raxfer to get confused and not be able to contact those devices.
  • 493656 PXE Subnets Disabling at unknown intervals
    • -
  • 585355 Agents are sending ARP traffic every 10 seconds
    • Agents no longer send ARP requests every 10 seconds.
  • 593812 CSEP Elections will not run if Agent state is disabled.
    • Fixed CSEP continuing to run if agent state is disabled.
  • 603640 SelfElectController.exe may consume high CPU
    • fix for selfelelectcontroller.exe sometimes using high cpu when refreshing the gateway information.

Data Analytics

  • 312141 Microsoft Volume License connector fails to sign in
    • The Microsoft Volume Licensing connector now supports logging in via Azure AD Credentials.
  • 363125 Barcode merge service may not merge devices correctly
    • Fixed the problem that merge is based on barcode scan type.
  • 436597 Normalization Rule(s) Fail at 400+ Machines
    • Changed the database query to process large amounts of machines the same way as smaller amounts.
  • 477387 B2B Connector - Dell Warranty problems
    • The API key we were using expired. We needed to get a new key and use it instead.
  • 519998 Discovery Services - SNMP binaries need an update
    • Upgrade Dart.Snmp.dll from 4.5.0.0 to 4.10.3.0 for better SNMP v3 support.

Device Control

  • 461757 The Shadowcopy folder may not be protected by EPS
    • When using the EPM Device Control / Shadow Copy feature, the folder "c:\windows\system32\shadowcopy" is not protected, so an user with administrator permissions could delete some evidences,
  • 487442 Device not blocked after temporary allowance time has expired
    • When the Ivanti Device Control component is temporarily disabled for a give period using an authorization code, it won't automatically switch back to the blocking mode.
  • 514341 HP440 clients with EPS installed may receive bluescreen
    • In some rare cases, when the Ivanti Device Control component is enabled, using some specific models of USB keys in combination with some specific models of motherboards may result in a blue screen.

Endpoint Security

  • 492845 EPS may cause blue screen when running Driver Verifier
    • When running Driver Verifier, a bug check may be triggered while executing a program that send emails using the SMTP protocol.
  • 492865 "An attempt to modify system startup was detected" alert continues to show after selecting not to be alerted.
    • An "attempt to modify system startup was detected" alert continues to show even if the application control settings are set to always allow such action.
  • 504213 Process Exclusions Needed in Bitdefender AV Product
    • Change: the Ivanti Antivirus "Realtime exclusions" setting now also apply to the antimalware engine in addition to the realtime file scanning.
  • 509439 Endpoint Security Service crashing causing UAC prompt at startup
    • When an executable file use some very long strings in the file description / company name / product name fields, it might cause a random crash in the EPS service.
  • 517432 VPP distribution package searching all apps instead of just VPP
    • Fixed a problem in the Apple VPP app search where it was returning some non-VPP apps.
  • 531349 EPS service is crashing while stopping
    • An event"Faulting application name: LDSecSvc64.EXE" is recorded in the Windows event log when the Ivanti EndPoint Security Service is stopping
  • 572566 Device Control's exception setting may add wrong value
    • In Device Control, exceptions related to CD/DVD devices may be saved with wrong values.
  • 576700 With EPS installed, QFIL.exe (QualComm Flash Imager Loader) cannot download data properly
    • When the EPM Endpoint Security agent is installed, it may prevent some Android devices to communicate with the computer if they are using QualComm drivers (i.e. using the "QualComm Flash Imager Loader" software), because of a timeout.
  • 605026 Scope feature may not work in the Security Activity window
    • Security Activity filter was changed to take into account the "Scope" option.
  • 605027 Line heads of EPS options are not aligned in EPM 2018.3 SU4
    • The UI elements of the EPS options dialog were realigned to fit the Japanese translation.
  • 636728 EPS general settings and Ivanti Firewall settings formspartially cover the buttons OK and Cancel at the bottom of the window
    • -

HIPS

  • 454679 EPSUI crashes when trying to display violations on computers with FIPs enabled.
    • The Ivanti Endpoint Security agent UI is crashing on computers where the “FIPS-compliant” encryption mode is enabled.

Inventory

  • 443391 Information the inventory scanner gathered from the properties of certain modules included the square brackets.
    • Corrected how the ldappl3.ini file parsed that information.
  • 452328 Inventory > LDAP Groups > Machine > "Display Name" field is not collected correctly
    • Fix to get the full display name, not just the first character.
  • 462011 The agent sees "Microsoft Windows 10 Pro for Workstation" as "Microsoft Windows 10, 64-bit"
    • Correctly detect "Microsoft Windows 10 Pro for Workstation"
  • 473022 Computer Location field in inventory is showing up as full LDAP name, not OU location
    • If the short form of the location does not exist in the last request results we send the FQDN form instead. We now don't send Computer Location unless we have the short form. That field is persistent in the DB so we will maintain the last short name sent.
  • 484739 Miniscans to errorscan without logging
    • Added exception handling to the new miniscan processing thread.
  • 485584 Inventory service may crash when scan file has an element where the primary key contains " ="
    • Improved parsing of primary keys in scan processing
  • 486506 Agentless Scanner may scan non-existent network
    • Fixed an issue in agentless scanning where the ip address to be scanned would be incorrect in some circumstances.
  • 492965 4100 event viewer error on the fileconnectioninfo table
    • inventory service will now handle much larger attribute values. In this case it was 1.3 Mb.
  • 500086 Inventory shows wrong OS version for Windows Server 2019
    • Now detects Windows Server 2019
  • 502125 Unable to edit the ldappl3.ini file properly
    • Included the cfg file data in the inventory tree view.
  • 576139 Addressed issue with unexpected file upload via Inventory
    • -

Localization

  • 537328 Japanese Localization-Strings in the Scheduling a task's properties screen is unlocalized.
    • The 'Wake Up' Option is now Localized from Tools|Distribution|Manage Scripts|Public Scripts|right click inventory dialog
  • 590079 Japanese Localization -'Apple Profile Signing' in Device Detection
    • In Console, go to Configure (top) Device Detection 2. Check UI for 'Apple Profile Signing' is NOW LOCALIZED with SU4 Release

Mac

  • 441708 "End user must grant permission" on Mac HTML Remote Control does not work.
    • -
  • 466825 Mac Agent Deployment fails due to Data Analytics OS name normalization
    • Normalized OS names caused the core to attempt to deploy a legacy mac agent which fails to install.
  • 499457 macOS agent/profile install fails due to DTD verification
    • If a Core server was in a network without internet access, the Microsft LoadXML Api was attempting to validate the DTD by downloading from the document link. The option doc.XmlResolver = null was added to prevent the API from downloading the DTD externally.
  • 504230 macOS Device using integrated management cannot resolve configuration profiles through the core server
    • If a device was mdm and agent managed, and had multiple active network interfaces, alternating mobile syncs and agent inventory scans could toggle back and forth the primary MAC address for the device in inventory. This behavior was present in 2018.3 and later. If a provisioning template was scheduled for this device, obtaining a provisional client certificate could fail if the MAC address used in the client certificate request did not match the MAC address for the device in the scheduled provisioning template. This would cause the client certificate request to fail, and the device would then be unable to validate itself to the core, which is required by the agent to resolve configuration profiles. This has been fixed.
  • 508838 Remote Control - Sometimes, permission dialog appears only after viewer has already aborted due to timeout
    • Sporadically, when starting a remote control session to a macOS computer with the option to have the user grant the remote control session, the dialog asking the user to confirm the session would be displayed with a delay, causing the remote control viewer to deny the session before the user confirmation was even shown on the remote machine.
  • 512949 Ivanti MDM install using VPP may fail with some newer apps.
    • Several Microsoft and other newer applications failed to install via EPM's MDM management via VPP. Package should be deleted and rebuilt after SU2 install to resolve issue. TheMicrosoft Apps fixed includes: Word, Excel, PowerPoint, Remote Desktop 10
  • 533672 Ivinstallmacos "escaped" characters and file names need to be removed/replaced
    • If links are copied into one of the text fields for the Install macOS provisioning action, and there are any HTTP URL encoded characters, they are decoded in order to make the validation tests in the User Interface work correctly. Previously if there were any encoded characters, such as a space, these would cause the validations to fail. This issue has now been fixed.
  • 541984 Portal Manager tasks disappear after the reboot when using LDAP targeting
    • -
  • 572580 LDVDETECT - Cannot return logic on file that does not exist
    • Files that are missing are now properly reported.
  • 593283 Mac inventory occasionally hanging indefinitely
    • We found a race condition resulting from some changes to the Apple macOS APIs. We have changed the way we monitor calls to external applications such as system_profiler and ldiscan. This has fixed the problem.
  • 607110 macOS System Preferences restrictions are not correctly saved
    • The Mac profile for macOS Device configuration was not saved correctly if the profile contained settings for Restrictions payload. After save and reload, the restrictions settings for "Touch ID" and "Wallet & Apple Pay" check boxes were displayed incorrectly as 'Third-party Preferences Panes". In 2019.1 SU2 and 2018.3 SU5 the settings are correctly displayed after save and reload the profile for newly created profiles.For profiles created with the previous version of EPM that had the problem simply remove the entries from 'Third-party Preferences Panes' and use the check boxes.
  • 630023 EPM Mac agent does not install via UDD
    • -
  • 636442 Unmodeled Device information error
    • Added modeled data for Mac monitors and macOS MDM information.

MDM

  • 636004 Windows 10 version for updates later than 1803 may not display correctly in iventory
    • MDM-enrolled Windows 10 devices were reporting (in the device inventory) correct version up until and including 1803. All versions afterwards would report as 1803. Now all versions as of 2018.3 SU5 release report the correct version (up to and including 1909).

Mobility

  • 463050 iOS VPP apps not updating properly
    • EPM now only requests install of app on the device if it is not up-to-date. Note - apps may fail to update or install if the device OS version is too old to be supported by the app.
  • 467876 MDM Help from Autopilot page links incorrectly to iOS profile signing page
    • Help button on MDM Autopilot screen now goes to correct Autopilot help page.
  • 467877 MDM Help missing on Agent configuration for MDM enrollment screen
    • Help button added and goes to appropriate help topic for MDM enrollment with agent.
  • 476189 Unable to release VPP licenses for reallocation
    • This fix allows us to reclaim the license for VPP tokens that had applications assigned to users via some other method whereas before this fix we could not.
  • 480861 Mobility Security Policy may be applied to MacOS inadvertently
    • A placeholder profile was being pushed down to all devices, iOS, tvOS and macOS as a means to help EPM sync profiles. On the Mac, sending this profile down was causing problems with securing the lock screen of the device.
  • 486184 iOS properties screen missing search bar when distributing VPP package
    • VPP apps for iOS show as 'iOS' now instead of showing as 'OSX' apps in the VPP Distribution UI
  • 508167 Missing resource error dialog after configuring MDM and clicking OK
    • The warning that if MDM profile signing is not configured will now appear correctly with all text present. Previously the dialog appeared but did not offer any intelligible information to the user.
  • 509510 VPP apps for iOS show as OSX apps on VPP Distribution UI
    • VPP apps for iOS show as iOS now instead of showing as OSX apps on VPP Distribution UI

Patch Manager

  • 431727 Scheduled Download, Patch and Definitions settings UI displays incorrectly
    • The Scheduled Update Information window displayed the selected group to be "Unassigned" in the "Patch and definition settings" panel. Now the selected group should be displayed according to the selected option.
  • 454665 Compliance Group does not display patches assigned
    • Show Approved for scoped scan vulnerabilities in Compliance Group.
  • 470347 Patch definition update changed exisitng definition settings
    • Patch definitions with multiple rules targeting the same filename were having their scan status reset when downloading content updates. The process was fixed so that the scan status is now preserved.
  • 479719 Dark Core patch download attempt results in "Signature Not Valid" Errors
    • The download was failing because of some certificate validation errors that are now fixed in 2018.3.2 build.
  • 492868 Application Monitor Service fails if .net is not 4.5.1 or greater on the endpoint
    • On Windows 7, if .net 4.5.1 or more recent is not installed, the "Ivanti Application Monitor" component, used to "Allow the user to report broken applications" in the "Distribution and Patch" settings, fails to install.
  • 501577 Unable to delete machines that are associated with an Entry in DBO.patchissuelist
    • When a machine has some associated "Broken application" reports (Distribution and Patch / User Feedback), it's not possible to delete it from the device list because of a conflict in the SQL schema.
  • 526545 Vulscan does not run as expected when there are more than 6 continue taks in the continue RegKey
    • Vulscan does not run as expected when there are more than 6 continue taks in the continue RegKey. The behavior has now been fixed.
  • 570257 Appmon: Blue screen when a process with a very long command line is starting
    • When the Ivanti Application Monitor component (part of Distribution and Patch) is installed, if a process is starting with a very long command line (more than 30.000 characters) it may result in a blue screen.
  • 581945 IvAppMon Error--the memory dump shows an infinite loop in a function called when the driver is unloaded.
    • When the Ivanti Application Monitor component (part of Distribution and Patch) is installed, if the computer is running since a long time and ran a lot of processes, it may cause a blue screen during reboot/shutdowns and randomly during any installs or uninstalls of software.

Provisioning

  • 174819 Adding Change Agent setting in Provisioning template leaves template unable to close and save
    • Fixed a hard-coded English string lookup that prevented the Change Agent Setting task from saving in non-English languages.
  • 456507 "Retry selected failed machines" also restarts pending and active devices in Provisioning Scheduled Task
    • If new machines were added to an existing task, and the "Retry selected failed machines" context menu was selected, all machines in the waiting state including the selected machines would restart the task. The base method for starting tasks on targeted machines was fixed to not allow this to happen. The scheduler was also updated to set the machine state appropriately.
  • 472214 Copy & Paste option missing from Conditions in provisioning templates.
    • Fixed an issue that was causing right click on conditions to not work. This prevented copying or pasting conditions or pasting actions into conditions.
  • 535529 Customize Mapped Software provisioning action fails in 64-bit UEFI WinPE
    • The problem cause by Microsoft Windows Form API. With high resolution monitor, form property AutoScaleMode set to Font or Dpi crash the app in Windows PE. The fix is to set scale mode to none.

RC Server

  • 524518 Copy and paste disconnects on big size capture (40kb+)
    • Fix an issue in WS RC with large amounts of data copied. Increased maximum size to 1 megabyte of text.
  • 584418 RC tunnel unreachable on client side immediately after restart
    • Fix issues with the Linux based rc tunnel. Previously it would only allow 1024 connections. Now it will be limited to the ulimit set on the system.

Remote Control

  • 486072 WS remote control - Mouse pointer is inaccurate with multiple monitors and/or high resolution.
    • Fixed virtual spacing of multiple monitors and higher resolution monitors that casued the pointer to reflect the icorrect position on the screen.
  • 492446 Remote Control WS often shows only gray screen or "Video not available"
    • Fixed an issue that would cause the remote control service not to be able to access the local user's screen space. This would cause a grey screen to show up on the viewer.
  • 503206 Stopping the Landesk Remote Control Service (ISSuser.exe) can cause high CPU utilization
    • Fixed issue when stopping the Remote Control Service will occusionaly cause issuer.exe to consume all available cpu cycles until the device is rebooted
  • 506994 RCKVM.exe processes count grows indefinitely in some circumstances
    • Fix an issue where rckvm processes used in remote control could become orphaned and continue to run until reboot.
  • 542674 Remote Control WS shows only gray screen, no video, rckvm out of control
    • Fix a problem where rckvm may spawn lots of copies of itself.
  • 601048 Non Admins are not able to use rcviewer.exe
    • Fixed issue so non-admin users can run the rcviewer to remote control a device.
  • 605992 Failure to gather agent state information when user creates database with non-English language
    • Fix for agent state information to work with a non-English database.
  • 649806 Addressed Remote Control authentication issue that could allow unauthorized access
    • -

Rollout Projects

  • 598388 Adding targets from query generates 'Object reference not set to an instance of an object'
    • For this feature to work, have to set vulneribility definition. Added Definitions and Patch list panels to patch task templates.

Software Distribution

  • 232949 ldapwhoami.exe triggers smartcard reader dialog box
    • Use LDAP, instead of LDAPS, when smart card service is running.
  • 233248 Teams do not display correctly in software distribution
    • Team/tenant handling was missing verification code and was causing team/tenants to not show up properly in the package manager.
  • 349929 Timeout when changing task settings
    • Saving a task with thousands of static targets now succeeds and no longer causes a time-out error.
  • 464783 MSI Transform not work for not using msiexec.exe
    • Made transform work for MSI packages that use the EPM-provided library to install (not msiexec.exe).
  • 467044 MSI Transform button exists on non-MSI Windows package properties
    • Hide the Transform button when non-MSI packages are chosen.
  • 467101 MSI Transform button should be disabled when an MSI package path is not selected
    • For MSI package type the 'Generate transform' button only enabled when MSI package is selected in 'Package information' page.
  • 468384 Source only distribution task should not check preferrred servers
    • Download agent setting will only from the source, not try preferred server.
  • 472221 Some files may install on core when creating MST Transform
    • Fixed the problem when generating a transform, it would trigger installing the actual package for certain kind MSI package.
  • 475667 'Disable client queuing for this package' does not work
    • The option to disable client queuing was removed. Client queuing is now always enabled.
  • 479685 Task status remains in an active state indefinitely
    • If status failed to send to the core due to network problem and cached for later send, only cache the most current one.
  • 489030 MST transform overwrites previously created mst files
    • Make sure the MST file name is unique in name dialog when initially show.
  • 489439 If PolicySync /enforce runs at reboot it may interfere with sdclient continue tasks.
    • PolicySync now checks to see if there is a reconnect in the actions.ini. If there is, PolicySync /enforce will exit.
  • 489595 Non-EPM Admins cannot perform any EPM agent functions using the Diagnostics tool.
    • Needed to add the DiagnosticsEdit right method decoration in LDApi.
  • 522207 Running Windows Actions as a limited user doesn't work
    • When run action as a user, append "-Scope CurrentUser" to powershell script.
  • 523782 SDClient.exe crashes during the attempt to uninstall MSI
    • When uninstalling an MSI package, it may only rely on product code and local path could be empty.
  • 525968 Bundle and subfolder names are changing to the team name
    • When verifying the team/tenant name, the verify method only needed to check root nodes.
  • 527404 Folders are not visible when creating https distribution packages.
    • Fixed FileList function in Package class to better handle https
  • 528287 Wake On LAN port cannot be changed
    • The Wake-On-LAN functionality for task scheduling was updated to use the port specified in Configure Services (stored in the KeyValue database table).
  • 530726 LDAPS environments may experience smart card authentication prompts when LDAPWhoAmI runs
    • Add choice of always use LDAPS, not use LDAPS and dynamic on not use LDPAS if detected that a smart card connected to the machine.
  • 534078 MSI package doesn't allow for URL to start with an /i
    • The built-in command line options weren't properly quoted in certain cases.
  • 541985 Ignore maintenance window option ignored unless manually changed
    • Added extra checking in swdCoreCustomAction.exe to make sure the maintenance window settings were set by default.
  • 575285 Scheduled tasks are very slow to load targets and information
    • Add computer object required a column to a targeted device that was inherited from computer to avoid accessing the database for each device instead of loading up all at once.
  • 576134 SDClient\Vulscan hang when starting download
    • To avoid a hanging situation, fixed algorithm in lddwnld to give up after a few failed attempts instead of keep trying indefinitely to find a peer with a file.
  • 586213 Tmp tables could become orphaned in the database
    • This issue caused by SQL server fail to drop table. The cause of this failure may caused by table still in use, such as replication. The fix is using real temporary table name that is leading with # character so that in case the table cannot be dropped, SQL server will take care of it later.
  • 606894 Bundles may install packages multiple times if policysync runs during install
    • Potential to install packages out of order causing system malfunctions depending on the packages that are getting installed.
  • 614299 Portal Manager Date format does not match location
    • An issue affecting the localization of the "Last Run" column in Portal Manager was corrected.

Web Console

  • 575611 Legacy Remote control via management gateway button does not work
    • Fixed an issue that prevent a legacy remote control session through the management gateway.

Win Console

  • 479492 Archiving Audit logs may fail
    • The parsing logic for detecting the DB architecture was broken and failed to parse when doing audits.
  • 583303 User names that begin with the letter 'x' cause the web console to not function properly
    • escape '\' for user name use in .aspx page.
  • 618576 Windows start menu gets covered up by console
    • Fixed an issue that caused the windows console to cover the start menu when maximized.

XDD-UDD

  • 520012 XDD Exclusions go missing once Agentless Scanner scans the device
    • Agentless Scanning to ignore XDD exclusions

Known Issues

Linux

  • 656974 AIX Machines Fail to Post SCN to the Core
    • https://forums.ivanti.com/s/article/AIX-Machines-Fail-to-Post-SCN-to-the-Core

Files in this patch

AGLSManager.exe
308.09kB
11.0.1.1130
3/7/2019 9:47 AM
AGLSMonitor.exe
265.60kB
11.0.1.1379
1/21/2020 12:43 PM
AMEventProvider.dll
34.63kB
1.1.116.0
7/16/2019 7:21 PM
antivirus8.cab
5.94MB
-
7/2/2019 10:59 AM
ApmService.dll
56.74kB
11.0.1.1207
7/9/2019 6:14 PM
AVBiz.dll
249.53kB
11.0.1.1138
3/8/2019 7:11 AM
avsetup.exe
1.01MB
11.0.1.1126
3/6/2019 4:59 AM
AVUI.dll
3.05MB
11.0.1.1154
4/4/2019 8:25 AM
BouncyCastle.Crypto.dll
2.13MB
1.8.15362.1
4/26/2016 1:16 PM
BrokerConfig.exe
315.03kB
11.0.1.1379
1/21/2020 12:42 PM
brokerservice.exe
364.55kB
11.0.1.1108
2/13/2019 7:45 AM
ClientConfig.dll
2.22MB
11.0.1.1363
11/20/2019 4:34 AM
ClientSetupTaskHandler.dll
81.35kB
11.0.1.1320
11/8/2019 3:07 PM
Commands.xml
22.93kB
-
11/14/2019 2:42 PM
console_rptfiles.cab
954.01kB
-
11/7/2019 5:53 PM
CoreSyncService.exe
43.17kB
11.0.1.1196
7/2/2019 7:31 PM
CreateTunnelArchive.exe
15.84kB
11.0.1.1324
11/12/2019 2:23 PM
csc.exe
48.42kB
2.8.2.62916
5/16/2018 3:35 PM
csi.exe
14.92kB
2.8.2.62916
5/16/2018 3:35 PM
CustomizeMappedSoftwareHandler.exe
57.33kB
11.0.1.1256
9/13/2019 11:42 AM
CustomizeMappedSoftwareHandler_x64.exe
57.33kB
11.0.1.1256
9/13/2019 11:42 AM
Datamart.xml
858.42kB
-
11/20/2019 12:12 PM
DatamartPM.xml
53.68kB
-
10/17/2019 3:25 PM
EPSUI.exe
676.76kB
11.0.1.1138
3/8/2019 7:11 AM
gatewaybiz.dll
67.91kB
11.0.1.1219
7/12/2019 5:49 PM
gatewayui.dll
267.17kB
11.0.1.1203
7/8/2019 5:34 PM
HipsClientConfig.exe
780.67kB
11.0.1.1226
7/17/2019 3:55 PM
IdentityServer.msi
7.47MB
-
11/14/2019 2:42 PM
InstallCommon.Version.xml
86.00 B
-
4/17/2019 10:25 PM
Installer.exe
34.63kB
11.0.1.1224
7/16/2019 7:21 PM
InstallerConfig.xml
1.45kB
-
3/6/2019 5:09 AM
issuser.exe
2.91MB
11.0.1.1370
12/5/2019 1:47 PM
Ivanti.ManagementSuite.CrowdStrikeConnector.dll
28.49kB
11.0.1.1297
10/23/2019 2:29 AM
IvAppMon.dll
58.84kB
11.0.1.1224
7/16/2019 7:21 PM
IvAppMonSvc.exe
41.67kB
11.0.1.1224
7/16/2019 7:21 PM
IvAppMonUI.exe
116.84kB
11.0.1.1224
7/16/2019 7:21 PM
KavClient.cab
289.30MB
-
7/2/2019 10:59 AM
KavConnector.cab
3.52MB
-
7/2/2019 10:59 AM
KavMacClient.cab
239.20MB
-
7/2/2019 11:00 AM
LANDesk.Auditing.Archive.dll
23.53kB
11.0.1.1127
3/6/2019 8:37 AM
LANDesk.Common.RunMethod.exe
19.26kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.DataServices.dll
96.70kB
11.0.2.1118
4/17/2019 10:25 PM
LANDesk.Install.Common.Actions.dll
68.18kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.Common.Business.dll
38.00kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.Common.dll
68.50kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.Common.View.dll
89.50kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.ConfigUtility.exe
27.30kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.LDMS.dll
1.67MB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.LDMS.View.dll
19.50kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.Install.Legacy.Actions.dll
10.00kB
11.3.22.17
4/17/2019 10:25 PM
LANDesk.ManagementSuite.ClientConfigUI.dll
427.98kB
11.0.1.1036
1/10/2019 12:12 PM
LANDesk.ManagementSuite.Core.Anonymous.dll
52.70kB
11.0.1.1206
7/9/2019 2:17 PM
LANDesk.ManagementSuite.Data.dll
1.34MB
11.0.1.1297
10/23/2019 2:31 AM
LANDesk.ManagementSuite.Database.dll
182.23kB
11.0.1.1364
11/20/2019 12:04 PM
LANDesk.ManagementSuite.RESTful.Resources.dll
97.20kB
11.0.1.1113
2/13/2019 3:52 PM
LANDesk.ManagementSuite.RESTful.Service.dll
246.46kB
11.0.1.1034
1/8/2019 5:58 PM
LANDesk.ManagementSuite.SelfElectionBiz.dll
65.90kB
11.0.1.1259
9/17/2019 10:03 AM
LANDesk.ManagementSuite.SelfElectionUI.dll
204.61kB
11.0.1.1143
3/20/2019 3:29 PM
LANDesk.ManagementSuite.SoftwareDistribution.Business.dll
940.84kB
11.0.1.1269
10/9/2019 12:49 PM
LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
2.92MB
11.0.1.1379
1/21/2020 12:42 PM
LANDesk.ManagementSuite.WinConsole.dll
6.19MB
11.0.1.1340
11/14/2019 1:48 AM
LANDesk.Provisioning.Business.dll
743.12kB
11.0.1.1367
11/21/2019 6:40 PM
LANDesk.Provisioning.Plugin_CreateDirectory.dll
23.42kB
11.0.1.1367
11/21/2019 6:40 PM
LANDesk.Provisioning.WinUI.dll
3.19MB
11.0.1.1370
12/5/2019 1:49 PM
LANDesk.Scheduler.TaskHandler.dll
348.88kB
11.0.1.1269
10/9/2019 12:48 PM
LANDesk.Scheduler.WOL.TaskHandler.dll
36.96kB
11.0.1.1309
11/4/2019 7:43 AM
LANDesk.ServerManager.UI.dll
133.41kB
11.0.1.1238
7/31/2019 3:50 PM
LANDesk.WebConsole.Common.dll
64.81kB
11.0.1.1238
7/31/2019 3:50 PM
LANDeskLaunchpadDLL.dll
1.05MB
11.0.1.1309
11/4/2019 7:43 AM
LANDeskTaskHistoryDLL.dll
203.01kB
11.0.1.1309
11/4/2019 7:43 AM
Lclxclnt.dll
154.16kB
11.0.1.1379
1/21/2020 12:42 PM
ldapinfo.dll
299.96kB
11.0.1.1321
11/11/2019 3:33 PM
LDApplications.exe
359.91kB
11.0.1.1302
10/28/2019 11:33 AM
LDAVBD.dll
445.83kB
11.0.1.1154
4/4/2019 8:25 AM
LDAVBD64.dll
520.49kB
11.0.1.1154
4/4/2019 8:25 AM
ldavhlpr.dll
952.22kB
11.0.1.1163
4/10/2019 10:37 AM
LDAVKES.dll
1,020.68kB
11.0.1.1379
1/21/2020 12:42 PM
ldcache.dll
1.07MB
11.0.1.1007
11/28/2018 3:19 PM
lddwnld.dll
1.42MB
11.0.1.1255
9/11/2019 1:36 PM
lddwnld_x64.dll
1.90MB
11.0.1.1255
9/11/2019 1:36 PM
lddwnldClassLib.dll
155.74kB
11.0.1.1255
9/11/2019 1:36 PM
ldHpCommon.dll
906.20kB
11.0.1.1379
1/21/2020 12:42 PM
LDInv32.exe
6.04MB
11.0.1.1240
8/5/2019 2:53 PM
LDInvHandler.dll
19.38kB
11.0.1.1379
1/21/2020 12:43 PM
LDInvHandlerData.dll
13.81kB
11.0.1.1379
1/21/2020 12:43 PM
ldiscn32.exe
3.77MB
11.0.1.1116
2/14/2019 4:48 PM
LDMBBApi.dll
48.27kB
11.0.1.956
10/10/2018 12:46 PM
LDProvisionSecureErase.exe
118.84kB
11.0.1.1379
1/21/2020 12:43 PM
LDSecSvc.exe
2.08MB
11.0.1.1174
5/6/2019 8:33 AM
LDSecSvc64.exe
2.80MB
11.0.1.1174
5/6/2019 8:33 AM
MBBScanner.exe
26.56kB
11.0.1.956
10/10/2018 12:46 PM
MDMInstall.msi
21.75MB
-
2/12/2020 4:06 PM
Microsoft.AI.ServerTelemetryChannel.dll
110.55kB
2.8.1.22898
10/19/2018 8:17 PM
Microsoft.ApplicationInsights.dll
339.05kB
2.8.1.22898
10/19/2018 8:14 PM
Microsoft.Build.Tasks.CodeAnalysis.dll
119.92kB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeAnalysis.CSharp.dll
4.46MB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeAnalysis.CSharp.Scripting.dll
28.42kB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeAnalysis.dll
2.30MB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeAnalysis.Scripting.dll
125.42kB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeAnalysis.VisualBasic.dll
4.98MB
2.8.2.62916
5/16/2018 3:35 PM
Microsoft.CodeDom.Providers.DotNetCompilerPlatform.dll
32.48kB
1.0.41016.0
10/16/2017 3:14 PM
Microsoft.Deployment.WindowsInstaller.dll
172.00kB
3.5.2430.0
4/17/2019 10:25 PM
Microsoft.DiaSymReader.Native.amd64.dll
1.43MB
14.12.25830.2 built by: VCTOOLSD15ULDR
12/5/2017 1:36 AM
Microsoft.DiaSymReader.Native.x86.dll
1.13MB
14.12.25830.2 built by: VCTOOLSD15ULDR
12/5/2017 1:36 AM
Microsoft.Web.Administration.dll
124.00kB
6.1.7600.16385
4/17/2019 10:25 PM
Microsoft.Web.Infrastructure.dll
44.35kB
1.0.20105.407
7/25/2012 12:48 PM
MstHelper.dll
57.31kB
11.0.1.986
11/13/2018 11:11 AM
Newtonsoft.Json.dll
647.00kB
11.0.2.21924
3/24/2018 6:44 PM
NWMapApp.exe
217.22kB
11.0.1.973
10/17/2018 11:05 PM
NWMapWPF.UI.dll
127.98kB
11.0.1.960
10/15/2018 5:50 PM
package.data.dll
121.30kB
11.0.1.1176
5/7/2019 5:08 PM
PanelManager.dll
392.05kB
11.0.1.1320
11/8/2019 3:08 PM
PatchBiz.dll
1.64MB
11.0.1.1356
11/15/2019 8:24 AM
PatchManagement.dll
10.23MB
11.0.1.1209
7/11/2019 3:21 AM
Pluralsight.Crypto.dll
39.50kB
1.1.0.0
4/17/2019 10:25 PM
PolicyData.dll
73.98kB
11.0.1.1239
7/31/2019 4:23 PM
PolicySync.exe
89.63kB
11.0.1.1035
1/10/2019 11:39 AM
PolicyTaskHandler.exe
40.17kB
11.0.1.1177
5/8/2019 7:26 PM
PreferredServer.dll
24.45kB
11.0.1.951
10/2/2018 9:31 PM
ProductProperties.xml
14.38kB
-
11/14/2019 2:42 PM
prov_loaddb.exe
24.84kB
11.0.1.1367
11/21/2019 6:40 PM
ProvisionHandlerLibrary.dll
21.01kB
11.0.1.1256
9/13/2019 11:42 AM
ProvisioningWebService.dll
45.03kB
11.0.1.1367
11/21/2019 6:39 PM
PXESvc.exe
3.43MB
11.0.1.1074
1/30/2019 9:19 AM
RAXfer.dll
1.87MB
11.0.2.67
1/30/2020 2:45 PM
raxfer_x64.dll
2.33MB
11.0.2.67
1/30/2020 2:45 PM
RCCertRemove.exe
15.99kB
11.0.1.1161
4/5/2019 2:00 PM
rcgui.exe
461.33kB
11.0.1.1370
12/5/2019 1:47 PM
rckvm.exe
333.17kB
1.1.0.15
12/5/2019 1:47 PM
rckvm_x64.exe
446.15kB
1.1.0.15
12/5/2019 1:47 PM
RCService64.exe
1.28MB
11.0.1.1370
12/5/2019 1:47 PM
rcuser.exe
2.14MB
11.0.1.1235
7/23/2019 4:09 PM
RCViewer.exe
45.19MB
1.4.0.296084
6/28/2019 2:00 PM
RemoteControlAuth.dll
105.63kB
11.0.1.1376
1/15/2020 8:28 PM
RemoteControlLogging.dll
24.45kB
11.0.1.1172
4/26/2019 12:32 PM
rollupcore_rptfiles.cab
915.29kB
-
11/7/2019 5:53 PM
rptfiles.cab
979.02kB
-
11/7/2019 5:53 PM
schedsvc.exe
316.56kB
11.0.1.1379
1/21/2020 12:43 PM
sdclientlib.dll
1.35MB
11.0.1.1379
1/21/2020 12:43 PM
SelfElect.dll
610.16kB
11.0.1.1231
7/19/2019 4:37 PM
SelfElect_x64.dll
784.71kB
11.0.1.1231
7/19/2019 4:37 PM
SelfElectController.exe
532.03kB
11.0.1.1249
8/23/2019 1:40 PM
sendemail.exe
2.09MB
11.0.1.1297
10/23/2019 2:30 AM
SendSyslog.exe
34.50kB
11.0.1.1366
11/21/2019 5:48 AM
ServerAuthentication.dll
41.00kB
11.0.1.1384
1/29/2020 4:25 PM
setup.exe
2.74MB
9.60.0.105
1/30/2020 3:13 PM
Setup.exe
198.30kB
11.3.22.17
4/17/2019 10:25 PM
Setup10.exe
38.48MB
11.0.1659
1/24/2020 2:28 PM
softmon.exe
806.85kB
11.0.1.1346
11/14/2019 11:44 AM
sqlite3.dll
502.00kB
-
1/30/2019 8:29 AM
sqlite3-x64.dll
860.00kB
-
1/30/2019 8:18 AM
stamper.exe
188.04kB
11.0.1.1195
7/2/2019 11:08 AM
svccfg.exe
801.81kB
11.0.1.1379
1/21/2020 12:42 PM
SWD.Package.BATFile.xml
3.74kB
-
2/28/2019 12:38 PM
SWD.Package.ESWD.xml
3.53kB
-
2/28/2019 12:38 PM
SWD.Package.GenericExe.xml
3.74kB
-
2/28/2019 12:38 PM
SWD.Package.MSI.xml
3.54kB
-
2/28/2019 12:38 PM
SWD.Package.PowerShell.xml
3.96kB
-
2/28/2019 12:38 PM
SWD.Package.WindowsScript.xml
3.74kB
-
2/28/2019 12:38 PM
SWD.Package.WinMetro.xml
3.53kB
-
2/28/2019 12:38 PM
swdCoreCustomAction.exe
93.05kB
11.0.1.1243
8/8/2019 7:49 PM
System.AppContext.dll
19.70kB
4.6.23123.0
11/5/2016 12:55 PM
System.Collections.Immutable.dll
238.70kB
4.6.24816.01
12/19/2016 8:17 PM
System.Console.dll
33.69kB
4.6.24705.01
11/5/2016 12:55 PM
System.Data.SQLite.dll
352.00kB
1.0.110.0
3/2/2019 8:00 PM
System.Diagnostics.DiagnosticSource.dll
56.05kB
4.6.26919.02
9/18/2018 8:38 PM
System.Diagnostics.FileVersionInfo.dll
22.91kB
4.6.24705.01
11/5/2016 12:55 PM
System.Diagnostics.StackTrace.dll
22.74kB
4.6.24705.01
11/5/2016 12:55 PM
System.Diagnostics.Tracing.dll
36.23kB
4.6.24705.01
11/5/2016 5:56 AM
System.IO.Compression.dll
109.36kB
4.6.24705.01
11/5/2016 12:56 PM
System.IO.FileSystem.dll
22.20kB
4.6.24705.01
11/5/2016 12:56 PM
System.IO.FileSystem.Primitives.dll
22.25kB
4.6.24705.01
11/5/2016 12:56 PM
System.IO.Pipes.AccessControl.dll
24.40kB
4.6.24705.01
11/5/2016 12:56 PM
System.IO.Pipes.dll
22.34kB
4.6.24705.01
11/5/2016 12:56 PM
System.Net.Http.Formatting.dll
180.63kB
5.2.60510.0
5/10/2018 11:38 PM
System.Reflection.Metadata.dll
454.20kB
4.6.24816.01
12/19/2016 8:20 PM
System.Security.AccessControl.dll
36.90kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Claims.dll
24.21kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Cryptography.Algorithms.dll
38.94kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Cryptography.Encoding.dll
22.93kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Cryptography.Primitives.dll
22.28kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Cryptography.X509Certificates.dll
37.96kB
4.6.24705.01
11/5/2016 12:57 PM
System.Security.Principal.Windows.dll
22.91kB
4.6.24705.01
11/5/2016 12:57 PM
System.Text.Encoding.CodePages.dll
748.90kB
4.6.24705.01
11/5/2016 12:57 PM
System.ValueTuple.dll
75.85kB
4.6.24705.01
11/5/2016 12:57 PM
System.Web.Helpers.dll
140.64kB
3.0.60510.0
5/10/2018 11:42 PM
System.Web.Http.dll
451.13kB
5.2.60510.0
5/10/2018 11:39 PM
System.Web.Http.WebHost.dll
84.63kB
5.2.60510.0
5/10/2018 11:41 PM
System.Web.Mvc.dll
542.13kB
5.2.60510.0
5/10/2018 11:38 PM
System.Web.Optimization.dll
69.20kB
1.1.40211.0
2/11/2014 3:26 PM
System.Web.Razor.dll
264.13kB
3.0.60510.0
5/10/2018 11:38 PM
System.Web.WebPages.Deployment.dll
48.63kB
3.0.60510.0
5/10/2018 11:42 PM
System.Web.WebPages.dll
208.14kB
3.0.60510.0
5/10/2018 11:42 PM
System.Web.WebPages.Razor.dll
46.63kB
3.0.60510.0
5/10/2018 11:42 PM
System.Xml.ReaderWriter.dll
22.72kB
4.6.24705.01
11/5/2016 12:57 PM
System.Xml.XmlDocument.dll
22.71kB
4.6.24705.01
11/5/2016 12:57 PM
System.Xml.XPath.dll
22.19kB
4.6.24705.01
11/5/2016 12:57 PM
System.Xml.XPath.XDocument.dll
24.73kB
4.6.24705.01
11/5/2016 12:57 PM
SystemInterface.dll
40.00kB
1.0.0.0
4/17/2019 10:25 PM
SystemInterface.xml
299.97kB
-
4/17/2019 10:25 PM
SystemWrapper.dll
68.50kB
0.5.0.0
4/17/2019 10:25 PM
SystemWrapper.xml
221.08kB
-
4/17/2019 10:25 PM
Task.PatchRepairTemplate.xml
2.16kB
-
9/9/2019 11:44 AM
TaskHandlerProxy.exe
22.42kB
11.0.1.1297
10/23/2019 2:30 AM
tmcdll.dll
1.77MB
11.0.1.1255
9/11/2019 1:35 PM
tmcdll_x64.dll
1.79MB
11.0.1.1255
9/11/2019 1:35 PM
tmcsrvr.dll
135.62kB
11.0.1.1057
1/21/2019 4:52 PM
Trout.exe
25.56kB
11.0.1.1017
12/11/2018 10:35 AM
tunnel.exe
1.50MB
1.1.0.15
1/29/2020 4:25 PM
TunnelManagerTest.exe
19.50kB
11.0.1.1045
1/15/2019 3:07 PM
vbc.exe
48.42kB
2.8.2.62916
5/16/2018 3:35 PM
VBCSCompiler.exe
85.92kB
2.8.2.62916
5/16/2018 3:35 PM
vcredist_x64.exe
9.80MB
10.0.40219.325
6/17/2019 4:27 PM
Version.xml
86.00 B
-
11/9/2018 7:50 AM
vulscan.dll
5.67MB
11.0.1.1379
1/21/2020 12:43 PM
WebGrease.dll
1.22MB
1.6.5135.21930
1/23/2014 1:57 PM
WindowsMDMConfigurationBehavior_Apply.dll
45.84kB
11.0.1.983
11/8/2018 10:46 AM
wscfg32.exe
531.56kB
11.0.1.1164
4/10/2019 3:43 PM
WSVulnerabilityCore.dll
77.31kB
11.0.1.1346
11/14/2019 11:44 AM